Influence of doctor blade gap on the properties of tape cast NiO/YSZ anode supports for solid oxide fuel cells

In this study, various tape cast NiO/YSZ anode support layers with similar geometric properties are fabricated by varying the doctor blade from 100?µm to 200?µm with an increment of 25?µm. The mechanical properties of the anode support layers are investigated by three point bending tests of 30 samples for each doctor blade gap. The reliability curves of the flexural strength data are also obtained via two-parameter Weibull distribution method. The effects of the doctor blade gap on the microstructure and the electrochemical performance of the anode support layers are determined via SEM investigations and single cell performance-impedance tests, respectively. The apparent porosities of the samples are also measured by Archimedes’ principle. The results indicate that the doctor blade gap or the resultant tape thickness influences the microstructure of tape cast NiO/YSZ anode supports significantly, yielding different mechanical and electrochemical characteristics. At a reliability level of 70%, the highest flexural strength of 110.20?MPa is obtained from the anode support layer with a doctor blade gap of 175?µm and the 16?cm² active area cell with this anode support layer also exhibits the highest peak performance of 0.483?W/cm² at an operating temperature of 800?°C. Thus, a doctor blade gap of 175?µm is found to have such a microstructure that provides not only better mechanical strength but also higher electrochemical performance.     

Investigation of polymerization parameters affecting dopamine selectivity of a polymeric membrane

Summary By means of electrochemical oxidative polymerization, poly (1,3-phenylenediamine) films on a gold electrode were prepared at a potential of 0.8 V. The permeation properties of polymeric films at the different thickness were investigated by cyclic and differential pulse voltammetry techniques. Voltammetric studies showed that polymeric film at the 1.2 mC thickness exhibited selective permeation for dopamine while rejecting ascorbic acid. Then, all the polymerization parameters affecting the permselective characteristics were systematically investigated and the optimal values were determined. Moreover, stability of polymeric membrane was examined. The results showed that polymeric membrane, owing to permselective character, could be used as a dopamine selective membrane. Received: 10 December 1999/Revised version: 12 March 2000/Accepted: 27 March 2000     

Addressing amorphization and transgranular fracture of B4C through Si doping and TiB2 microparticle reinforcing

Over the last two decades, many studies have contributed to improving our understanding of the brittle failure mechanisms of boron carbide and provided a road map for inhibiting the underlying mechanisms and improving the mechanical response of boron carbide. This paper provides a review of the design and processing approaches utilized to address the amorphization and transgranular fracture of boron carbide, which are mainly based on what we have found through 9 years of work in the field of boron carbides as armor ceramics.     

Importance and applications of DOE/optimization methods in PEM fuel cells: A review

Although proton exchange membrane (PEM) fuel cells are seen as one of the energy conversion technologies of the future due to their high energy conversion efficiency, low levels of emissions, low temperature operation, and compact systems, studies continue to reduce their cost, which is the biggest obstacle to commercialization. Design of experiment (DOE) methods are frequently used in optimization of PEM fuel cells to reduce their cost by decreasing experimental runs. This paper reviews the main gains subsuming the usage of several DOE and optimization methods in PEM fuel cell components, design, operation conditions, and model parameters. It firstly focuses on the Taguchi method and response surface methodology (RSM) known to be applied usually in PEM fuel cell studies. In addition to these known methods, other experimental design and optimization methods used in PEM fuel cells are discussed, and the results are summarized.     

Effects of nutrient and bioactive food components on Alzheimer's disease and epigenetic

Alzheimer's disease (AD) is the most common form of dementia in the elderly and is a chronic neurodegenerative disease that is becoming widespread. For this reason, in recent years factors affecting the development, progression and cognitive function of the AD have been emphasized. Nutrients and other bioactive nutrients are among the factors that are effective in AD. In particular, vitamins A, C and E, vitamins B₁, B₆ and B₁₂, folate, magnesium, choline, inositol, anthocyanins, isoflavones etc. nutrients and bioactive nutrients are known to be effective in the development of AD. Nutrients and nutrient components may also have an epigenetic effect on AD. At the same time, nutrients and bioactive food components slow down the progression of the disease. For this reason, the effect of nutrients and food components on AD was examined in this review.     

New insights into ice growth and melting modifications by antifreeze proteins

Antifreeze proteins (AFPs) evolved in many organisms, allowing them to survive in cold climates by controlling ice crystal growth. The specific interactions of AFPs with ice determine their potential applications in agriculture, food preservation and medicine. AFPs control the shapes of ice crystals in a manner characteristic of the particular AFP type. Moderately active AFPs cause the formation of elongated bipyramidal crystals, often with seemingly defined facets, while hyperactive AFPs produce more varied crystal shapes. These different morphologies are generally considered to be growth shapes. In a series of bright light and fluorescent microscopy observations of ice crystals in solutions containing different AFPs, we show that crystal shaping also occurs during melting. In particular, the characteristic ice shapes observed in solutions of most hyperactive AFPs are formed during melting. We relate these findings to the affinities of the hyperactive AFPs for the basal plane of ice. Our results demonstrate the relation between basal plane affinity and hyperactivity and show a clear difference in the ice-shaping mechanisms of most moderate and hyperactive AFPs. This study provides key aspects associated with the identification of hyperactive AFPs.     

Nonintrusive Method for Detecting Particle Movement Characteristics near Threshold Flow Conditions

Bed-load measurements comprise an important component in the development of reliable formulas, in an effort to obtain the necessary constitutive relations between the amount of transported material and flow parameters. The uncertainty of such measurements is rather well known, being much more pronounced at lower transport rates. This uncertainty stems from the multitude of factors affecting bed-load transport and the lack of available trustworthy measuring technologies. Predictions of the limiting case of nearly zero bed-load transport, typically reported in literature as threshold of motion or critical condition, are even more challenging. The purpose of this contribution is twofold. First, to examine the sensitivity of bed-load transport measurements at conditions moderately higher than critical, to the presence of a rather unobtrusive trap, designed through several iterations. Even under relatively simple laboratory flume channel and flow conditions, it proved difficult to measure the bed-load transport rate in a completely unbiased way. Second, to develop a methodology, together with the appropriate instrumentation, for determining the condition of incipient motion. The nonintrusive approach described here proved to be reliable in detecting even the slightest movements of a particle. At the same time, it demonstrates the complexity of the problem due to the highly fluctuating nature of turbulent flow.     

A parametric study on isobaric adsorption process in a closed adsorbent bed

A numerical study on heat and mass transfer in an annular adsorbent bed filled with adsorbent granules for an isobaric adsorption process is performed. In order to reduce the number of independent parameters that influences heat and mass transfer in the bed, the governing equations and related initial and boundary conditions for the problem are non-dimensionalized and this yields two dimensionless parameters as G and Γ. The G dimensionless parameter is the ratio of heat of adsorption to sensible heat stored by adsorbent particle and Γ parameter compares mass diffusion within the adsorbent particle and heat diffusion in the radial direction of the adsorbent bed. The obtained results show that the total dimensionless time for an adsorption process can be reduced by increasing of Γ value. The total dimensionless time is independent from G for low values of Γ (i.e. Γ = 10^− 5). The results also show that the instantaneous equilibrium model can provide accurate results only for an adsorbent bed with a low value of Γ (i.e. Γ = 10^− 5). The present study is performed for Γ values from 10^− 5 to 1 and G value from 1 to 100.