An experimental design approach to the optimisation of a flow injection analysis method for glycine

A flow injection analysis method for the determination of glycine, based on the reaction with ortho-phtalaldehyde and N-acetylcysteine in a basic buffer, was optimised. In the first step screening of the variables, to select the most important ones, was performed using: (i) a half-fraction factorial design and (ii) a quarter-fraction factorial design, for five factors at two levels. The effects of the factors on the peak height were calculated from both screening designs and compared. For the half-fraction factorial design (resolution IV), the significance of the factor effects on the peak height was checked by: (i) comparing them with a critical effect, calculated from two-factor interactions and based on a t-test, (ii) using a non parametric approach and (iii) drawing a normal probability plot. For the quarter-fraction factorial design (resolution III) the significance of the effects of the factors on the peak height was checked using: (i) a randomization test method, (ii) the non parametric method and (iii) a normal probability plot. In the second step, the factor found to be of importance was optimised using the uniplex method.     

Molybdenum carbide catalysts for water–gas shift

Molybdenum carbide (Mo₂C) was demonstrated to be highly active for the water–gas shift of a synthetic steam reformer exhaust stream. This catalyst was more active than a commercial Cu–Zn–Al shift catalyst under the conditions employed (220–295°C and atmospheric pressure). In addition, Mo₂C did not catalyze the methanation reaction. There was no apparent deactivation or modification of the structure during 48 h on‐stream. The results suggest that high surface area carbides are promising candidates for development as commercial water–gas shift catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.     

Introduction

In the planning of a new passenger railway in Perth over many years, state agencies have actively pursued opportunities for transit-oriented development along its route. There is a strong policy framework demonstrating clear intent on the type of development required. Designing a transport system to compete with the car in an established low-density suburban environment has, however, raised some significant challenges for land-use planning. This article reports the results of research aimed at assessing changes in non-residential land use and the behavioural responses of local businesses in three emerging transit-oriented development precincts. It examines the first wave surveys of land use and businesses in 2006, the year before the railway opened, questioning the extent to which business has anticipated the new railway. The findings indicate that, despite good policy intent, planning in anticipation of the railway has been weak and insufficient attention was paid to implementation of important strategic planning principles and policies. While some land uses are compatible with transit-oriented development, these businesses employ small numbers, at odds with policies that required high trip generating development. Businesses have not shown a particularly strong interest in the new railway, their location decisions appear to reflect standard business practice rather than being influenced by opportunities created by the railway. There is a glimmer of anticipation—incoming businesses are more positive about the opportunities the railway may bring than those established in the station precincts before the 2001 railway route was announced. In particular, a significantly higher proportion of businesses in one case study station precinct are positive about opportunities created by the railway.     

Study of silicon photomultipliers fast amplifier and thermoregulation

The silicon photomultipliers (SiPM) are adopted in various physical applications, from medical physics to astrophysics, for their advantages in terms of cost and weight with respect to traditional photo detectors. Their low bias voltage supply (about 30 V), hardiness and resistance to magnetic field are ideal characteristics for space application. In the frame of INFN-Irst collaboration, some of them have been developed and produced at FBK (Trento-Italy), and have been characterized in the INFN laboratories of Bologna (DaSiPM2 collaboration).The SiPM can be used in conjunction with fibres and counters in high energy physics experiments. To exploit the SiPM time resolution, a fast amplifier has been studied. The SiPM gain depends critically on temperature and a thermal stabilization is also necessary. The use of a thermoelectric cooler module based on a Peltier cell has been investigated, and the results are shown.     

Mechanically based models: Adaptive refinement for B‐spline finite element

This article presents two new methods for adaptive refinement of a B‐spline finite element solution within an integrated mechanically based computer aided engineering system. The proposed techniques for adaptively refining a B‐spline finite element solution are a local variant of np‐refinement and a local variant of h‐refinement. The key component in the np‐refinement is the linear co‐ordinate transformation introduced into the refined element. The transformation is constructed in such a way that the transformed nodal configuration of the refined element is identical to the nodal configuration of the neighbour elements. Therefore, the assembly proceeds as with classic finite elements, while the solution approximation conforms exactly along the inter‐element boundaries. For the h‐refinement, this transformation is introduced into a construction that merges the super element from the finite element world with the hierarchical B‐spline representation from the computational geometry. In the scope of developing sculptured surfaces, the proposed approach supports C⁰ as well as the Hermite B‐spline C¹ continuous shapes. For sculptured solids, C⁰ continuity only is considered in this article. The feasibility of the proposed methods in the scope of the geometric design is demonstrated by several examples of creating sculptured surfaces and volumetric solids. Numerical performance of the methods is demonstrated for a test case of the two‐dimensional Poisson equation. Copyright © 2003 John Wiley & Sons, Ltd.     

High-dose chemotherapy with autologous hematopoietic progenitor-cell support as part of combined modality therapy in patients with inflammatory breast cancer

PURPOSE: To evaluate the feasibility of high-dose chemotherapy (HDC) with autologous hematopoietic progenitor-cell support (AHPCS) as part of combined modality therapy (CMT) in patients with inflammatory breast cancer (IBC). PATIENTS AND METHODS: From April 1993 to March 1997, 30 patients with IBC were treated at our program. Twenty-three patients received neoadjuvant chemotherapy (NAC) before HDC; 18 patients also received adjuvant chemotherapy following surgery, but before HDC. All patients received HDC with high-dose cyclophosphamide, cisplatin, and carmustine (BCNU) with AHPCS. Every patient underwent surgery either before (27 patients) or after (three patients) HDC. Patients received radiotherapy after HDC in addition to tamoxifen if their tumors were estrogen receptor-positive. RESULTS: Thirteen patients experienced grade 3 or 4 nonhematologic noninfectious toxicities. In 12 patients (40%), this represented drug-induced lung injury, which in all cases responded to a 10-week course of corticosteroids. The only treatment-related death was secondary to hemolytic-uremic syndrome (HUS). Another patient suffered grade 4 CNS toxicity, which was completely reversible. All patients engrafted promptly. Eight patients relapsed, five of whom had a poor pathologic response to NAC. Relapses were local (five patients), local plus systemic (one), or systemic only (two). Median follow-up time from diagnosis and HDC is 23.5 (range, 7 to 49) and 19 (range, 4 to 44) months, respectively. Twenty-one patients (70%; 95% confidence interval [CI], 51% to 86%) remain alive and free of disease 4 to 44 months after HDC. Median disease-free survival (DFS) and overall survival have not yet been reached. CONCLUSION: HDC as part of CMT is feasible in patients with IBC. The toxicity of this treatment program is significant, but tolerable. Despite the short follow-up duration, the promising DFS observed in this group of patients warrants randomized studies that include a HDC-containing arm in patients with IBC.     

Apoptosis after traumatic human spinal cord injury

OBJECT: Apoptosis is a form of programmed cell death seen in a variety of developmental and disease states, including traumatic injuries. The main objective of this study was to determine whether apoptosis is observed after human spinal cord injury (SCI). The spatial and temporal expression of apoptotic cells as well as the nature of the cells involved in programmed cell death were also investigated. METHODS: The authors examined the spinal cords of 15 patients who died between 3 hours and 2 months after a traumatic SCI. Apoptotic cells were found at the edges of the lesion epicenter and in the adjacent white matter, particularly in the ascending tracts, by using histological (cresyl violet, hematoxylin and eosin) and nuclear staining (Hoechst 33342). The presence of apoptotic cells was supported by staining with the terminal deoxynucleotidyl transferase-mediated deoxyuridinetriphosphate nick-end labeling technique and confirmed by immunostaining for the processed form of caspase-3 (CPP-32), a member of the interleukin-1beta-converting enzyme/Caenorhabditis elegans D 3 (ICE/CED-3) family of proteases that plays an essential role in programmed cell death. Apoptosis in this series of human SCIs was a prominent pathological finding in 14 of the 15 spinal cords examined when compared with five uninjured control spinal cords. To determine the type of cells undergoing apoptosis, the authors immunostained specimens with a variety of antibodies, including glial fibrillary acidic protein, 2',3'-cyclic nucleotide 3'-phosphohydrolase (CNPase), and CD45/68. Oligodendrocytes stained with CNPase and a number of apoptotic nuclei colocalized with positive staining for this antibody. CONCLUSIONS: These results support the hypothesis that apoptosis occurs in human SCIs and is accompanied by the activation of caspase-3 of the cysteine protease family. This mechanism of cell death contributes to the secondary injury processes seen after human SCI and may have important clinical implications for the further development of protease inhibitors to prevent programmed cell death.     

KvLQT1 potassium channel but not IsK is the molecular target for trans-6-cyano-4-(N-ethylsulfonyl-N-methylamino)-3-hydroxy-2,2-dimethyl- chromane

Several authors have considered two-locus models as a basis for the inheritance of complex diseases. The purpose of this paper is to give a simple general formulation to derive the additive, dominant, and epistatic effects, and hence the corresponding variance components, for any multilocus model. These variance components should be useful for investigating the power of model-free linkage analysis to detect various modes of multilocus inheritance.     

Improving End System Performance for Multimedia Applications over High Bandwidth Networks

Digital video services, scientific visualization and other multimedia applications require delivery of high network throughput to end user applications. In this paper we identify bottlenecks in the data path between high-speed networks and applications. Using performance of multimedia applications as a metric, the effectiveness of solutions to reduce network, operating system, and user bottlenecks is explored experimentally.     

Tracing the spread of methicillin-resistant Staphylococcus aureus by Southern blot hybridization using gene-specific probes of mec and Tn554

In a community hospital in Brooklyn, New York, over a 3-year period, 79 methicillin-resistant Staphylococcus aureus (MRSA) isolates from five different case clusters were subtyped by Southern blot hybridization with two previously characterized gene probes, mec and Tn554. Together, the genotyping enabled the hospital infection control team to differentiate simultaneous MRSA clusters in the surgical intensive care unit (type I:A) and the open heart unit (type II:J), document the spread of one strain (type I:A) between roommates, identify an endemic strain (type II:J) from cardiac monitors and medical personnel, and identify an unrelated outbreak strain (type II:NH) in the labor and delivery unit. On the basis of this investigation it is clear that the routine DNA fingerprinting of MRSA in health care facilities, to monitor their spread and identify cases of nosocomial infections, is an important infection control measure.