Recovery of deuterium from hydrogen–deuterium mixture using palladium

The applicability of palladium for the separation of hydrogen isotopes (hydrogen and deuterium) is evaluated systematically by generating isotherm data and conducting column experiments in a laboratory set-up. Effect of various parameters such as concentration of the isotopic mixture, particle size, eluent flow rate, etc. is studied experimentally. A fixed-bed chromatographic model is developed and validated using the experimental data. The model is further used to predict the performance of a multi-column configuration for large-scale separation. Chromatographic separation is thus found to be a promising technique to achieve the required purity and hence it may be clubbed with the existing systems (e.g. cryogenic distillation) to obtain enhanced performance.     

Application of image processing and radial basis neural network techniques for ore sorting and ore classification

Ore sorting is a useful tool to remove gangue material from the ore of bigger size ranges. The radical development in the area of artificial intelligence allows speedy processing the full color digital images for the preferred investigations. In this paper a novel approach to classify the ores for ferromanganese metallurgical plant feed has been proposed based on the visual texture of the ore particles (Mn, Fe, and Al₂O₃ rich) and radial basis neural network. The visual texture of ore particles vary with the mineral contents. This information can be quantified by using image processing technique in RGB color space and, first and second-order statistical analysis. Commonly used Hartlic’s textural features was calculated and presented as neural network inputs along with red, green and blue color values for 5 × 5 pixel size windowpanes extracted from three separate images. Results obtained show encouraging accuracy to apply the approach to develop an expert system for on line ore quality monitoring to control the ore blending in the feed ore circuits as well as separating gangue minerals present in the feed ores. Matlab^® 7.0 was used for visual textural analysis and neural network classification.     

Tensile and Fracture Properties of Aluminium Alloy AA2219-T87 Friction Stir Weld Joints for Aerospace Applications

Metallurgical and Materials Transactions A - The purpose of the present work is to study the mechanical behaviour of AA2219-T87 friction stir weld (FSW) joints at different temperatures (Room...     

Low Cost Porous Alumina with Tailored Microstructure and Thermal Conductivity Prepared using Rice Husk and Sucrose

This study demonstrates a cost‐effective way to fabricate porous ceramics with tailored porosity and pore microstructure using 5–40 wt% rice husk (RH) in <75 μm, 75–180 μm, 180–355 μm, 355–420 μm, and 420–600 μm size, as pore former. Sucrose, used as binder, also acted as a pore former. Porous alumina compacts with 20%–66% volume fraction porosity and 50–516 μm pore size (length) were successfully fabricated. Microstructure of samples reveal randomly oriented elongated coarse pores and fine pores (avg. size 4 μm), created during burnout of RH and sucrose, respectively. Samples with isolated and/or interconnected pores were fabricated using this process. Thermal conductivity of the samples prepared was measured using Transient Plane Source (TPS) technique. Thermal conductivity ranges from 1.2 to 24 W/mK. Experimental results agree closely with predictions made based on Effective Medium Theory (EMT) for a two‐phase system.     

PBS/PHB共混合金的制备及其性能

采用双螺杆挤出机将聚羟基丁酸酯(PHB)与聚丁二酸丁二酯(PBS)熔融共混,制备了PBS/PHB合金,并研究了其性能.结果表明:PBS与PHB组成了热力学互容体系;随着PHB用量的增加,PBS/PHB合金的晶体形态为尺寸逐渐减小的环带球晶,合金的拉伸强度与韧性显著增加;PBS/PHB合金在紫外光老化后的抗冲击性能下降,...     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.     

Mechanical,electrical and thermal performance of hybrid polyethylene-graphene nanoplatelets-polypyrrole composites: a comparative analysis of 3D printed and compression molded samples

ABSTRACT

The paper focuses on the investigation of the 3D printing of multi-functional composites using graphene nanoplatelets (GNP), polypyrrole (PPY) and linear low-density polyethylene (LLDPE). A holistic approach was performed and characterization methods to assess the properties of 3D printed composites and compared with those of compression molded composites and neat LLDPE to understand the factors affecting their performance. It has been noted that the 3D printed composites have superior mechanical and electrical properties than neat LLDPE, but slightly lower compared to those of compression molded composites having high packing density of fillers. The nominal increases were 13.2% (tensile strength), 31.9% (flexural strength), 29.4% (flexural modulus) and 24.7% (storage modulus).     

Degradation of Thermal Barrier Coatings by Fuel Impurities and CMAS: Thermochemical Interactions and Mitigation Approaches

Degradation of free-standing yttria-stabilized zirconia (YSZ) and CoNiCrAlY coatings (300 μm) due to V₂O₅ and a laboratory-synthesized CMAS was investigated at temperatures up to 1400 °C. Reactions, phase transformations, and microstructural development in coatings were examined by using x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The molten deposits destabilized the YSZ and reacted with the thermally grown oxide with various phase transformations and reaction product formation. A dense, continuous environmental barrier overlay, based on oxides, applied by electrophoretic deposition was effective in mitigating the molten deposit attack. Enriching CMAS composition with Al promoted the crystallization of anorthite platelets and MgAl₂O₄ spinel, and mitigated CMAS ingression. EPD MgO overlay was also effective in protection against V₂O₅ melt by formation of magnesium vanadates. EPD alumina overlay deposited on thermal barrier coatings with APS 8YSZ and bond-coated IN939 superalloy retained its adhesion and structural integrity after prolonged furnace thermal cycle test at 1100 °C.     

Performance evaluation of CBN,coated carbide,cryogenically treated uncoated/coated carbide inserts in finish-turning of hardened steel

In the present work, the performance of cubic boron nitride (CBN) inserts was compared with coated carbide and cryogenically treated coated/uncoated carbide inserts in terms of flank wear, surface roughness, white layer formation, and microhardness variation under dry cutting conditions for finish turning of hardened AISI H11 steel (48–49 HRC). The flank wear of CBN tools was observed to be lower than that of other inserts, but the accumulated machining time for all the four edges of carbide inserts were nearer to or better than the PCBN inserts. Results showed that tool life of carbide inserts decreased at higher cutting speeds. The surface roughness achieved under all cutting conditions for coated-carbide-treated/untreated inserts was comparable with that achieved with CBN inserts and was below 1.6 μm. The white layer formation and microhardness variation is less while turning with cryogenically treated carbide inserts than the CBN and untreated carbide. At low to medium cutting speed and feed, the performance of carbide inserts was comparable with CBN both in terms of tool life and surface integrity.