Intestinal absorption of dietary carotenoids

The assessment of carotenoid bioavailability has long been hampered by the limited knowledge of their absorption mechanisms. However, recent reports have elucidated important aspects of carotenoid digestion and absorption. Disruption of food matrix and increasing amounts of fat seem to enhance the absorption of carotenes to a larger extent than that of xanthophylls. Comparing different carotenoid species, xanthophylls seem to be more easily released from the food matrix and more efficiently micellized than the carotenes. On the other hand, carotenes are more efficiently taken up by the enterocytes. However, carotenoid emulsification and micellization steps are largely affected by the food matrix and dietary components, being the main determinant of carotenoid bioavailability from foodstuffs. Although the intestinal uptake of carotenoids has been thought to occur by simple diffusion, recent studies reported the existence of receptor-mediated transport of carotenoids in enterocytes. Comparisons between the intestinal absorption of a wide array of carotenoids would be useful to elucidate the absorption mechanism of each carotenoid species, in view of the recent indications that intestinal carotenoid uptake may involve the scavenger receptor class B type I and possibly other epithelial transporters. The unraveling of the whole mechanism underlying the absorption of carotenoids will be the challenge for future studies.     

Less Carcinogenic Chlorinated Estrogens Applicable to Hormone Replacement Therapy

Human estrogens prescribed for hormone replacement therapy (HRT) are known to be potent carcinogens. To find safer estrogens, several chlorinated estrogens were synthesized and their carcinogenic potential were determined. A pellet containing either 2-chloro-17β-estradiol (2-ClE₂) or 4-chloro-17β-estradiol (4-ClE₂) was implanted subcutaneously for 52 weeks into August Copenhagen Irish (ACI) rats, a preferred animal model for human breast cancer. 17β-Estradiol (E₂) frequently induced mammary tumors while both 2-ClE₂ and 4-ClE₂ did not. Their 17α-ethinyl forms, thought to be orally active estrogens, were also synthesized. Neither 2-chloro-17α-ethinylestradiol (2-ClEE₂) nor 4-chloro-17α-ethinylestradiol (4-ClEE₂) induced tumors. The less carcinogenic effects were supported by histological examination of mammary glands of ACI rats treated with the chlorinated estrogens. A chlorine atom positioned at the 2- or 4-position of E₂ may prevent the metabolic activation, resulting in reducing the carcinogenicity. 2-ClE₂ and 4-ClE₂ administered subcutaneously and 2-ClEE₂ and 4-ClEE₂ given orally to ovariectomized rats all showed uterotrophic potency, albeit slightly weaker than that of E₂. Our results indicate that less carcinogenic chlorinated estrogens retaining estrogenic potential could be safer alternatives to the carcinogenic estrogens now in use for HRT.     

Hetero-stereocomplex formation of stereoblock copolymer of substituted and non-substituted poly(lactide)s

The crystallization behavior of the stereoblock copolymer of substituted and non-substituted poly(lactide)s, i.e., poly(d-2-hydroxybutyrate) and poly(l-lactide) chains having the opposite configurations [P(D-2HB)-b-PLLA] and the reference block copolymer of poly(d-2-hydroxybutyrate) and poly(d-lactide) chains with the identical configurations [P(D-2HB)-b-PDLA] was investigated. At the crystallizable temperature range of 60-160 °C, the crystallized P(D-2HB)-b-PLLA contained solely the hetero-stereocomplex crystallites as a crystalline species, without formation of poly(d-2-hydroxybutyrate) or poly(l-lactide) homo-crystallites, in contrast with their polymer blends. On the other hand, at the crystallizable temperature range of 60-140 °C, the crystallized P(D-2HB)-b-PDLA had only PDLA homo-crystallites as crystalline species, reflecting no co-crystallites formation between poly(d-2-hydroxybutyrate) and poly(d-lactide) chains having the same configurations. The equilibrium melting temperature of hetero-stereocomplex crystallites in P(D-2HB)-b-PLLA was 189.0 °C, which was higher than 171.3 °C of PDLA homo-crystallites in P(D-2HB)-b-PDLA. Although the final crystallinity of P(D-2HB)-b-PLLA was higher than those of P(D-2HB)-b-PDLA, the spherulite growth rate of P(D-2HB)-b-PLLA was lower.The regime analysis indicated unusual nucleation mechanism of P(D-2HB)-b-PLLA.     

Inhibition effect of CO on hydrogen permeability of Pd–Ag membrane applied in a microchannel module configuration

The surface adsorption effect of CO on the hydrogen permeability of a 12.5 micron-thick Pd₇₇Ag₂₃ membrane has been evaluated quantitatively under experimental conditions close to the operating conditions of the highly-efficient membrane reformer (MRF) system developed by Tokyo Gas. The permeability of the membrane was measured in the conditions of CO concentration between 1 and 5 vol.% at a temperature and pressure of up to 500 °C and 0.6 MPa, respectively. High feed flow rates and a microchannel module configuration were applied in the flux measurements to ensure that the results are obtained with limited influence of concentration polarization adjacent to the membrane surface and hydrogen depletion along the microchannel length. While the CO inhibition effect was close to negligible at 500 °C, it was significant at lower temperatures. At a feed pressure of 0.2 MPa, the CO inhibition effect was only 0.2% at a CO concentration of 1 vol.% and the effect was 3.6% at a CO concentration of 5 vol.% at 500 °C. The CO inhibition effect were 3.4% for 1 vol.% CO and 14.1% for 5 vol.% CO at 400 °C. Measurements were also carried out at a high feed pressure of 0.6 MPa to evaluate the pressure dependence of the CO inhibition effect. The CO inhibition effect decreased to 0.7% at a CO feed concentration of 5 vol.% at 500 °C. Lower CO inhibition effect were also observed at 450 and 400 °C compared to the data obtained with the feed pressure of 0.2 MPa, while the inhibition levels were almost the same at 350 °C. Though the CO inhibition effect is larger at a lower feed pressure of 0.2 MPa, the effect was only 0.2% at 1 vol.% CO at 500 °C, which is close to the operating conditions of the MRF system. This study quantitatively revealed that the CO inhibition effect on hydrogen flux is extremely small when the membrane is operated at temperatures equal to or higher than 500 °C, even for state-of-the-art thin membranes. The performance of the Tokyo Gas MRF seems thus mainly limited by concentration polarization effects.     

Stereocomplex crystallization and spherulite growth behavior of poly(l-lactide)-b-poly(d-lactide) stereodiblock copolymers

The non-isothermally and isothermally crystallized stereodiblock copolymers of poly(l-lactide) (PLLA) and poly(d-lactide) (PDLA) with equimolar l-lactyl and d-lactyl units and different number-average molecular weights (M_n) of 3.9 × 10³, 9.3 × 10³, and 1.1 × 10⁴ g mol⁻¹, which are abbreviated as PLLA-b-PDLA copolymers, contained only stereocomplex crystallites as crystalline species, causing higher melting temperatures of the PLLA-b-PDLA copolymers compared to those of PLLA homopolymers. In the case of non-isothermal crystallization, the cold crystallization temperatures of the PLLA-b-PDLA copolymers during heating and cooling were respectively lower and higher than those of PLLA homopolymers, indicating accelerated crystallization of PLLA-b-PDLA copolymers. In the case of isothermal crystallization, in the crystallizable temperature range, the crystallinity (X_c) values of the PLLA-b-PDLA copolymers were lower than those of the PLLA homopolymers, and were susceptible to the effect of crystallization temperature in contrast to that of homopolymers. The radial growth rate of the spherulites (G) of the PLLA-b-PDLA copolymers was the highest at the middle M_n of 9.3 × 10³ g mol⁻¹. This trend is different from that of the PLLA homopolymers where the G values increased monotonically with a decrease in M_n, but seems to be caused by the upper critical M_n values of PLLA and PDLA chains as in the case of PLLA/PDLA blends (in other papers), above which homo-crystallites are formed in addition to stereocomplex crystallites. The disturbed crystallization of PLLA-b-PDLA copolymers compared to that of the PLLA/PDLA blend is attributable to the segmental connection between the PLLA and PDLA chains, which interrupted the free movement of those chains of the PLLA-b-PDLA copolymers during crystallization. The crystallite growth mechanism of the PLLA-b-PDLA copolymers was different from that of the PLLA/PDLA blend.     

Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D-lactic acid) and poly(L-lactic acid)

To obtain poly(lactic acid) (PLA) complex fibers, spinning was performed by wet and dry methods from 5–10 g/dL chloroform solutions of poly(D-lactic acid) (PDLA) and poly(L-lactic), both with a viscosity-average molecular weight of 3 × 10⁵. The dope was extruded from a monohole nozzle into coagulation baths from ethanol and chloroform for wet spinning and into a drying column kept at 60°C for dry spinning. Scanning electron microscopic observation of the as-spun fibers showed that the surface of the wet-spun fiber had large basins with diameters of 50–100 μm and many pores with diameters from sub μm to 10 μm, whereas the surface of dry-spun fiber had a microporous structure with the pore diameter of 1–3 μm. The tensile strength of the wet-spun complex fiber was very low and could not be drawn at high temperatures, in contrast to the dry-spun fiber. The tensile strength of dry-spun complex fiber increased upon hot drawing and showed the tensile strength of 94 kg/mm² by drawing at 160°C to the draw ratio of 13. Differential scanning calorimetry revealed that the complex fibers contained both the stereocomplex crystallites (racemic crystallites) and the crystallites of the single polymers, PDLA and PLLA, regardless of the spinning methods. The ratio of the racemic crystallites to the single-polymer crystallites increased with the draw ratio of the complex fiber. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of propylene‐α‐olefin random copolymers with isotactic propylene sequence. II. Propylene–hexene‐1 random copolymers

A series of novel hexene‐1–propylene random copolymers with isotactic sequence of propylene was synthesized with a MgCl₂‐supported Cr(acac)₃ catalyst. The molecular weight distribution of copolymers and homopolymers was considerably narrower than that of typical polyolefins produced by heterogeneous Ziegler–Natta catalysts. The crystallizability of the copolymers having a propylene‐unit content of more than 50 mol % drastically decreased with decreasing propylene‐unit content, and the copolymers with a propylene content of less than 50 mol % were completely amorphous. In the present novel type of random copolymers with crystallizable and noncrystallizable units, a single glass transition was observed between pure polypropylene and polyhexene‐1, and a major component was found to govern the final morphology and the mechanical characteristics. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2949–2954, 2004     

Hysteresis of critical currents of superconducting bridges in low perpendicular magnetic fields

Hysteresis of critcal currentsI _c of superconducting bridges with In, Nb, and NbN has been studied in low perpendicular magnetic fields. Influences of bridge geometry, small field sweep, trapped flux, and bombardment of argon ions on the hysteresis were made clear. The experimental results suggest that the edge pinning and trapped flux in the bank of bridges are associated with the hysteresis. The peak value ofI _c of NbN bridges, as well as granular Al and In bridges reported before, in decreasing fields agrees with the calculated pair-breaking current. The origin of the hysteresis is discussed.     

High recovery system in seawater reverse osmosis plants

Seawater desalination by the reverse osmosis (RO) method is an energy-saving system compared with the evaporating method, and can perform seawater desalination efficiently. Seawater RO desalination technology has been established and become a reliable system. Seawater desalination plants using RO technology have spread and the scale of the plants has increased significantly. More economical and efficient RO method seawater desalination systems have come to be required. A high recovery system, which offers reduction of plant construction cost and running cost was devised. Towards realization of this high recovery system, simulation and the field tests were done to confirm the practicality. Furthermore, a high recovery system was adopted for the biggest desalination plant in Japan, and it is performing favorably. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Investigation of low-angle laser light scattering patterns using the modified Twomey iterative method for particle sizing

We first applied the Twomey iteration method to the low-angle laser light scattering (LALLS) method. The Twomey method is known by the simple iteration algorithm for Fredholm integral equation. However, the algorithm is not applied to the LALLS result itself because the kernel function pattern is not stable. We solved the unstable kernel issue by modifying the Twomey algorithm to fit the LALLS data in this study. The performance of inversion was studied by computer simulation and experimental results from detectors containing 24 elements from angle 0.0005 to 2.5 rad. The computer simulation was carried out for particles of mean sizes from 0.1 to 1000 μm with mono-dispersion and log-normal distributions. A conventional algorithm is also carried out to compare the performance of the Twomey method. The noise effect of the inverse problem was tested by computer simulation. Experimental results were measured with standard polystyrene latex from 0.081 to 1007 μm. All the tests were performed under conditions in which the light from a linearly polarized laser at 633 nm was scattered by a diluted aqueous suspension. The modified Twomey (MT) method and conventional method show good reproduction results for particles with log-normal distributions. However, narrow distribution particles indicate that the MT method shows excellent reproduction results when compared with the conventional method.