Co-pyrolysis of pine cone with synthetic polymers

Biomass from pine cone (Pinus pinea L.) was co-pyrolyzed with synthetic polymers (PE, PP and PS) in order to investigate the effect of biomass and plastic nature on the product yields and quality of pyrolysis oils and chars. The pyrolysis temperature was of 500 °C and it was selected based on results from thermogravimetric analysis of the studied samples. Co-pyrolysis products namely gases, aqueous and tar fraction coming from biomass, oils from synthetic polymers and residual char were collected and analyzed. Due to the synergistic effect in the pyrolysis of the biomass/polymer mixtures, higher amounts of liquid products were obtained compared to theoretical ones. To investigate the effect of biomass content on the co-pyrolysis, the co-pyrolysis of pure cellulose as model natural polymer for biomass with polymer mixture was also carried out. In the presence of cellulose, degradation reaction leading to more gas formation and less char yield was more advanced than in the case of co-pyrolysis with pine cone. Co-pyrolysis gave polar oxygenated compounds distributed between tar and aqueous phase and hydrocarbon oils with composition depending on the type of synthetic polyolefin. Co-pyrolysis chars had higher calorific values compared to pyrolysis of biomass alone.     

Supramolecular and nanochemistry

The following contributions describe various research activities of the Department of Chemistry, University of Basel in the area of nanochemistry and supramolecular chemistry.     

Chemical oxidation of residual carbon from ZnAl2O4 powders prepared by combustion synthesis

The removal of carbon residue from ZnAl₂O₄ nanopowders by annealing at 500–800 °C leads to a decrease of specific surface area from 228.1 m²/g to 47.6 m²/g. At the same time, the average crystallite size increased from 5.1 nm to 14.9 nm. In order to overcome these drawbacks, a new solution for removing the carbon residue has been suggested: chemical oxidation using hydrogen peroxide. In terms of carbon removal, a H₂O₂ treatment for 8 h at 107 °C proved to be equivalent to a heat treatment of 1 h at 600 °C. The benefits of chemical oxidation over thermal oxidation were obvious. The specific surface area was much larger (188.1 m²/g) in the case of the powder treated with H₂O₂. The average crystallite size (5.8 nm) of ZnAl₂O₄ powder treated with H₂O₂ was smaller than the crystallite size (8.2 nm) of the ZnAl₂O₄ powder annealed at 600 °C.     

Enhancement of β phase crystals formation with the use of nanofillers in PVDF films and fibres

Nanoclay and carbon nanotubes (CNT) have been in focus recently as means of enhancing β phase crystals formation in poly(vinylidene fluoride)(PVDF). Dominantly, the so-far work has been carried out on films/thin sheets filled with nanoclay. It has been found, mainly from combined XRD and DSC data, that nanoclay influences the PVDF structure, and particularly the β phase crystals formation is enhanced. Results published by various groups are in fairly good agreement. There are no results for nanoclay filled melt-spun PVDF fibres.The influence of CNT on PVDF structure has been less studied. XRD data indicating an enhancing role of multi-wall carbon nanotubes (MWNT) on β phase crystals formation in solution compounded PVDF films are available. Published results for MWNT/PVDF films are not in good agreement. The only study into single-wall carbon nanotube (SWNT)/PVDF has been made on electrospun nanofibres.We explore above findings towards melt-spun nanofilled PVDF fibres. We present new results obtained by us for melt-spun PVDF fibres containing non-functionalized and amino-functionalized double-wall carbon nanotubes (DWNT). The key finding is that amino-DWNT can influence the β to α polymorphic balance.     

A new approach for the validation of skeletal muscle modelling using MRI data

Active and passive experiments on skeletal muscles are in general arranged on isolated muscles or by consideration of the whole muscle packages, such as the arm or the leg. Both methods exhibit advantages and disadvantages. By applying experiments on isolated muscles it turns out that no information about the surrounding tissues are considered what leads to insufficient specifications of the isolated muscle. Especially, the muscle shape and the fibre directions of an embedded muscle are completely different to that of the same isolated muscle. An explicit advantage, in contrast, is the possibility to study the mechanical characteristics in an unique, isolated way. On the other hand, by applying experiments on muscle packages the aforementioned pros and cons reverse. In such situation, the whole surrounding tissue is considered in the mechanical characteristics of the muscle which are much more difficult to identify. However, an embedded muscle reflects a much more realistic situation as in isolated condition. Thus, in the proposed work to our knowledge, we, for the first time, suggest a technique that allows to study characteristics of single skeletal muscles inside a muscle package without any computation of the tissue around the muscle of interest. In doing so, we use magnetic resonance imaging data of an upper arm during contraction. By applying a three-dimensional continuum constitutive muscle model we are able to study the biceps brachii inside the upper arm and validate the modelling approach by optical experiments.     

Sustainability evaluation of decentralized electricity generation

Decentralized power generation is gaining significance in liberalized electricity markets. An increasing decentralization of power supply is expected to make a particular contribution to climate protection. This article investigates the advantages and disadvantages of decentralized electricity generation according to the overall concept of sustainable development. On the basis of a hierarchically structured set of sustainability criteria, four future scenarios for Germany are assessed, all of which describe different concepts of electricity supply in the context of the corresponding social and economic developments. The scenarios are developed in an explorative way according to the scenario method and the sustainability criteria are established by a discursive method with societal actors. The evaluation is carried out by scientific experts. By applying an expanded analytic hierarchy process (AHP), a multicriteria evaluation is conducted that identifies dissent among the experts. The results demonstrate that decentralized electricity generation can contribute to climate protection. The extent to which it simultaneously guarantees security of supply is still a matter of controversy. However, experts agree that technical and economic boundary conditions are of major importance in this field. In the final section, the article discusses the method employed here as well as implications for future decentralized energy supply.     

Effect of water content on thermal and dynamic mechanical properties of xanthan powder: A comparison between standard and novel techniques

In this work, the sorption isotherms of xanthan powder obtained under static and dynamic conditions and their fitting with mathematical models were discussed. The transitions within xanthan-water systems have been investigated using a standard material characterization technique - Differential Scanning Calorimetry (DSC) - and two novel techniques - Dynamic Mechanical Thermal Analysis (DMTA) material pocket and Phase Transition Analysis (PTA). It was found that within water-xanthan systems, the onset temperature for the melting of freezable water obtained from DSC method was in agreement with freezable water melting peaks obtained via DMTA material pocket at levels of hydration when the freezable water was present. Also, low-temperature transitions, related to polysaccharide-water interactions, were observed by both techniques within xanthan systems which contained no freezable water. However, the use of the PTA technique was limited to xanthan systems with low water content.     

The compatibility of the polystyrene/acrylonitrile-butadiene-styrene grafted copolymer system

Summary The study of polystyrene (PS)/acrylonitrile-butadiene-styrene (ABS) grafted copolymer/cyclohexanone or methylene chloride system compatibility both in concentrated solutions and solid state has been carried out by phase separation, viscosimetrical measurements and thermal behaviour.Having in view the obtained data it has been ascertained that the systems present different degrees of compatibility depending on the mixtures composition. At higher temperatures, the compatibility of the components is changed.