A comparable study of image approximations to the reaction field

The recently developed high-order accurate multiple image approximation to the reaction field for a charge inside a dielectric sphere [J. Comput. Phys. 223 (2007) 846-864] is compared favorably to other commonly employed reaction field schemes. These methods are of particular interest because they are useful in the study of biological macromolecules by the Monte Carlo and Molecular Dynamics methods.     

Numerical study of steady turbulent flow through bifurcated nozzles in continuous casting

Bifurcated nozzles are used in continuous casting of molten steel, where they influence the quality of the cast steel slabs. The present study performs two-dimensional (2-D) and three-dimensional (3-D) simulations of steady turbulent(K- ε) flow in bifurcated nozzles, using a finite-element (FIDAP) model, which has been verified previously with water model experiments. The effects of nozzle design and casting process operating variables on the jet characteristics exiting the nozzle are investigated. The nozzle design parameters studied include the shape, angle, height, width, and thickness of the ports and the bottom geometry. The process operating practices include inlet velocity profile and angle as well as port curvature caused by erosion or inclusion buildup. Results show that the jet angle is controlled mainly by the port angle but is steeper with larger port area and thinner walls. The degree of swirl is increased by larger or rounder ports. The effective port area, where there is no recirculation, is increased by smaller or curved ports. Flow asymmetry is more severe with skewed or angled inlet conditions or unequal port sizes. Turbulence levels in the jet are higher with higher casting speed and smaller ports. Formerly Research Assistant, Department of Mechanical and Industrial Engineering. Formerly Research Assistant in the same department.     

High-Performance Multilayer Capacitor Dielectrics from Chemically Prepared Powders

Advantages of chemically prepared powders for electronic ceramics have been demonstrated for a number of multilayer capacitor (MLC) dielectrics. A cost-efficient precipitation process was developed to produce undoped or doped crystalline barium titanate powder with a narrow particle size distribution close to 0.5 μm. More complex compositions, e.g., barium-neodymium titanate, were amorphous as precipitated but could be crystallized by calcination below 1000°C. Additional compositional modifications, to adjust electrical properties or to lower sintering temperature, were accomplished by doping the surface of the powder particles using a solution coating process. Exceptional fired densities and electrical performance were obtained.     

Increasing testing productivity and software quality: A comparison of software testing methodologies within NASA

Pressure to compress the development life cycle and reduce the duration and resources committed to testing lead to experimentation in testing at the NASA Goddard Space Flight Centerís Software Engineering Laboratory. This study investigates the trend to reduce developer testing and increasingly rely upon inspection techniques and independent functional testing to shorten the development life cycle, improve testing productivity, and improve software quality.An approach is developed to conduct this comparison. In particular, the problem faced by software researchers, having a comprehensive characterization of software projects so similar types may be identified for comparative studies, is addressed using expert opinion.     

The preparation and properties of some lithium zinc silicate glass-ceramics

Lithium zinc silicate glasses are of interest for the preparation of moderately high thermal expansion glass-ceramics which are suitable for sealing to a number of nickel-based superalloys. The effect of composition, in particular the variation of nucleating species, on the crystallization behaviour of a number of these glasses has been examined using differential thermal analysis, X-ray diffraction, and electron microscopy. Various crystal phases have been identified, including cristobalite, quartz, tridymite and ₀ Li₂ZnSiO₄. In addition, most of the glass-ceramics also contain an unidentified phase which may be related to the-series of lithium zinc silicates. Heat-treatment schedules have been derived on the basis of these results in order to produce a number of glass-ceramic materials. The resultant thermal expansion characteristics of the glass-ceramics have been monitored using dilatometry, and expansions in the range 12.3 to 17.1×10^–6° C^–1 (20 to 460° C), have been obtained, depending on the precise glass composition and heat-treatment schedule employed. In addition, the mechanical properties of a number of selected samples have been monitored, employing a biaxial flexure technique.     

Complexities in STEM analyses of polymer blend thin films

Polystyrene (PS)-polyether sulphone (PES) polymer blend thin films were prepared for examination in a scanning transmission electron microscope. The microstructures observed in 75 wt % PS-25 wt % PES films consisted of spherical inclusions, ranging from 0.2 to 1.2m in diameter. X-ray spectrometric analysis in the microscope revealed that the inclusions were PES-rich, while the matrix contained only PS. Attention in this paper is paid to the contrast in the annular dark-field detector (ADF) images from these thin films. This image contrast has a complicated dependence on both the angular range subtended by the dark-field detector and mass-thickness variations within the films. On microscopes with appropriate lens controls which permit the acceptance angle of the ADF detector to be varied, it becomes possible actually to reverse the contrast between the two phases.     

On finding optimal and near-optimal lineal spanning trees

The search for good lineal, or depth-first, spanning trees is an important aspect in the implementation of a wide assortment of graph algorithms. We consider the complexity of findingoptimal lineal spanning trees under various notions of optimality. In particular, we show that several natural problems, such as constructing a shortest or a tallest lineal tree, are NP-hard. We also address the issue of polynomial-time, near-optimization strategies for these difficult problems, showing that efficient absolute approximation algorithms cannot exist unlessP = NP.     

Citations do not solve problems.

D. T. Cambell and D. W. Fiske (1959) made the now-obvious statement that measures of the same variable made by different methods should agree (converge) and certainly should agree better than measures of different variables made by those several methods. Almost everyone accepted that statement, yet the multitrait–multimethod matrices published today show little or no improvement over the published examples cited in 1959. The article raised the conceptual problem of how a variable and its measurement should be linked and the methodological problem of clarifying the nature of methods and their effects. Given these unresolved problems, it is perhaps not surprising that the question of the appropriate statistical analysis of these matrices has also no consensual answer. Perhaps methods and traits or contents are so thoroughly intertwined that their interaction cannot be adequately analyzed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An Engineered sgsh Mutant Zebrafish Recapitulates Molecular and Behavioural Pathobiology of Sanfilippo Syndrome A/MPS IIIA

Mucopolysaccharidosis IIIA (MPS IIIA, Sanfilippo syndrome type A), a paediatric neurological lysosomal storage disease, is caused by impaired function of the enzyme N-sulfoglucosamine sulfohydrolase (SGSH) resulting in impaired catabolism of heparan sulfate glycosaminoglycan (HS GAG) and its accumulation in tissues. MPS IIIA represents a significant proportion of childhood dementias. This condition generally leads to patient death in the teenage years, yet no effective therapy exists for MPS IIIA and a complete understanding of the mechanisms of MPS IIIA pathogenesis is lacking. Here, we employ targeted CRISPR/Cas9 mutagenesis to generate a model of MPS IIIA in the zebrafish, a model organism with strong genetic tractability and amenity for high-throughput screening. The sgsh^Δex5−6 zebrafish mutant exhibits a complete absence of Sgsh enzymatic activity, leading to progressive accumulation of HS degradation products with age. sgsh^Δex5−6 zebrafish faithfully recapitulate diverse CNS-specific features of MPS IIIA, including neuronal lysosomal overabundance, complex behavioural phenotypes, and profound, lifelong neuroinflammation. We further demonstrate that neuroinflammation in sgsh^Δex5−6 zebrafish is largely dependent on interleukin-1β and can be attenuated via the pharmacological inhibition of Caspase-1, which partially rescues behavioural abnormalities in sgsh^Δex5−6 mutant larvae in a context-dependent manner. We expect the sgsh^Δex5−6 zebrafish mutant to be a valuable resource in gaining a better understanding of MPS IIIA pathobiology towards the development of timely and effective therapeutic interventions.     

A Digital Recording System for Body Temperature Telemetry from Small Animals

A relatively simple instrumentation system is described which samples and records the body temperatures from up to twelve experimental animals over long periods of time. Body temperatures are sensed by temperature-sensitive FM transmitters implanted in the peritoneal cavities. The emitted signals are received by antennas, amplified, and sequentially gated into a frequency counter for counting; the resulting digital numbers are recorded in binarycoded decimal (BCD) format on punched paper tape. Samples can be spaced at intervals of from 1 to 60 minutes, and sampling can be continued over long periods of many months. This system eliminates the need for analog-to-digital conversion and allows rapid and direct transmission of the raw data to the digital computer for processing and analysis.