调节阀流量特性控制分析

介绍了调节阀的流量基本知识，从控制理论的角度，分析了调节阀的理想流量特性、工作流量特性和系统稳定性，指出了在热工领域内应用调节阀时的一些注意事项。     

近期全国建材市场走势展望

结合当前我国建材市场的形势 ,就建材市场“涨价风潮”的起因 ,从经济增长的结果、市场运行的规律等方面进行了论述 ,提出了涨价风潮对近期全国建材市场的影响     

TiB2和SiCW对Al2O3陶瓷材料高温摩擦磨损特性的影响

研究了Ａｌ２Ｏ３、Ａｌ２ｏ３／ＴｉＢ２和Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ三处陶瓷材料在不同条件下的擦靡损特性。结果表明：三种陶瓷材料与硬质合金摩擦副的摩擦系数随温度温度的增加有不同的变化规律，摩擦表面的Ｘ射线衍射分析表明，摩擦系数的变化与陶瓷物膜的和结构有关，在高温下Ａｌ２Ｏ３／ＴｉＢ２陶瓷材料摩擦表面形成了具有优良的高温润性的ＴｉＯ２氧化膜，因而ＴｉＢ２的加入明显改善了Ａｌ２Ｏ３陶瓷材料 摩擦磨损     

Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

有色高收缩涤纶毛条的研制

就生产有色高收缩涤纶毛条的工艺路线进行了比较．从主要纺丝工艺对收缩性的影响优选了物理改性祛的生产工艺，研制了满足精纺要求的有色高收缩涤纶毛条．     

3700系统死机问题之我见

本文从原理出发,对3700系统死机的根源进行了探索。作者认为,死机是由死循环造成的,且绝大多数死循环都与中断有关,而RACKO-TACKO菊花链及错误的返回地址则是引起死机的主要原因。通过对几个死机实例的详尽分折,作者也提出了寻找和分折死循环的一般性方法。     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

一种新型同位素示踪剂载体及应用

同位素沾污、低注井同位素示踪剂因沉降造成的上返速度慢或无法上返、大孔道地层同位素示踪剂失踪等是影响注水开发油田后期吸水剖面测井资料质量的主要问题。同位素示踪剂载体的物理参数，尤其是其密度，是产生上述问题的重要因素。通过对同位素示踪剂载体技术指标优选而生产的一种新型同位素示踪剂，可以解决低注井同位素上返速度慢的问题，并能有效识别大孔道地层，减少同位素沾污。这种同位素示踪剂载体已在河南油田吸水剖面测井中应用，并见到了很好的效果。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。