Phase equilibria of crude oils using the continuous thermodynamics approach

This paper deals with the application of continuous thermodynamics to light and heavy oil systems using the Peng- Robinson equation of state. The composition of the high molar mass components in a reservoir oil is described by a continuous distribution function of some characterizing quantity, e.g. molar mass or boiling temperature. Numerical Gaussian quadrature methods are used to generate pseudo-components and their mole fractions from distribution data. Several examples are presented for phase equilibria of solvent/crude oil systems. The results showed that semi-infinite distribution functions, such as the Γ function, cannot be applied to all cases, e.g. dew point calculations. The Gauss- Legendre quadrature method coupled with spline fitting worked best for heavy oil systems.     

Analysis of characteristic odors from human male axillae

A number of studies concerning the analysis of axillary odors have assumed that the characteristic odor produced in the axillae is due to volatile steroids and isovaleric acid. Organoleptic evaluation of Chromatographic eluants from axillary extracts was employed to isolate the region in the chromatogram where the characteristic odor eluted. The odor of the dissolved eluant was eliminated when it was treated with base, suggesting that acids make up the characteristic axillary odor. Subsequent extraction of the pH-adjusted axillary extract in conjunction with organoleptic evaluation of the Chromatographic eluant, preparative gas chromatography, and analysis by GC-MS as well as GC-FTIR showed the presence of a number of C₆ to C₁₁ straight-chain, branched, and unsaturated acids as important contributors to the axillary odor. The major odor component is (E)-3-methyl-2-hexenoic acid. Three homologous series of minor components are also important odor contributors; these consist of the terminally unsaturated acids, the 2-methyl-C₆ to -C₁₀ acids and the 4-ethyl-C₅ to -C₁₁ acids. These types of acids have not been reported previously as components of the human axillary secretions and have not been proposed previously as part of the principal odor components in this area.     

Conflicts in Africa as Compound Disasters: Complex Crises Requiring Comprehensive Responses

This paper reflects on African conflicts as compound disasters. A compound disaster is defined as an emergency situation with adverse consequences resulting from different, but related, disaster-agents (ICLA, 1996). In a natural disaster situation, for instance, an earthquake that is quickly followed by a fire outbreak, gas leakage, the disruption of water supply and the outbreak of water-borne diseases, would be regarded as a compound disaster. Similarly, armed conflicts trigger a chain of consequences. The focus of this paper is the complexity of the consequences and impact of conflicts in Africa. To a lesser extent, the paper looks at the complex causes of the conflicts themselves and, finally, examines challenges with regard to responses.     

Measles, polio and tetanus toxoid antibody levels in Gambian children aged 3 to 4 years following routine vaccination

A nation-wide cross-sectional survey of 816 children 3-4 years old was carried out in The Gambia between September 1990 and July 1991 to assess the seroprevalence of antibodies against 3 diseases included in the expanded programme on immunization: measles, poliomyelitis and tetanus. Among 689 children whose records were available, 94.5% were fully immunized. Measles vaccine was administered to 97% of the children and 91% of these had detectable antibodies at the time of the survey. Antibodies against type 1 and type 3 polioviruses, after up to 6 doses of oral polio vaccine, were present in 88.1% and 89.3% of the children respectively. Ninety-seven percent of the children who had received 4 doses of diphtheria-pertussis-tetanus vaccine (DPT) and 91% of those who received 3 doses had detectable tetanus toxoid antibodies at the age of 3-4 years. This study shows that serological responses to EPI vaccines given in infancy persist at very satisfactory levels throughout early childhood.     

Interfacial effects of surface-active agents under zinc pressure leach conditions

Liquid sulfur-zinc sulfate solution interfacial tensions and liquid sulfur-zinc sulfate solution-zinc sulfide (marmatite) contact angles were measured in the absence and presence of surface-active agents. Interfacial tensions measured varied between 54 ± 1 mN/m in the surfactant-free system and 20 ± 1 mN/m in the presence of a surfactant. The liquid sulfur-zinc sulfide mineral-zinc sulfate solution contact angle varies between 80 ± 5 deg, in the absence of any surfactant, and 148 ± 5 deg, depending on the surfactant used. The surface-active agents were used as dispersants for sulfur in bench-scale zinc pressure-leaching experiments. The observed extent of zinc extraction depends on the surfactant and varies from 40 to 96 pct.     

Photoelectrocatalytic humic acid degradation kinetics and effect of pH,applied potential and inorganic ions

This study addresses the removal of humic acid (HA) dissolved in an aqueous medium by a photoelectrocatalytic process. UV₂₅₄ removal and the degradation of color (Vis₄₀₀) followed pseudo‐first order kinetics. Rate constants were 1.1 × 10^?1 min^?1, 8.3 × 10^?2 min^?1 and 2.49 × 10^?2 min^?1 (R² > 0.97) for UV₂₅₄ degradation and 1.7 × 10^?1 min^?1, 6.5 × 10^?2 min^?1 and 2.0 × 10^?2 min^?1 for color removal from 5 mg dm^?3, 10 mg dm^?3 and 25 mg dm^?3 HA respectively. Following a 2 h irradiation time, 96% of the color, 98% of the humic acid and 85% of the total organic carbon (TOC) was removed from an initial 25 mg dm^?3 HA solution in the photoanode cell. Photocatalytic removal on the same photoanode was also studied in order to compare the two methods of degradation. Results showed that the photoelectrocatalytic method was much more effective than the photocatalytic method especially at high pH values and with respect to UV₂₅₄ removal. The effect of other important reaction variables, eg pH, external potential and electrolyte concentration, on the photoelectrocatalytic HA degradation was also studied. Copyright © 2003 Society of Chemical Industry     

Product Platform Identification and Development for Mass Customization

This paper is mainly concerned with the Identification of an embryonic product platform from a family of products whose composition, configuration and characteristics are represented by Attributed Graphs. The problem becomes that of identifying the largest isomorphic sub-graph with the highest similarity. An algorithm is proposed for solving this problem together with several novel concepts.     

An Approximate Model of Multistage Automatic Transfer Lines with Possible Scrapping Of Workpieces

We consider multistage automatic transfer lines with unreliable stages, finite interstage buffer storages, and possible scrapping of workpieces. It is assumed that the first stage never idles and the last stage never becomes blocked. Assuming that uptimes and downtimes of a stage are geometrically distributed, an approximate model is developed to compute different performance measures of the transfer line. The results obtained through the approximate model are compared to the exact results for three-stage transfer lines and to simulation results for longer transfer lines. It is observed that the approximate results are good in almost all cases considered.