Internal structure of bitumen/polymer/wax ternary mixtures for warm mix asphalts

Polymer modified asphalts (PMA) and warm mix asphalts (WMA) are technologies widely adopted in the paving industry. The first one is well established, while the second one is relatively new, but rapidly growing since it guarantees economic and environmental advantages. Until now PMA and WMA have been used disjointedly, but it would be useful to combine them to keep the advantages of both. One of the adopted solutions to obtain a warm effect is the addition of waxes to the asphaltic binder. Therefore, a “warm mix polymer modified asphalt” may be potentially obtained with a ternary asphalt/polymer/wax system. However, the final warm effect and performances of the binder will depend on the interactions between the three components. A preliminary investigation was done by mixing asphalt, styrene‐butadiene‐styrene block copolymer and a wax chosen among the following three categories: paraffinic, partially oxidized and maleic anhydride functionalized. The morphological and calorimetric analyses and solubility tests allowed identifying different behaviors depending on the wax type, which may preferentially interact either with the asphalt or with the polymer, thus influencing the whole binder structure. With regard to the ternary mixes, it was found that: (i) the paraffinic wax preferentially resides in the polymer‐rich phase, and slightly enhances the asphalt‐polymer compatibility; (ii) the partially oxidized wax prefers the asphaltene‐rich phase and reduces the compatibility; (iii) it is not clear where the functionalized wax is located, but it has a considerable compatibilizing effect and strongly alters the colloidal equilibrium of the asphalt‐polymer blend. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Mobile and Personal Communications in the 60 GHz Band: A Survey

This paper intends to present a summary of the technical issues arising in the exploitation of the 60 GHz mm-wave band for mobile and personal communications. The most significant applications proposed so far are surveyed, with particular emphasis placed on recent experimentation about millimeter-wave propagation for road/railway transportation as well as indoor scenarios. As a case study, the capacity of a (micro-)cellular Code Division Multiple Access (CDMA) network in the 60-GHz band is also evaluated in detail.     

Heart rate responses to social interactions in free-moving rhesus macaques (Macaca mulatta): A pilot study.

Heart rate telemetry was explored as a means to access animal emotion during social interactions under naturalistic conditions. Heart rates of 2 middle-ranking adult females living in a large group of rhesus macaques (Macaca mulatta) were recorded along with their behavior. Heart rate changes during 2 types of interactions were investigated, while controlling for the effects of posture and activity. The risk of aggression associated with the approach of a dominant individual was expected to provoke anxiety in the approachee. This prediction was supported by the heart rate increase after such an approach. No increase was found when the approacher was a kin or a subordinate individual. The tension-reduction function of allogrooming was also supported. Heart rate decelerated faster during the receipt of grooming than in matched control periods. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis

Preparation of nano-size ZrB₂ powder by SHS has been investigated. Zr and B elemental powders were mixed with 10–50 wt.% NaCl, and prepared pellets were reacted under argon. Adiabatic temperatures were calculated by HSC software. Increasing NaCl content led to a continuous decrease in adiabatic temperatures and reaction wave velocity. Products were subjected to XRD, SEM and FESEM analyses. Average crystallite size of ZrB₂, which was 303 nm without NaCl, decreased to 32 nm with 40% NaCl addition. Distinct decrease in ZrB₂ particle size was also observed from SEM analyses. 30% NaCl addition was found to be optimum for ensuring a stable SHS reaction and providing the formation of nano-size ZrB₂ particles. It was revealed from particle size distribution measurements that ZrB₂ powder obtained by 30 wt.% NaCl addition contained particles mostly finer than 200 nm. A mechanism, similar to solution-precipitation was proposed for the particle size refining effect of NaCl.     

Three-dimensional linear elastic distributions of stress and strain energy density ahead of V-shaped notches in plates of arbitrary thickness

This paper presents an analytical solution, substantiated by extensive finite element calculations, for the stress field at a notch root in a plate of arbitrary thickness. The present approach builds on two recently developed analysis methods for the in-plane stresses at notch root under plane-stress or plane strain conditions, and the out-of-plane stresses at a three-dimensional notch root. The former solution (Filippi et al., 2002) considered the plane problem and gave the in-plane stress distributions in the vicinity of a V-shaped notch with a circular tip. The latter solution by Kotousov and Wang (2002a), which extended the generalized plane-strain theory by Kane and Mindlin to notches, provided an expression for the out-of-plane constraint factor based on some modified Bessel functions. By combining these two solutions, both valid under linear elastic conditions, closed form expressions are obtained for stresses and strain energy density in the neighborhood of the V-notch tip. To demonstrate the accuracy of the newly developed solutions, a significant number of fully three-dimensional finite element analyses have been performed to determine the influences of plate thickness, notch tip radius, and opening angle on the variability of stress distributions, out-of-plane stress constraint factor and strain energy density. The results of the comprehensive finite element calculations confirmed that the in-plane stress concentration factor has only a very weak variability with plate thickness, and that the present analytical solutions provide very satisfactory correlation for the out-of-plane stress concentration factor and the strain constraint factor.     

Die Chlorverluste beim Veraschen von kochsalzhaltigen Nahrungsmitteln, eine Reaktion zwischen Chlornatrium und Kohlenstoff

Ohne Zusammenfassung     

A model combining structure and properties of a 160/220 bituminous binder modified with polymer/clay nanocomposites. A rheological and morphological study

The present contribution focuses on the modification of a 160/220 bituminous binder with clay and polymer/clay nanocomposites. Bitumen/polymer/clay ternary blends were prepared using styrene–butadiene–styrene, ethylene vinyl acetate and ethylene methylacrylate copolymers mixed with an organomodified montmorillonite. Dynamic mechanical analyses were performed in the extended domain of stress, temperature and frequency to analyse the thermorheological behaviour of the blends. The time–temperature superposition principle was applied to shift the experimental data recorded at different temperatures and generate master curves of the linear viscoelastic functions. For all blends, the mechanical response of the system was found to be strongly and intimately influenced by the nanocomposite modification. In some cases, a solid-like behaviour appears and delays the Newtonian transition. Morphological analyses performed with fluorescence microscopy allowed to associate the binder properties with the presence of clay silicates, which alter the colloidal equilibrium of the bitumen and enhances the compatibility between bitumen and polymers. Based on the morphological and rheological results, a structural model of the prepared blends is proposed.     

Effect of hemodiafiltration with endogenous reinfusion on overt idiopathic chronic inflammation in maintenance hemodialysis patients: A multicenter longitudinal study

Chronic inflammation is widely diffuse in maintenance hemodialysis (MHD) patients and is associated with poor survival. Hemodiafiltration with endogenous reinfusion (HFR) is a dialysis technique, highly biocompatible, able to adsorb proinflammatory cytokines and to decrease amino acids and antioxidants loss. These features could be helpful in MHD patients affected by idiopathic chronic inflammation, but this issue remains to be elucidated. We performed a multicenter longitudinal study to assess the effect of the switching from bicarbonate HD to HFR in patients with serum C‐reactive Protein (CRP) > 5 mg/L coupled with albumin <4.0 g/dL in the last 6 months. We enrolled 24/176 (14%) patients, of which 20 patients were assessed at 4 months and 18 completed the study. We excluded 11 patients with evident causes of inflammation. At baseline, serum levels of CRP (18.7[7.0–39.4] mg/L) and albumin (3.5[3.3–3.7] g/dL) were significantly correlated (r = ?0.49; P = 0.028). The effect on CRP and albumin was almost evident in the first 4 months and remained stable until to eighth month. A strict correlation (R = ?0.49; 0.040) between percentage change of CRP (?35%) and albumin (+14%) after 8 months of HFR. These effects were associated with the reduction of IL‐6, IL‐1β, and TNF‐α and the increment of pre‐albumin and leptin, whereas the serum levels of Branched Chain Amino Acid (BCAA) remained unchanged. In MHD patients affected by idiopathic chronic inflammation the switching from BHD to HFR is associated with improvement of inflammation. Whether these favorable effects may modify the outcomes of these high‐risk patients needs to be confirmed by studies ad hoc.     

Charge transfer and partial pinning at the contacts as the origin of a double dip in the transfer characteristics of graphene-based field-effect transistors

We discuss the origin of an additional dip other than the charge neutrality point observed in the transfer characteristics of graphene-based field-effect transistors with a Si/SiO2 substrate used as the back-gate. The double dip is proved to arise from charge transfer between the graphene and the metal electrodes, while charge storage at the graphene/SiO2 interface can make it more evident. Considering a different Fermi energy from the neutrality point along the channel and partial charge pinning at the contacts, we propose a model which explains all the features observed in the gate voltage loops. We finally show that the double dip enhanced hysteresis in the transfer characteristics can be exploited to realize graphene-based memory devices.