Stable 80-GHz short pulse generation using the cascaded polarization-maintaining fiber loop mirrors

In this work, an optical short pulse generator is designed consisting of a pulse compressor and cascaded notch filter type repetition rate doublers. The performance characteristics such as pulsewidth and peak power as a function of design parameters are studied. The pulse compressor is optimized based on the simulation results. The 6-ps-wide pulses at 20-GHz repetition rate directly generated from mode-locked fiber laser are compressed to 1.25-ps-wide pulses. Using a set of polarization-maintaining fiber loop mirrors, the repetition rate is quadrupled and stable 1.45-ps-wide pulses at 80 GHz are achieved.     

ε‐Branched Flexible Side Chain Substituted Diketopyrrolopyrrole‐Containing Polymers Designed for High Hole and Electron Mobilities

Based on the integrated consideration and engineering of both conjugated backbones and flexible side chains, solution‐processable polymeric semiconductors consisting of a diketopyrrolopyrrole (DPP) backbone and a finely modulated branching side chain (ε‐branched chain) are reported. The subtle change in the branching point from the backbone alters the π?π stacking and the lamellar distances between polymer backbones, which has a significant influence on the charge‐transport properties and in turn the performances of field‐effect transistors (FETs). In addition to their excellent electron mobilities (up to 2.25 cm² V^?1 s^?1), ultra‐high hole mobilities (up to 12.25 cm² V^?1 s^?1) with an on/off ratio (I_on/I_off) of at least 10⁶ are achieved in the FETs fabricated using the polymers. The developed polymers exhibit extraordinarily high electrical performance with both hole and electron mobilities superior to that of unipolar amorphous silicon.     

ZnO nanostructure thin films by continuous spray pyrolysis using doped precursor for Si solar cell application

This work presents deposition of Zn solution seed layer assisted growth of zinc oxide (ZnO) nanostructure layers by continuous spray pyrolysis reactor using lanthanides (Er and Eu) and metal (Al) influenced zinc acetate precursor solution. Dopants in precursors have influenced structural property, surface morphology and optical reflectance of resulting ZnO thin films which are supported by X-ray diffractometer, scanning electron microscope and reflectance measurements. Enhanced dispersion amongst nanorods is observed under the influence of Er and Al dopant in ZnO thin film. The change of precursor from Zinc acetate to Titanium tetraisopropoxide for Er doped precursor is helping to achieve better crystalline ZnO nanorods arrangement with increased homogenous growth, which results into improved light reflectance reduction of thin film. The experimental evidences of light reflectance from ZnO nanorods on Si surface is studied with the help of FDTD based Lumerical software package which can be a useful study for designing ZnO nanorods thin film in device purposes. The utility of ZnO layer by this reactor on low efficiency Si solar cell is also explored in improving device efficiency via increase of photocurrent.     

Role of work hardening characteristics of matrix alloys in the strengthening of metal matrix composites

The strengthening of particulate reinforced metal-matrix composites is associated with a high dislocation density in the matrix due to the difference in coefficient of thermal expansion between the reinforcement and the matrix. While this is valid, the role of work hardening characteristics of the matrix alloys in strengthening of these composites is addressed in the present paper. It is found that commercial purity aluminium which has the lowest work hardening rate exhibits the highest strength increment. This effect is due to increased prismatic punching of dislocations. This relationship of decreasing work hardening rate associated with increasing prismatic punching of dislocations in the order 7075, 2014, 7010, 2024, 6061 and commercial purity aluminium leading to increased strength increments is noted.     

Surface topography and hydrogen sensor response of APCVD grown multilayer graphene thin films

Atmospheric pressure chemical vapour deposition was employed to deposit graphene thin films on thermally oxidized p-silicon substrates. Raman spectroscopy and energy dispersive spectroscopy revealed the multilayer nature and the composition of the grown graphene films respectively. The defective nature and the defect density of the graphene films were determined from the Raman experiments. Field effect scanning electron microscopy, transmission electron microscopy and atomic force microscopy were used to study the surface morphology of the multilayer graphene films. The film topography was sensitive to temperature and time of growth. A suitable growth mechanism has been proposed to explain the topographical observations. The large surface area of the multilayer films was found to be suitable for hydrogen sensor applications and the sensing results were correlated with the morphology of the grown films.     

Sensitivity of third- and higher-order filters

For any realization of a network function F(s) = N(s)/D(s), the sensitivities that can be most readily calculated are those of the coefficients in N(s) and D(s). A simple relationship is derived that enables one to calculate the root (pole and zero) sensitivities of F(s) in terms of the coefficient sensitivities. The root sensitivities, in turn, enable one to calculate the root pair Q and root frequency sensitivities, which can be used to characterize and compare different realizations of F(s). Application to 3rd- and 4th-order filters reveals formulations that are more elegant than those already known in the literature.     

Template-free synthesis of flower-shaped zero-valent iron nanoparticle: Role of hydroxyl group in controlling morphology and nitrate reduction

Well-dispersed single phasic flower-like zero valent iron nanoparticles have been synthesized under aerobic conditions using a facile approach without the addition of any additives or templates. The role of hydroxyl groups of polyhydroxy alcohols in controlling surface morphology of nanoparticles has been thoroughly investigated. The obtained nanoparticles have been characterized by TEM, FE-SEM, XRD and BET surface area analyzer. Electron microscopy analyses reveal that the solvent plays a pivotal role in determining the morphology of the particles. With increase in viscosity of the solvent, formations of ‘petal-like’ structures, which are joined at the center are formed. The nitrate removal efficiency of the iron nanoparticles synthesized in different solvents has been studied and it is seen that the “flower-like” iron nanoparticles were most active in the removal of nitrate. Experiments have been done by varying (i) nitrate concentrations, (ii) nanoparticle dose, and (iii) type of nanoparticles. The results conclude that highest removal efficiency (～100%) was achieved when the nanoparticle dose was 2.88 g/L, even for high nitrate concentrations up to 400 mg/L. The major highlight of this work is the fact that even though the nanoparticles synthesized in glycerol-water mixture have larger size in comparison to the other nanoparticles, still they remove the nitrates with highest efficiency.”     

Isolation and identification of phosphate‐solubilizing microorganisms and distribution of orthophosphate in different seasons from sewage‐fed East Kolkata Wetland

This study focused on isolation and identification of possible phosphate‐solubilizing bacteria (PSB ) from the sewage‐fed East Kolkata Wetland (EKWL ), a prospective water resource for pisciculture. In addition, different limnological parameters have been correlated with orthophosphate and seasonal variations. PSB have been isolated in Pikovskaya medium and identified morphologically and biochemically and finally analysed by 16S rDNA gene sequence. Limnological studies involving temperature (potentiometric), pH (potentiometric), dissolved oxygen (iodometric), ammonia‐nitrogen (spectrophotometric) and orthophosphate (spectrophotometric) concentrations were conducted. The results of this study established the presence of Bacillus megaterium , a potential PSB in EKWL . The activity of B. megaterium is also supported by the seasonal orthophosphate variations. The changes in concentration of other limnological parameters were also prominent. The water quality parameters of temperature (r  = 0.886), dissolved oxygen (r  = 0.729) and ammonia‐nitrogen (r  = 0.396) concentrations exhibited a positive correlation with orthophosphate and a negative correlation with pH (r  = ?0.699). The B. megaterium obtained in this study, exhibited a significant alteration in regard to orthophosphate content and relationships with other factors. Further experiment on the soluble phosphorus solubilization potential of B. megaterium revealed the biological availability of phosphorus was increased by threefold after 120 hr of incubation, with the decreasing pH value, although the phytase activity was 0.419 U/ml. PSB have a vital function in plant nutrition in supplying phosphate, essential nutrients and its uptake results in appropriate functioning and metabolism of different aquatic plants and organisms. PSB are competent biofertilizer to amplify aquaculture production for sustainable development.     

Epitaxial nucleation model for chiral-selective growth of single-walled carbon nanotubes on bimetallic catalyst surfaces

An epitaxial nucleation model for single-walled carbon nanotube (SWCNT) growth on bimetallic catalysts surfaces is reported in support of experimental observations of chiral enrichment. We model the bimetallic catalyst surfaces as a 2D (1 1 1) surface consisting of Ni or a combination of Ni and Fe atoms, with varying average bond length between nearest neighbor atoms which corresponds to the crystal structure of the alloys. The energies associated with nanotube cap formation on these various surfaces are calculated using density functional theory (DFT). We find that certain cap chiralities, such as (8, 4), are more stably bound to a surface that resembles a Ni_0.27Fe_0.73 bimetallic catalyst, whereas other chiralities, such as (9, 4), are more stable on a pure Ni surface. These results help explain the predominance of certain chiralities on specific bimetallic catalysts and provide a potential route to controlling the chirality of as-grown SWCNTs.     

Progressive cutting tool wear detection from machined surface images using Voronoi tessellation method

Tool condition monitoring by machine vision approach has been gaining popularity day by day since it is a low cost and flexible method. In this paper, a tool condition monitoring technique by analysing turned surface images has been presented. The aim of this work is to apply an image texture analysis technique on turned surface images for quantitative assessment of cutting tool flank wear, progressively. A novel method by the concept of Voronoi tessellation has been applied in this study to analyse the surface texture of machined surface after the creation of Voronoi diagram. Two texture features, namely, number of polygons with zero cross moment and total void area of Voronoi diagram of machined surface images have been extracted. A correlation study between measured flank wear and extracted texture features has been done for depicting the tool flank wear. It has been found that number of polygons with zero cross moment has better linear relationship with tool flank wear than that of total void area.