现代城市综合管理的本质、功能与体系再认识

城市综合管理需要建立一个超越部门的协调体制,包括建构一个市长牵头的城市综合管理委员会,下设专门的办公室,并与专门设置或指定的城市综合管理部门合署办公,同时建立与城市基础功能有关的部门、单位之间的公务协助机制,制定履行城市综合管理职能的评价指标和奖惩标准,完善城市综合管理的相关法规或文件,引入数字技术等现代化手段和社会公众等监督与评价机制。     

Spectroscopic and electrical properties of 3-alkyl pyrrole-pyrrole copolymers

Three types of copolymers composed of pyrrole and 3-alkyl pyrroles (with alkyl being pentyl, nonyl and undecyl) have been synthesized. A strong linear dependency of the alkyl chain length on the as-prepared copolymer physical properties is demonstrated via (a) DSC (for phase transition temperatures and enthalpy changes) and (b) UV-vis (for wavelengths of the polaronic and bipolaronic electronic transitions, and ratio of the corresponding absorbances). A trend in the copolymers' doping level vs alkyl chain length is also estimated, via IR, by taking the ratio of band intensities of the stretching modes of the polaronic and bipolaronic species. The copolymers are found to be soluble in organic solvents and their solutions can be cast onto glass substrates or metals resulting in thin films, which can be used as the electroactive component of Schottky diodes. The electrical properties of these diodes are also found to be dependent on increasing 3-alkyl chain length.     

A facile antistatic modification of polyester fiber based on ion-exchange reaction of sulfonate-modified polyester and various cationic surfactants

A new technique for imparting antistatic properties to poly(ethylene terephthalate) (PET) fiber has been developed. In this technique, blend polyester fibers containing poly(ethylene terephthalate/5-sulfoisophthalate) (SIP-PET) were prepared by blend spinning and then treated with various cationic surfactants in the process of dyeing. The surfactants could effectively be immobilized on the fiber as the counter cations of the sulfonate groups of the 5-sulfoisophthalate (SIP) units and aid the release of static electrons formed in the fiber. Thus, the half-life time (t_1/2) of leakage of static charge and the surface resistivity (Rs) of the blend PET fibers became much lower after treating. The best result was obtained with a methylated quaternary ammonium salt of a stearylamine-ethylene oxide (EO) adduct or hydrochloride of a laurylamine-EO adduct as the surfactant of which the number of EO units was around ten. Even after five washing cycles the t_1/2 value of the fibers treated with these surfactants was kept lower than 30 s with the Rs value maintained in the order of 10¹³ Ω cm^-2. Therefore, the present technique could be useful for practical production of polyester fibers with “semi-permanent” antistatic properties which can be recovered by re-treatment even if they were lost.     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

Isosteric heat of sorption of CO2 in poly(ethylene terephthalate)

Sorption isotherms for carbon dioxide in poly(ethylene terephthalate) have been measured at 35–55°C. The isotherms were measured gravimetrically on a Mettler Thermoanalyzer-1 from vacuum to 1 atmosphere. The sorption data were used to generate sorption isotherms from which the isosteric heat of sorption of CO₂ in PET was determined. At 45°C the isosteric heat of sorption increases from −10 kcal/mole at a concentration of 0.5 cm³ (STP)/cm³ (polymer) to −8 kcal mole⁻¹ at a concentration of 1.5 cm³ (STP)/cm³ (polymer). It has been reported in the literature that the isosteric heat of sorption for this system decreased through a minimum before increasing with increasing concentration. Our measurement of the low-pressure sorption isotherms shows that this is not the case.     

Synthesis of copoly(ethylene terephthalate /imide)s and crystallization kinetics

Copoly(ehtylene terephthalate/imide)s (PETI) were prepared by melt polycodensation of bis(2-hydroxyethyl)terephthalate (BHET) and imide containing comonomer, 4,4′-bis[(4-carbo-2-hydroxyethoxy)phthalimido]diphenylmethane (BHEI) with Sb₂O₃ as catalyst at 280°C under vacuum (～ 1 mm Hg). The change of T_m with an increase of the BHEI repeat unit in the PETI copolymer was analyzed by the Flory equation. On isothermal crystallization, a longer induction time and a lower activation energy than for the PET homopolymer were observed with an increasing amount of BHEI repeat unit. The Avrami exponent, n, increased from 1.5 to 2.3 as the content of BHEI or crystallization temperature was increased. The Avrami rate constant K decreased with the increase of the BHEL unit. On nonisothermal crystallization, the Ozawa equation and Lawton plot were used to investigate the effect of BHEI units on the crystallization kinetics of PETI copolymers. From the change of the cooling crystallization function and the result of the Lawton plot, it was found that the BHEI unit effectively decreases the rate of crystallization.     

面向新一代智能电表的微电流指纹自动配对技术

针对智能电表与表后断路器大多依赖人工掌机扫码进行配对,配对过程过度依赖人工,成本高,且容易发生误配对串户等问题,提出了面向新一代智能电表的微电流指纹自动配对技术。该技术通过在蓝牙断路器内置开关电容模块和编码电路,将配对特征码信息调制成无功电流信号,利用电力线传输至智能电表,并与蓝牙断路器广播发送的配对特征码信息进行比对,从而实现智能电表与表后断路器的自动配对。该配对过程无需依赖人工,极大地降低了人工成本,提高了配对的准确性。最后,实验验证了所提的微电流指纹自动配对技术的正确性和有效性。     

镁合金废料的回收

在镁合金零部件生产过程中，特别是在压力铸造生产中，产生出来的废料以及使用后报废的镁合金零件逐渐增多。出于成本和环境因素的考虑，必须对这与日俱增的镁合金废料进行有效回收。本文以生产占90％的镁合金零部件压力铸造为主线，介绍镁合金废料回收的经济分析，镁合金废料的来源和分类、现行回收技术的现状及发展趋势。并介绍香港生产力促进局和重庆硕龙科技公司最近研究开发的一种新型镁合金废料现场精炼回收系统。     

Toward a classification of discourse patterns in asynchronous online discussions

The goal of this study was to develop a classification for a range of discourse patterns that occur in text-based asynchronous discussion forums, and that can aid in the distinction of three modes of discourse: knowledge sharing, knowledge construction, and knowledge building. The dataset was taken from Knowledge Forum® databases in the Knowledge Building Teacher Network in Hong Kong, and included three discussion views created for different classes: Grade 5 Science, Grade 10 Visual Arts, and Grade 10 Liberal Studies. We used a combination of qualitative coding and narrative analysis as well as teachers’ understanding of online discourse to analyze student discussions. Nine discourse patterns were identified. These patterns revealed a variety of ways in which students go about their collaborative interactions online and demonstrated how and why students succeed or fail in sustaining collaborative interactions. This study extended the three modes of online discourse and developed different discourse patterns, which are efforts to provide instructional guidance. The implications of supporting productive discourse and the enactment of CSCL innovations in classrooms are discussed.