Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: Theory

This paper deals with the formulation, calibration, and validation of the Lattice Discrete Particle Model (LDPM) suitable for the simulation of the failure behavior of concrete. LDPM simulates concrete at the meso-scale considered to be the length scale of coarse aggregate pieces. LDPM is formulated in the framework of discrete models for which the unknown displacement field is not continuous but only defined at a finite number of points representing the center of aggregate particles. Size and distribution of the particles are obtained according to the actual aggregate size distribution of concrete. Discrete compatibility and equilibrium equations are used to formulate the governing equations of the LDPM computational framework. Particle contact behavior represents the mechanical interaction among adjacent aggregate particles through the embedding mortar. Such interaction is governed by meso-scale constitutive equations simulating meso-scale tensile fracturing with strain-softening, cohesive and frictional shearing, and nonlinear compressive behavior with strain-hardening. The present, Part I, of this two-part study deals with model formulation leaving model calibration and validation to the subsequent Part II.     

Modeling of thin-film slurry photocatalytic reactors affected by radiation scattering

Photocatalytic oxidation over titanium dioxide is a "green" sustainable process for treatment and purification of water and wastewater. A dimensionless model for steady-state, continuous flow, thin-film, slurry (TFS) photocatalytic reactors for water purification using solar radiation and UV lamps is presented and validated. The model is applicable to TFS flat plate and annular photoreactors of (a) falling film or (b) double-skin designs, operating with three ideal flows: (1) falling film laminar flow (FFLF), (2) plug flow (PF) and (3) slitflow (SF). Model parameters can be estimated easily from real systems, and solutions can be obtained with modest computational efforts. A modified two-flux absorption-scattering model models the radiation field in the photoreactor. Model simulations show that at a scattering albedo higher than 0.3, radiation scattering can significantly affect conversions obtained at different values of optical thickness. However, at lower values, the effect of scattering on conversions is negligible. The conversions with the idealized flow systems follow the sequence FFLF > PF > SF. SF operation should always be avoided. The model estimates the optimum value of optical thickness that maximizes conversion in a photocatalytic reactor. Optimal design of TFS photocatalytic reactors using the photocatalyst TiO2 Degussa P25 requires an optical thickness in the range from 1.8 to 3.4 depending on flow conditions and reaction kinetics.     

Carbon nanotubes play an important role in the spatial arrangement of calcium deposits in hydrogels for bone regeneration

Age related bone diseases such as osteoporosis are considered among the main causes of reduced bone mechanical stability and bone fractures. In order to restore both biological and mechanical function of diseased/fractured bones, novel bioactive scaffolds that mimic the bone structure are constantly under development in tissue engineering applications. Among the possible candidates, chitosan-based thermosensitive hydrogel scaffolds represent ideal systems due to their biocompatibility, biodegradability, enhanced antibacterial properties, promotion of osteoblast formation and ease of injection, which makes them suitable for less invasive surgical procedures. As a main drawback, these chitosan systems present poor mechanical performance that could not support load-bearing applications. In order to produce more mechanically-competent biomaterials, the combined addition of hydroxyapatite and carbon nanotubes (CNTs) is proposed in this study. Specifically, the aim of this work is to develop thermosensitive chitosan hydrogels containing stabilised single-walled and multi-walled CNTs, where their effect on the mechanical/physiochemical properties, calcium deposition patterns and ability to provide a platform for the controlled release of protein drugs was investigated. It was found that the addition of CNTs had a significant effect on the sol–gel transition time and significantly increased the resistance to compression for the hydrogels. Moreover, in vitro calcification studies revealed that CNTs played a major role in the spatial arrangements of newly formed calcium deposits in the composite materials studied, suggesting that they may have a role in the way the repair of fragile and/or fractured bones occurs in vivo.     

Using a neural network for predicting the average grain size in friction stir welding processes

In the paper the microstructural phenomena in terms of average grain size occurring in friction stir welding (FSW) processes are focused. A neural network was linked to a finite element model (FEM) of the process to predict the average grain size values. The utilized net was trained starting from experimental data and numerical results of butt joints and then tested on further butt, lap and T-joints. The obtained results show the capability of the AI technique in conjunction with the FE tool to predict the final microstructure in the FSW joints.     

Novel JPEG 2000 Compliant DWT and IWT VLSI Implementations

This paper proposes two JPEG 2000 compliant architectures: one for DWT (Discrete Wavelet Transform) and one for IWT (Integer Wavelet Transform) implementation. First of all some theoretical issues about DWT and IWT are discussed, then, starting from transforms characteristics, the architectures are presented showing both performance and cost. In the literature many DWT architectures have been proposed; our implementation is a new architecture that computes the DWT using filters of interest for the forthcoming JPEG 2000 standard. Moreover, we propose a Lifting Scheme based architecture for IWT, JPEG 2000 compliant too. The proposed architectures are able to support real-time streams: the DWT one, which is made of 20,000 cells, with an input throughput of 160 Msamples per second and a clock frequency of 160 MHz, the IWT one, consisting of 50,000 cells, with an input throughput of 4.5 Msamples per second and an internal clock frequency of 108 MHz.     

Catalytic MTO-based C–H insertion reactions of hydrogen peroxide: an investigation on the polymeric support role in heterogeneous conditions

Polymer-supported methyltrioxorhenium (MTO) compounds are shown to act as efficient and selective catalysts for the oxy-functionalization of C–H bonds in representative hydrocarbon derivatives (leading to the corresponding alcohols or ketones), using H₂O₂ as oxidant. The different supports used for the heterogenation of MTO, such as poly(4-vinylpyridine), poly(4-vinylpyridine)-N-oxide and polystyrene resins, all showed different catalytic behaviour in terms of substrate conversion and product yield, depending on the experimental conditions used. It is noteworthy that the novel heterogeneous catalysts were found to be stable, it being possible to effect their recover and recycle at least five times without appreciable loss of activity.     

用于无刷电机旋转测量的无传感器型控制

引言在家用电器、供暖、通风、空调)和汽车应用中,DC无刷电机及其驱动器的使用率越来越高。造成这种现象的原因是其所拥有的高效、可靠、紧凑、低维护等级以及低噪声等优点,而这些都将转化为成本的节省。家用电器常常运用传统技术,比如带有起动电容的AC磁阻单相电机和通用式电机。所有这些解决方案采用AC供电方式,工作速度都是恒定不变的,而且并未关注效率。如今,客户所提出的要求越来越多,他们渴望拥有改良型功率分配方案、更加优越的性能以及更低的噪声电平:传统技术的局限性正日益凸显出来。同时,市场竞争对能量-效率比提出了新的更高…     

Monitoring food quality by microfluidic electrophoresis, gas chromatography, and mass spectrometry techniques: effects of aquaculture on the sea bass (Dicentrarchus labrax)

Monitoring food quality is a critical task for analytical chemistry and an important way to preserve human health. Fish is a valuable source of highly digestible proteins and contains large amounts of polyunsaturated fatty acids and fat-soluble vitamins. Since the world's wild fish stocks are limited, farmed fish is nowadays proposed as an alternative to consumers. It is now emerging that the fish muscle protein content is assuming great importance from an aquaculture perspective. Many data have been collected on the physiology and biochemistry of fish muscle, but few proteomic studies are available on farmed fish. Application of proteomics to aquaculture may play a key role in the development of new farming strategies. In this paper, a proteomic approach based on SDS-PAGE separation of proteins, in situ protein hydrolysis, de novo sequencing of peptides by MALDI and ESI MS(2), protein identification, and relative quantitation of protein by denaturing capillary electrophoresis was coupled with the determination of fatty acids and metal ions content by GM-MS and ICPMS in farmed and wild sea bass filet. Our results show that aquaculture could induce significant chemical and biochemical differences in fish muscle that may have an impact on food quality.     

Structure control, coating properties, and durability of fluorinated acrylic-based polymers

Fluorinated acrylates were employed for the synthesis of conventional, side-chain fluorinated, fully acrylic random copolymers, and of more unusual hybrid copolymers with vinyl ethers. The latter can feature alternating structure and peculiar material properties associated with fluorine or fluorinated groups substitution onto the polymer backbone. Improved efficacy and durability of the resulting coating, highly desirable for the consolidation and protection of highly valued works of art, was achieved through a systematic approach involving a detailed study of their photodegradation behavior, and extensive testing of protection efficacy upon application onto micro-and macroporous stone substrates of different chemical composition and morphology. Presented on behalf of FATIPEC (AITIVA) at the 78th Annual Meeting of the FSCT in Chicago, IL on October 16–20, 2000. Dipartimento di Chimica e Chimica Industriale, Via Risorgimento 35, 56126 Pisa, Italy. Dipartimento di Chimica IFM, via Pietro Giuria 7, 10125 Torino, Italy. Piazza Leonardo da Vinci 32, 20133 Milano, Italy, Lucia.