Grindability of some additions and its significance in the production of mixed cements

Grinding tests were conducted in a laboratory steel ball mill, to investigate the grind-ability of some natural and artificial materials as “additions” for incorporation in Portland cement. Strength tests were performed on mixed cements composed of 71% Portland cement clinker, 25% addition and 4% gypsum. In one series of experiments, the components of the mixed cement were separately ground and in another one they were simultaneously ground. It was found from surface production curves and from compressive strength data that when materials which are harder to grind than clinker such as sand are interground with clinker, the resulting cement develops higher early strength than a corresponding cement in which the pozzolanic addition is softer than clinker. For materials which are softer to grind than clinker, separate grinding of the cement components is better than combined grinding, particularly for the development of early strength.     

Neutral electrolyzed water (NEW), chlorine dioxide,organic acid based product,and ultraviolet‐C for inactivation of microbes in fresh‐cut vegetable washing waters

The effect of decontamination methods on fresh‐cut vegetable washing waters was evaluated. NEW, ClO₂, organic acid‐based product FPW, and UV‐C were tested with and without an interfering carrot juice of 1% (IS), on Yersinia enterocolitica and Yersinia pseudotuberculosis, Escherichia coli, and yeast Candida lambica. The use of ClO₂ (50 ppm active chlorine) resulted in >4 log reduction of Y. enterocolitica, Y. pseudotuberculosis, E. coli and >3 log reduction of C. lambica. The antibacterial effect of NEW was less effective in the presence of IS when compared with ClO_2. The inactivation of C. lambica by FPW reached a maximum of 2.8 log cfu/mL (concentration 0.125%), but the antimicrobial effect was delayed by the IS. The effect of FPW on E. coli was significantly reduced by 1% IS. The inactivation of E. coli and C. lambica with UV‐C IS decreased the inactivation and lengthened its time. Filtration improved the effect of UV‐C inactivation.

Practical applications

When chemical decontamination methods were used in fresh‐cut vegetable processing, the presence of organic matter in process water increased the reaction times and the need for higher concentrations of the chemical decontamination and the time of physical decontamination. Yersinia required longer inactivation times than E. coli. When UV‐C is used for decontamination of process waters, waters should be filtered to enhance the disinfection efficacy.     

The Effect of Leptin on the Blood Hormonal Profile (Cortisol,Insulin, Thyroid Hormones) of the Ewe in Acute Inflammation in Two Different Photoperiodical Conditions

As a day animal with sensitivity to inflammation similar to that of humans, the sheep may highly outperform the rodent model in inflammation studies. Additionally, seasonality makes sheep an interesting model in endocrinology research. Although there are studies concerning inflammation’s influence on leptin secretion and vice versa, a ewe model, with its possible ‘long-day leptin resistance’, is still not examined enough. The present study aimed to examine whether leptin may modulate an acute inflammation influence on plasma hormones in two photoperiodical conditions. The experiment was conducted on 48 ewes divided into four groups (control, lipopolysaccharide (LPS), leptin, LPS + leptin) during short and long days. Blood sampling started 1 hour before and continued 3 h after LPS/saline administration for further hormonal analysis. The results showed that the photoperiod is one of the main factors influencing the basal concentrations of several hormones with higher values of leptin, insulin and thyroid hormones during long days. Additionally, the acute inflammation effect on cortisol, insulin and thyroid hormones was photoperiod-dependent. The endotoxemia may also exert an influence on leptin concentration regardless of season. The effects of leptin alone on hormone blood concentrations are rather limited; however, leptin can modulate the LPS influence on insulin or thyroxine in a photoperiod-dependent way.     

Éditorial: Enfin,une voix canadienne!

Abstract

This article investigates some of the specific features involved in accommodating the idea of actual infinity as it appears in set theory. It focuses on the conceptions of two individuals with sophisticated mathematics background, as manifested in their engagement with variations of a well-known paradox: the ping-pong ball conundrum. The APOS theory is used as a framework to interpret participants’ efforts to resolve the paradoxes. The cases discussed focus on how transfinite subtraction may be conceptualized, and they suggest that there is more to accommodating the idea of actual infinity than the ability to act on a completed object—rather, it is the manner in which objects are acted upon that is also significant.     

Experiments on Surface Reconstruction for Partially Submerged Marine Structures

Over the past 10 years, significant scientific effort has been dedicated to the problem of three‐dimensional (3‐D) surface reconstruction for structural systems. However, the critical area of marine structures remains insufficiently studied. The research presented here focuses on the problem of 3‐D surface reconstruction in the marine environment. This paper summarizes our hardware, software, and experimental contributions on surface reconstruction over the past few years (2008–2011). We propose the use of off‐the‐shelf sensors and a robotic platform to scan marine structures both above and below the waterline, and we develop a method and software system that uses the Ball Pivoting Algorithm (BPA) and the Poisson reconstruction algorithm to reconstruct 3‐D surface models of marine structures from the scanned data. We have tested our hardware and software systems extensively in Singapore waters, including operating in rough waters, where water currents are around 1–2 m/s. We present results on construction of various 3‐D models of marine structures, including slowly moving structures such as floating platforms, moving boats, and stationary jetties. Furthermore, the proposed surface reconstruction algorithm makes no use of any navigation sensor such as GPS, a Doppler velocity log, or an inertial navigation system.     

Creation of arteriovenous fistulae for hemodialysis in octogenarians

Elderly patients, defined as octogenarians and nonagenarians, are an increasing population entering renal replacement therapy. Advanced age appears as an exclusive factor negatively influencing dialysis practice. Elderly patients are referred late for the initiation of hemodialysis and more likely are offered catheters rather than arteriovenous fistulae (AVF), which increase mortality and negatively affect quality of life. We present our approach to the creation of vascular access for hemodialysis in this demanding population. In 2006–2012, 39 patients aged 85.9 ± 2.05 with end‐stage renal disease, mainly resulting from ischemic nephropathy, were admitted to the Department of Nephrology to establish permanent vascular access for hemodialysis: preferably AVF. Temporary dialysis catheters were implanted in uremic emergency to bridge the time to fistula creation/maturation. AVF was attempted in 87.2% of the patients. Primary AVF function was achieved in 54% of the patients. Cumulative proportional survival of AVF at months 12 and 24 was 81.5%. Ninety‐four percent of AVF were localized on the forearm: 74% in the distal and 20% in the proximal part. Mean duration of hemodialysis therapy was 20.80 ± 19.45 months. The mean time of AVF use was 15.9 ± 20.2 months. Until present, 38% have been dialyzed using AVF for 31.0 ± 18.8 months. Five patients died with functioning fistula. Eight patients initiated hemodialysis therapy with fistula. During further observation, the use of AVF increased to 62%. Elderly patients should not be denied creation of AVF as a rule. The outcome of AVF benefits more from acknowledging individual vascular conditions rather than age of the patient.     

Functional Peptide Monolayers at Interfaces

Amphiphilic peptides can be designed to form ordered supramolecular structures at hydrophilic-hydrophobic interfaces. These systems rely on the ability of peptides to fold into certain secondary structures at interfaces. This review focuses on the design of amphiphilic β-sheet peptide assemblies in monolayers at interfaces, and their relevance to inducing mineralization and interactions with specific ions. In addition, the review discusses recent studies demonstrating the applicability of designed amphiphilic β-sheet peptides to detection of specific small molecules and to elucidating intermolecular interactions relevant to drug delivery and enzyme catalysis systems.     

Preparation of dual‐layer acetylated methyl cellulose hollow fiber membranes via co‐extrusion using thermally induced phase separation and non‐solvent induced phase separation methods

Dual‐layer acetylated methyl cellulose (AMC) hollow fiber membranes were prepared by coupling the thermally induced phase separation (TIPS) and non‐solvent induced phase separation (NIPS) methods through a co‐extrusion process. The TIPS layer was optimized by investigating the effects of coagulant composition on morphology and tensile strength. The solvent in the aqueous coagulation bath caused both delayed liquid–liquid demixing and decreased polymer concentration at the membrane surface, leading to porous structure. The addition of an additive (triethylene glycol, (TEG)) to the NIPS solution resolved the adhesion instability problem of the TIPS and NIPS layers, which occurred due to the different phase separation rates. The dual‐layer AMC membrane showed good mechanical strength and performance. Comparison of the fouling resistance of the AMC membranes with dual‐layer polyvinylidene fluoride (PVDF) hollow fiber membranes fabricated with the same method revealed less fouling of the AMC than the PVDF hollow fiber membrane. This study demonstrated that a dual‐layer AMC membrane with good mechanical strength, performance, and fouling resistance can be successfully fabricated by a one‐step process of TIPS and NIPS. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42715.