Mechanochemical Synthesis of Magnesium Aluminate Spinel Powder at Room Temperature

MgAl₂O₄ spinel was successfully synthesized using a mechanochemical route that avoided the formation and calcination of its precursors at high temperatures. The method involved a single step in which γ-Al₂O₃–MgO, AlO(OH)–MgO, and α-Al₂O₃–MgO mixtures were milled at room temperature under air atmosphere. The formation of MgAl₂O₄ occurred faster with γ-Al₂O₃ than with AlO(OH) or α-Al₂O₃. After 140 h, the mechanochemical treatment of the γ-Al₂O₃–MgO mixture yielded 99% of MgAl₂O₄.     

A sub-nanosecond Synchronized MAC – PHY cross-layer design for Wireless Sensor Networks

In this paper, we present a Wireless Sensor node implementation which aims at solving two major issues in Wireless Sensor Networks. This solution provides nanosecond-scale synchronization between nodes and high data-rate transmission thanks to cross-layer design and the time-domain properties of UltraWide Band (UWB) modulation schemes. The high data rate is achieved through a specific implementation of a IR-UWB physical layer. Specific algorithms are also implanted into the MAC and physical layers and form a cross-layered synchronization protocol for deterministic Wireless Sensor Networks named WiDeCS (Wireless Deterministic Clock Synchronization). This protocol propagates master time reference to nodes of a cluster tree network. WiDeCS Cross layered scheme is possible thanks to flag signals rising in the physical layer. These signals, owing to the UWB time domain properties, capture precise timestamps of transmission and reception. Hardware level simulations show a clock synchronization precision of 2 ns with a 2 GHz bandwidth signal, and an ASIC demonstrator shows 374 ps synchronization precision and 677 ps of standard deviation with the same bandwidth. In this paper, the physical layer implementation is detailed, and the cross-layered WiDeCS scheme is demonstrated.     

Determination of pyrethroids in chicken egg samples: development and validation of a confirmatory analytical method by gas chromatography/mass spectrometry

The aim of this study was to develop and validate an efficient analytical method based on gas chromatography/tandem mass spectrometry (GC/MS/MS) for detection and quantification of six pyrethroids residues (Phenothrin, Permethrin, Cyfluthrin, Cypermethrin, Deltamethrin and Fenvalerate) in chicken eggs. The method was based on a preliminary liquid–liquid extraction of albumen‐free yolk samples, followed by a clean‐up by solid‐phase extraction. GC/MS/MS analyses were carried out in the selected reaction monitoring mode. Validation parameters such as specificity, detection capability, decision limit, precision, recovery, stability and ruggedness were determined, resulting in compliance with Decision 2002/657/EC. No complicated apparatus are required; moreover, low volumes of organic solvents and a nonintensive manual labour are required. These low costs and simple procedure, based on rapid and safe operations, may represent a useful tool in the routine analysis of pyrethroids pesticides, in the place of the currently used conventional techniques.     

Preliminary Characterization of Novel Extra-cellular Lipase from Penicillium crustosum Under Solid-State Fermentation and its Potential Application for Triglycerides Hydrolysis

Current studies about lipase production involve the use of agro-industrial residues and newly isolated microorganisms aimed at increasing economic attractiveness of the process. Based on these aspects, the main objective of this work is to perform the partial characterization of enzymatic extracts produced by a newly isolated Penicillium crustosum in solid-state fermentation. Lipase extract presented optimal temperature and pH of 37?°C and 9?C10, respectively. The concentrated enzymatic extract showed more stability at 25?°C and pH?7. The enzymes kept 100% of their enzymatic activity until 60?days of storage at 4 and ?10?°C. The stability under calcium salts indicated that the hydrolytic activity presented decay with the increase of calcium concentration. The specificity under several substrates indicated good enzyme activities in triglycerides from C4 to C18.     

Experiences in building a Grid-based platform to serve Earth observation training activities

Earth observation data processing and storing can be done nowadays only using distributed systems. Experiments dealing with a large amount of data are possible within the timeframe of a lesson and can give trainees the freedom to innovate. Following these trends and ideas, we have built a proof-of-the-concept platform, named GiSHEO, for Earth observation educational tasks. It uses Grid computing technologies to analyze and store remote sensing data, and combines them with eLearning facilities. This paper provides an overview of the GiSHEO's platform architecture and of its technical and innovative solutions.     

Cobalt nanoparticles prepared by three different methods

This work aimed to study cobalt nanoparticles (Co-NPs) preparation using three different methods in order to evaluate the effect of synthesis variables that can influence the nanoparticle size distribution and particle shape. The synthesised nanoparticles were characterised by Transmission Electron Microscopy. The first synthesis employed decomposition of Co₂(CO)₈, at high temperatures. This procedure resulted in spherical nanoparticles with low size distribution. The size of Co-NPs could be tuned by modification of precursor/surfactant, nevertheless the stirring and injection time influenced the size distribution. Using polyol process, at high temperatures, it was produced undefined-shape nanoparticles. This result suggests that the solution composition, i.e. the amount of trioctylphosphine and oleic acid was not suitable to control both size and shape of nanoparticles. Finally, the method based on reduction with NaBH₄ resulted spherical nanoparticles with tiny sizes, indicating that in this case a variation on amount of reductant would be more efficient on the particle size control than a variation in concentration of oleic acid. These results indicated that, for each method, a different variable exists for the control of the distribution size and the shape of the formed particles.     

Inertization of Coal Ashes by the Vitrification Technique: A Mixture Design Approach

This article deals with the study of the vitrification mechanism as an inertization method for coal ashes contaminated with heavy metals. Ashes from coal (thermoelectric) and wastes from mining of fluorite and feldspar and from plating were used to compose vitreous systems using a mixture design. The chemical composition of the wastes was determined by XRF and the formulations were melted at 1450°C for 2 h using 10% (mass) of Na₂CO₃ (as a fluxing agent). The glasses were poured into a mold and annealed (600°C). The characteristic temperatures were determined by thermal analysis (DTA, air, 20°C/min) and the mechanical behavior by HV. As a result, the softening temperature is strongly dependent on silica content of each glass, and the fluorite residue, being composed mainly by silica, strongly affects on the glass transition (T_g) and softening (T_s) temperatures. The hardness by micro-indentation of all glasses is mainly affected by the plating (galvanic) residue due to the high iron and zinc content of this waste.     

Liquid-liquid extraction of protease from cold-adapted yeast Rhodotorula mucilaginosa L7 using biocompatible and biodegradable aqueous two-phase systems

This work aimed to optimize the extraction of an extracellular protease produced by the cold-adapted yeast Rhodotorula mucilaginosa L7 using aqueous two-phase systems (ATPS) comprising polyethylene glycol (PEG) and sodium citrate or sodium tartrate. First, the biocompatibility of the phase forming agents was assessed. The results obtained with PEG-2000, PEG-4000, and PEG-6000 demonstrated that even at large PEG concentrations (32 wt%) the protease maintains its activity after 3 h of reaction, whereas an increase in salt concentration provokes a gradual decrease in protease stability. Subsequently, the partitioning of the protease in both types of ATPS was assessed, evaluating the effect of temperature, molecular weight, and concentration of PEG on protease purification, using two 2³-full factorial designs. The best partitioning conditions were obtained in PEG-6000/sodium tartrate-based ATPS, at 30ºC (with a yield of 81.09 ± 0.66% and a purification factor of 2.51 ± 0.03). Thus, considering the biodegradable characteristics of the system, the PEG/sodium tartrate ATPS is a viable and economic low-resolution step in protease purification, with a strong potential for future industrial application.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Structure–property relationship of sodium deoxycholate based poly(ester ether)urethane ionomers for biomedical applications

New sodium deoxycholate based poly(ester ether)urethane ionomers were prepared for the development of biomedical materials. A structure–property relationship in the tested biomaterials was established by cross‐examination of the dynamic mechanical and dielectric properties, attenuated total reflection–Fourier transform infrared investigation, thermogravimetric analysis, and surface morphology characterization. A stronger ionic interaction and solvation capacity of the ions and a higher ionic conductivity were manifested in the case of poly(ethylene oxide)‐rich segments than for poly(propylene oxide)‐rich segments in these polyurethane ionomers. The molecular and ionic interactions of the bile‐salt moiety with different polyether cosoft segments influenced chain packing and conformation, supramolecular organization, and the resulting surface morphological microstructures of the polyurethane biomembranes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42921.