Probabilistic stability of uncertain composite plates and stochastic irregularity in their buckling mode shapes: A semi-analytical non-intrusive approach

In this study, the mechanical properties of the composite plate were considered Gaussian random fields and their effects on the buckling load and corresponding mode shapes were studied by developing a semi-analytical non-intrusive approach. The random fields were decomposed by the Karhunen−Loève method. The strains were defined based on the assumptions of the first-order and higher-order shear-deformation theories. Stochastic equations of motion were extracted using Euler–Lagrange equations. The probabilistic response space was obtained by employing the non-intrusive polynomial chaos method. Finally, the effect of spatially varying stochastic properties on the critical load of the plate and the irregularity of buckling mode shapes and their sequences were studied for the first time. Our findings showed that different shear deformation plate theories could significantly influence the reliability of thicker plates under compressive loading. It is suggested that a linear relationship exists between the mechanical properties’ variation coefficient and critical loads’ variation coefficient. Also, in modeling the plate properties as random fields, a significant stochastic irregularity is obtained in buckling mode shapes, which is crucial in practical applications.     

Electromagnetic Design and Analysis of a Novel Axial-Transverse Flux Permanent Magnet Synchronous Machine

This paper analyzes a novel hybrid axial-transverse flux permanent magnet (PM) synchronous motor achieving high torque density. The stator pole pitch and the rotor pole pitch are the same. The motor is suitable for vehicle traction systems. The new axial-transverse machine has a single-sided or double-sided air gap. The machine has two adjacent quasi-U stator cores with ring-type winding, and the rotor has two PM groups, one outer and one inner. The shape of quasi-U stator core allows changing the flux path without changing power supply polarity. The analytical expressions of the no-load back-EMF and the torque are derived, after the development of 3-D magnetic equivalent circuit (MEC) model. The 3-D finite element method (FEM) is used to analyze the magnetic field, torque, and cogging torque for different skewings of the PMs.     

Mechanical, rheological, and thermal behavior assessments in HDPE/PA-6/EVOH ternary blends with variable morphology

Visco-elastic and dielectric spectra of multiwalled carbon-nanotube reinforced silicon elastomer nanocomposites were used to study relaxation behavior. SEM photomicrographs shows well dispersion of MWCNT in elastomer matrix. In visco-elastic analysis primary relaxation was studied as a function of temperature (?100 to 100 °C) at frequency 1Hz and strain 1 %. The effect of MWCNT loadings on storage modulus, loss modulus, and loss tangent has been studied. The non-linearity in loss tangent, storage modulus and loss modulus was explained on the basis of MWCNT-elastomer interaction and the inter-aggregate attraction of MWCNT. The secondary β relaxation was studied using dielectric relaxation spectra in the frequency range of 0.1 Hz to 10⁶ Hz. The effect of MWCNT loadings on the complex and real parts of impedance was distinctly visible which has been explained on the basis of interfacial polarization of fillers in a heterogeneous medium and relaxation dynamics of polymer chains in the vicinity of fillers. The dielectric formalism has been utilized to further investigate the conductivity and relaxation phenomenon. The ‘percolation limit’ of the MWCNT in the silicon elastomer was found to be in the range of 4 phr loading.     

Optimal control of steel structures by improved particle swarm

Active control is one of the modern approaches in seismic design of steel structures. Recently, induced by economic considerations, especially high expenses of control systems, optimality has become an important issue. In this paper an active system is used to control a steel structure’s displacements by a simplified pole assignment method. To optimize the number, the locations, and the total driving force of the required actuators, an improved particle swarm algorithm is presented focusing on the parameters of the velocity equation. A Geographical neighborhood topology and an adaptive inertia weight are used to improve the standard PSO algorithm. In addition to the local and global best solutions, the positions of the best particles in the geographical neighborhood are mathematically represented in an additional term. The performance of the proposed algorithm is compared with the traditional Genetic Algorithm (GA) and the standard particle swarm considering the optimal control of a 12-story steel structure as a numerical example. High capabilities of the proposed method in terms of the control target, convergence rate, and accuracy are simultaneously clarified by the results.     

A Dempster–Shafer Based Tit-for-Tat Strategy to Regulate the Cooperation in VANET Using QoS-OLSR Protocol

In this paper, we address the problem of cooperation among vehicles in VANET using QoS-OLSR protocol in the presence of selfish nodes. QoS-OLSR is a proactive protocol that considers the Quality of Service (QoS) of the nodes while electing the cluster-heads and selecting the Multi-Point Relay (MPRs) nodes. Cluster-heads and MPRs might misbehave on the roads by over-speeding or under-speeding. Classical and generous Tit-for-Tats are proposed to analyze the interaction among vehicles. However, both strategies are not able to enforce the cooperation due the fact that they (1) count on individual watchdogs monitoring, (2) rely on the node-to-node cooperation decision, (3) and ignore the high mobility and packet collisions. Therefore, we propose a Dempster–Shafer based Tit-for-Tat strategy that is able to improve the decision and regulate the cooperation in the vehicular network. This is done by (1) launching a cooperative watchdogs monitoring, (2) correlating the observations of the different watchdogs using Dempster–Shafer theory, and (3) propagating the decisions among clusters. Thereafter, we compare the Dempster–Shafer based strategy with several strategies derived from the original Tit-for-Tat. Simulation results prove that the Dempster–Shafer based strategy is able to maintain the survivability of the vehicular network in the presence of high mobility and packet collisions with minimal time and overhead.     

Combined Computational and Experimental Study on the Adsorption and Inhibition Effects of N2O2 Schiff Base on the Corrosion of API 5L Grade B Steel in 1 mol/L HCI

The electrochemical behavior of low carbon steel （API 5L grade B） in 1 mol/L HCI solution with different concentrations of N,Nr-bis（4-formylphenol）-trimethylenediamine Schiff base was studied by electrochemical techniques and density functional theory analysis. The inhibition efficiency was found to increase with increasing inhibitor concentration and decreased with increasing temperature. The high inhibition efficiency was attributed to the blocking of active sites by adsorption of inhibitor molecules on the steel surface. Thermodynamic parameters for the adsorption and activation processes were determined. Galvanostatic polarization data indicated that Schiff base act as a mixed-type inhibitor and the adsorption isotherm obeyed the Langmuir adsorption isotherm. Results obtained from quantum chemical studies show excellent correlations between the quantum chemical parameters and the experimental inhibition efficiencies using density functional theory at the B3LYP/6-31G（d,p） and B3LYP/3-21G basis set levels and ab initio calculations using HF/6-31G（d,p） and HF/3-21G methods.     

A nondominated ranked genetic algorithm for bi-objective single machine preemptive scheduling in just-in-time environment

Motivated by just-in-time (JIT) manufacturing, we study the bi-objective scheduling problem of minimizing the total weighted earliness and the number of tardy jobs on a single machine, in which machine idle time and preemption are allowed. The problem is known to be NP-hard. In this paper, we propose a new mathematical model, with nonlinear terms and integer variables which cannot be solved efficiently for medium- and large-sized problems. A method combining the new ranked-based roulette wheel selection algorithm with Pareto-based population ranking algorithm, named nondominated ranking genetic algorithm (NRGA), has been presented to find nondominated solutions in a reasonable time. Various operators and parameters of the proposed algorithm are reviewed to calibrate the algorithm by means of the Taguchi method. A number of numerical examples are solved to demonstrate the effectiveness of the proposed approach. The solutions obtained via NRGA are compared against solutions obtained via ε-constraint method in small-sized problems. Experimental results show that the proposed NRGA is competitive in terms of the quality and diversity of solutions in medium- and large-sized problems.     

Influence of substrate rotation speed on the nanostructure of sculptured Cu thin films

Different rotation speeds of the substrate about its surface normal were used to produce sculptured copper thin films of ∼ 90 nm thickness. X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) were employed to obtain nano-structure and morphology of these films. Their optical properties were measured by spectrophotometry in the spectral range of 340-850 nm. Real and imaginary refractive indices, film thickness and fraction of metal inclusion in the film structure were obtained from optical fitting of the spectrophotometer data.     

Emergence of non-group A streptococcal necrotizing diabetic foot infections

Recently the authors have noted a disturbing trend toward an increased incidence of necrotizing infections caused by non-group A streptococcal species. This article describes the typical clinical course of such an infection. Prompt surgical intervention, coupled with an antibiotic regimen aimed at mitigating exotoxin release, may be both limb- and life-preserving.