Structural investigations on TiO2 and Fe-doped TiO2 nanoparticles synthesized by laser pyrolysis

Undoped and Fe-doped TiO₂ nanopowders with Fe/Ti (atomic ratio) precursor concentration ranging from 7% up to 25% have been prepared by the IR laser pyrolysis technique. A sensitized mixture of TiCl₄ and Fe (CO)₅ was used as titanium and iron precursor, respectively. Reference undoped titania samples with a major concentration of anatase phase (about 90%) were obtained by the same technique by using very high flows of the oxidizing agent (air). The effects of the iron-dopant concentration on the essential structural properties of the resultant powders such as the phase formation, the crystallinity, the average particle size and distributions were systematically investigated by X-ray diffraction, Raman spectroscopy and transmission electron microscopy. The decrease of the TiO₂-anatase crystalline phase, the simultaneous increase of the amorphous phase and the decrease in size of particle mean diameter appear as main effects induced by the Fe-dopant concentration.     

The effect of HRG gas addition on diesel engine combustion characteristics and exhaust emissions

Extensive studies have been dedicated in the last decade to the possibility to use hydrogen in the dual-fuel mode to improve combustion characteristics and emissions of a diesel engine. The results of these studies, using pure hydrogen or hydrogen containing gas produced through water electrolysis, are notably different.The present investigation was conducted on a tractor diesel engine running with small amounts of the gas—provided by a water electrolyzer—aspirated in the air stream inducted in the cylinder. The engine was operated at light and medium loads and various speeds.It was found that the addition of HRG gas has a slight negative impact, up to 2%, on the engine brake thermal efficiency. Smoke is significantly reduced, up to 30%, with HRG enrichment, while NO_x concentrations vary in both senses, up to 14%, depending on the engine operation mode. A relative small amount of HRG gas can be used with favorable effects on emissions and with a small penalty in thermal efficiency.     

Cost and optimal feed-in tariff for small scale photovoltaic systems in China

China has recently become a dominant player in the solar photovoltaic (PV) industry, producing more than one-third of the global supply of solar cells in 2008. However, as of 2008, less than 1% of global installations were based in China. Recently, the government has stated its grand ambitions of expanding the share of electricity derived from solar power. As part of this initiative, policy makers are currently in the process of drafting a feed-in tariff policy to support the development of the solar energy market. In this paper, we aim to calculate what the level of such a tariff should be. We develop a closed form equation for the cost of PV, and use forecasts on prices of solar systems to derive an optimal feed-in tariff, including a digression rate. The focus is on the potential of residential and small scale commercial solar PV installations. We show that the cost of small scale PV in China has decreased rapidly during the period 2005–2009. Our analysis also shows that optimal feed-in tariffs vary widely between regions within China, and that grid parity could be reached in large parts of the country depending on the expected escalation in electricity prices.     

A comparison between the performances of CDMA multiuser detectors for binary image transmission

This article presents the results obtained by using CDMA multiuser detectors structures when binary images are transmitted. The performances are compared in terms of bit error rate as well as peak signal-to-noise ratio as functions of the channel signal-to-noise ratio and for different transmission scenarios. In the final section, several interesting conclusions are highlighted.     

On the Elastic Coupling Through the Flux Lines and Magnetic Interaction

It is defined the magnetic interaction energy between two superconductor pieces situated in a magnetic field by using the elastic coupling through the flux lines. On this basis, it is shown that a force between a superconducting material and a source of magnetic field is always repulsive, the force between a ferromagnetic material and a source of magnetic field is always attractive and a force between a normal metal and a source of time-varying magnetic field is always repulsive.     

A study on the mechanism of reaction between refractory materials and aluminium deoxidised molten steel

The conditions of formation of inclusions in steel during ladle refining in MgO-C lined ladles have been investigated in laboratory experiments at 1873 K in MgO-C crucibles with 50 g iron. From both the experimental results as well those of a thermodynamic study conducted in parallel, the following conclusions can be made about the reaction mechanism between the MgO-C refractory and aluminium deoxidised molten steel: At steelmaking temperature an internal oxidation-reduction occurs in the MgO-C refractory. The formation of a thin oxide layer at the interface is due to the reaction between magnesium vapour and aluminium dissolved into the molten steel and the CO(g) generated by the reaction between MgO and C in the crucible walls. The oxide inclusions formed in the steel have been shown mainly to consist of MgO, Al₂O₃ or mixture of them. Some of the finest inclusions are considered to be formed as secondary inclusions during cooling and solidification of the steel and they are connected only with the diffusion of magnesium from the crucible to the molten steel. The thermodynamic calculations indicate that during vacuum refining, as the pressure decreases, the chemical compatibility of carbon-bonded magnesia for ladle lining decreases.     

Propagation of material and surface profile uncertainties on MEMS micro‐resonators using a stochastic second‐order computational multi‐scale approach

This paper aims at accounting for the uncertainties because of material structure and surface topology of micro‐beams in a stochastic multi‐scale model. For micro‐resonators made of anisotropic polycrystalline materials, micro‐scale uncertainties exist because of the grain size, grain orientation, and the surface profile. First, micro‐scale realizations of stochastic volume elements are obtained based on experimental measurements. To account for the surface roughness, the stochastic volume elements are defined as a volume element having the same thickness as the microelectromechanical system (MEMS), with a view to the use of a plate model at the structural scale. The uncertainties are then propagated up to an intermediate scale, the meso‐scale, through a second‐order homogenization procedure. From the meso‐scale plate‐resultant material property realizations, a spatially correlated random field of the in‐plane, out‐of‐plane, and cross‐resultant material tensors can be characterized. Owing to this characterized random field, realizations of MEMS‐scale problems can be defined on a plate finite element model. Samples of the macro‐scale quantity of interest can then be computed by relying on a Monte Carlo simulation procedure. As a case study, the resonance frequency of MEMS micro‐beams is investigated for different uncertainty cases, such as grain‐preferred orientations and surface roughness effects. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermoanalytical and infrared spectroscopy investigations of some mineral pastes containing organic polymers

The interaction in the presence of water between organic polymers [two polyvinyl alcohol acetate (PVA1 and PVA2)-, one polyvinyl acetate (PVAc)-, and one acryloethyl-metacrylomethyl (R)-type copolymers] and inorganic materials (3CaO·Al₂O₃+CaSO₄·2H₂O, 12CaO·7Al₂O₃, and CaO·Al₂O₃) was investigated using complex thermal analyses and infrared (IR) spectroscopy. The DTA curves of the 1-to 28-day-hydrated organo-mineral composite samples showed some significant differences in comparison with those of the hydrated inorganic materials. The most important differences consist in the presence of some exothermic peaks that are not attributable to the pure organic polymers. More than that, none of the specific effects of the pure organic polymers are evidenced on the DTA curves of the hydrated organo-mineral composite materials. This, in connection with their IR spectra, which clearly evidence the disappearance of some investigated polymers specific IR bands, can be considered as an indirect evidence of the cross-linking of polymer chains via metal ions.     

On the Electrical Interaction as an Elastic Coupling Through the Flux Lines

By using the elastic coupling through the field lines, we present a new theoretical treatment of the electrical interaction. We consider both static and oscillatory fields. The obtained results show that the static interaction energy is in reverse proportion with respect to the distance between the centers of the two bodies whereas the oscillatory interaction energy contains two terms: one which is in reverse proportion with respect to the third power of this distance and the other which is in reverse proportion with this distance. The latter term appears because of retardation. An attraction between the two charged particles of the same sign may appear if the oscillatory energy of interaction is larger than the static energy of interaction. This is the case of the electron pairs in superconductors.