Thermal conductivity estimation of the organic and inorganic refrigerants in the saturated liquid state

The use of a general correlation, proposed for organic liquid thermal conductivity λ prediction and checked in the case of organic refrigerant fluids, is extended to inorganic refrigerant fluids whose λ decreases when the reduced temperature, T_r, increases. Suggestions are given for the refrigerants fluids whose λ increases with the reduced temperature.     

Interferential lithography of 1D thin metallic sinusoidal gratings: Accurate control of the profile for azimuthal angular dependent plasmonic effects and applications

Nonlinear processes involved in the manufacture of nominally sinusoidal surface relief diffraction gratings generated by interference lithography can introduce distortions into the profile of these surfaces. Such distortions may dramatically affect both the specular reflectivity and diffracted efficiencies from such a surface [H. Raether, Phys. Thin Film 9 (1977) 145–261]. We shall consider in particular the case of metallic gratings used to investigate plasmonic effects that can be engineered for bio-sensing applications. To investigate these effects, interference lithography (IL) has been used for the generation of profile controlled sinusoidal plasmonic crystals. IL exposure contrast study has been performed to control the amplitude oscillation and the surface roughness quality. Bi-metallic layer of silver and gold have been systematically deposited with different film thicknesses. A comprehensive numerical model that studies the optical coupling to surface plasmon polaritons on Ag/Au gratings has been undertaken for the simulation of the reflectivity and azimuthal angle dependence [Z. Chen, I.R. Hooper, J.R. Sambles, J. Opt. A: Pure Appl. Opt. 10 (1) (2008) 015007]. This computation illustrates the sensitivity of individual features to specific harmonic components of the surface, for surface plasmon resonances recorded in both the zeroth and higher diffracted orders. The roughness surface control after development and after bi-metallic evaporation strongly contributes to tighten the width of the reflectivity peak. Optimization process has shown that for an Ag (37 nm) and Au (7 nm) metallic bilayer, a semi-amplitude of 20 nm provides the best reflectivity.     

Effects of polymer modification on the fuel resistance of asphalt binders

Fuel resistance is an important characteristic of asphalt binders, especially when used in airport fields and filling stations. However, the relevant standards are presently lacking and the scientific literature on the development of suited formulations is sparse. In this paper, a simple procedure to assess the fuel resistance of asphalts (considered in a dynamic sense) is proposed. A number of polymer modified asphalts (PMAs), prepared from two bases and 4 or 6 wt% of several polymers, have been analyzed with this procedure and the relationships between fuel resistance and morphology of the PMAs, the chemical structure of the polymers and the composition of the asphalt bases have been investigated.     

Adiponectin and Leptin Exert Antagonizing Effects on HUVEC Tube Formation and Migration Modulating the Expression of CXCL1, VEGF,MMP-2 and MMP-9

Adiponectin and leptin are two abundant adipokines with different properties but both described such as potent factors regulating angiogenesis. AdipoRon is a small-molecule that, binding to AdipoRs receptors, acts as an adiponectin agonist. Here, we investigated the effects of AdipoRon and leptin on viability, migration and tube formation on a human in vitro model, the human umbilical vein endothelial cells (HUVEC) focusing on the expression of the main endothelial angiogenic factors: hypoxia-inducible factor 1-alpha (HIF-1α), C-X-C motif chemokine ligand 1 (CXCL1), vascular endothelial growth factor A (VEGF-A), matrix metallopeptidase 2 (MMP-2) and matrix metallopeptidase 9 (MMP-9). Treatments with VEGF-A were used as positive control. Our data revealed that, at 24 h treatment, proliferation of HUVEC endothelial cells was not influenced by AdipoRon or leptin administration; after 48 h longer exposure time, the viability was negatively influenced by AdipoRon while leptin treatment and the combination of AdipoRon+leptin produced no effects. In addition, AdipoRon induced a significant increase in complete tubular structures together with induction of cell migration while, on the contrary, leptin did not induce tube formation and inhibited cell migration; interestingly, the co-treatment with both AdipoRon and leptin determined a significant decrease of the tubular structures and cell migration indicating that leptin antagonizes AdipoRon effects. Finally, we found that the effects induced by AdipoRon administration are accompanied by an increase in the expression of CXCL1, VEGF-A, MMP-2 and MMP-9. In conclusion, our data sustain the active role of adiponectin and leptin in linking adipose tissue with the vascular endothelium encouraging the further deepening of the role of adipokines in new vessel’s formation, to candidate them as therapeutic targets.     

Study of the influence of notch radii and temperature on the probability of failure: A methodology to perform a combined assessment

The fracture assessment of notched components based on cracked components approaches leads to over‐conservative failure predictions. In the research literature, several approaches are proposed to overcome this problem using an apparent fracture toughness, . Nevertheless, most of these approaches are based on deterministic assumptions despite the large and variable scatter exhibited by for different notch radii (ρ) or temperatures (T). This paper proposes a methodology for deriving a probabilistic field including the effect of temperature on the failure of notched components. First, the theory of critical distances is applied to transform each apparent fracture toughness into the equivalent fracture toughness for ρ = 0. Then, the temperature is supposed to act as a scale effect in the Weibull cumulative distribution function of the equivalent fracture toughness, and the corresponding scale effect function is derived. Finally, the applicability of the proposed methodology is illustrated by an example using two ferritic‐pearlitic steels: S275JR and S355J2.     

A new maximum likelihood polarimetric interferometric synthetic aperture radar coherence change detection (ML-PolInSAR-CCD)

Coherent change detection (CCD) use the sample degree of coherence as a measure of the temporal change collected between two complex-valued SAR images observed in the same area and using also the same geometry and polarization. The problem of classical CCD approaches shows a temporal change only when there are in areas of the image that have high clutter-to-noise power ratio. All experiments regarding the maximum-likelihood (ML) CCD, found to estimate useful information also in lower clutter-to-noise power ratio. Experiments used only electromagnetic transmissions in the same polarization. This work extends the formulation of the probability distribution function of the CCD in a multi-dimensional version useful for multi-polarization SAR data. Results of this ML-polarimetric interferometric SAR-CCD (ML-PolInSAR-CCD) show surprising recovery of both amplitude and phase CCD information. This information recovery is useful for improved interferometric SAR (InSAR), permanent scatterers interferometry (PS-InSAR) and SAR tomography applications.     

Experimental multiaxial fatigue tests realized with newly developed geometry specimens

In the literature there are many experimental results of multiaxial fatigue testing, usually generated by the combination of two or more cyclical loads. The cases in which samples are randomly stressed are rarer. Moreover, to generate particular stress states, the use of specific machinery for fatigue tests is usually required. For these reasons, the authors have created a particular geometry of specimens, which, when solicited by a single input of a random type, guarantees the creation of specific multiaxial stress states without using complex and costly instruments. The experimental tests were finally used for the validation of the multiaxial reduction method developed and currently utilized in the authors' design phase, though potentially used to verify all the other methodologies present in the literature.     

Nonlinear fatigue crack propagation in a baffle module of Wendelstein 7‐X under cyclic bending loads

Simulation of the fatigue crack propagation in a Wendelstein 7‐X baffle module is performed in this study using both a finite element method‐based software and the UniGrow nonlinear model for small‐scale yielding (SSY) conditions. Some experimental fatigue tests of several cracked baffle modules have been performed through a servo‐hydraulic machine. One of these experimental tests has been considered to simulate fatigue crack propagation in the baffle module. Before starting the experimental test, a first crack partly contained in the welding seam and partly in the steel pipe is found. Subsequently, owing to the applied load, the crack propagated both into the welding seam and into the steel pipe until the plastic zone in the near field attains SSY conditions. Finally, owing to the increase in the extension of the plastic zone, SSY conditions are not more valid, and the breakage of the steel pipe is produced by plastic collapse.     

Creep damage behaviors of red sandstone subjected to uniaxial compression after high-temperature heat treatment using acoustic emission technology

This work discusses the results from tests conducted to investigate the uniaxial compression and creep behavior of red sandstone. An original untreated sample and an 800°C treated sample were selected to carry out the experiments. High temperature had an obvious influence on the mechanical properties of the red sandstone. The relationship between creep strain and instantaneous strain, as well as the instantaneous deformation modulus and creep viscosity coefficient, was analyzed. High temperature reduced the ability of the red sandstone to resist instantaneous deformation and creep deformation. Acoustic emission (AE) technology was also used in the loading process of uniaxial compression and creep tests, providing a powerful means for damage evolutionary analysis of the red sandstone.