High permittivity BaTiO3 and BaTiO3-polymer nanocomposites enabled by cold sintering with a new transient chemistry: Ba(OH)2∙8H2O

Cold sintering process (CSP) offers a promising strategy for the fabrication of innovative and advanced high permittivity dielectric nanocomposite materials. Here, we introduce Ba(OH)₂?8H₂O hydrated flux as a new transient chemistry that enables the densification of BaTiO₃ in a single step at a temperature as low as 150 °C. This remarkably low temperature is near its Curie transition of 125 °C, associated with a displacive phase transition. The cold sintered BaTiO₃ shows a relative density of 95 % and a room temperature relative permittivity over 1000. This new hydrated flux permits the fabrication of a unique dense BaTiO₃-polymer nanocomposite with a high volume fraction of ceramics ((1-x) BaTiO₃ – x PTFE, with x = 0.05). The composite exhibits a relative permittivity of approximately 800, at least an order of magnitude higher than previous reports on polymer composites with BaTiO₃ nanoparticle fillers that are typically well below 100. Unique high permittivity dielectric nanocomposites with enhanced resistivities can now be designed using polymers to engineer grain boundaries and CSP as a processing method opening up new possibilities in dielectric materials design.     

Highly resolved numerical simulation of combustion in supersonic hydrogen–air coflowing jets

The present study is focused on the analysis of non-premixed combustion in high-velocity (supersonic) flows. The computations make use of a large eddy simulation (LES) model, which has been recently introduced to address combustion in high Reynolds number turbulent flows featuring moderate Damköhler values. We expect that the corresponding closure is able to account for the specificities encountered in high Mach number turbulent reactive flows featuring chemical reaction time scales with the same order of magnitude as flow time scales. The model takes finite-rate chemistry and micro-mixing effects into account within the framework of the partially stirred reactor (PaSR) concept, it is hereafter denoted by U-PaSR (unsteady partially stirred reactor). (i) In a first step of the present investigation, the capabilities of the U-PaSR closure hence proposed are evaluated through a detailed comparison performed between numerical results and the data obtained from an experimental study devoted to non-premixed combustion in supersonic co-flowing jets of hydrogen and vitiated air. The simulated test case corresponds to a well-documented experimental database that includes Raman scattering and laser-induced pre-dissociative fluorescence measurements. The comparisons performed between computational results and experimental data establish that the physical processes are well-described by the performed simulation. (ii) In a second step of this study, the flame structure and associated stabilization zone are analysed in the light of numerical simulation results. The post-processing to the computational results indeed confirms the importance of self-ignition processes, as well as the relevance of diagnostic tools recently introduced by Boivin et al. [1,2]. Considering the stabilization zone, it also emphasizes the essential importance of the pressure dynamics associated with the discharge of compressible coflowing jets into the atmosphere – an importance that was not so clearly evidenced from previous numerical simulations conducted on the same experimental benchmark.     

Identification of the Elastic–Plastic Behavior of Adhesively Bonded Structures Under Multi-Axial Loadings: Comparison of a Modified Arcan Test and a Tension/Compression–Torsion Test

Structural bonding is nowadays widespread in the industry. However, characterisation methods and 3D modelling of the adhesives need to be improved. The characterisation requires an experimental procedure to obtain a large experimental database under various loading cases, which represents a significant amount of data. The 3D modelling requires advanced models with several parameters to identify and generally uses inverse identification procedures, which can be time expensive. For a good accuracy, the constitutive models need to take into account the dependency on the hydrostatic stress and be written under the non-associated formalism. In this study, the experimental database is obtained via a modified Arcan test that can cover a wide range of loadings between tension, shear, mixed tension–shear, and mixed compression–shear. A second experimental campaign is realized with a tension/compression–torsion (TCT) test that can cover a greater range of loadings: from tension to compression and mixed tension/compression–shear, with an infinite possibility of mixed loadings. The modified Arcan database is used to identify a 3D elastic–plastic Mahnken–Schlimmer type model, according to an inverse identification procedure developed in a previous study. This model identification is validated on the experimental database coming from the TCT test: a numerical/experimental comparison is realized. This allows the validation of the model and emphasizes the benefits of the TCT test. Indeed, it proves that this test is well suited to characterize adhesive joints and presents several capacities that will be really useful for further studies, like an infinite range of non-proportional loadings available.     

Co/SiO2 catalysts prepared from Co2(CO)8 for CO hydrogenation into alcohols and hydrocarbons: characterization by magnetic methods and temperature-programmed hydrogenation

The hydrogenation of carbon monoxide over Co/SiO₂ catalysts obtained by reduction of precursors prepared by the reaction of dicobaltoctacarbonyl with silica gives rise to a mixture of alcohols and hydrocarbons. The chain growth probability for hydrocarbon synthesis is similar to that observed over conventional catalysts prepared by the ammonia method (=0.74) with a comparable metal dispersion (metal particle size 4 nm). Alcohol formation yields a smaller chain growth probability (=0.42). Magnetic measurements have shown that in the latter catalyst, small cobalt clusters (1 nm) are likely to be present together with the cobalt particles (4 nm), this observation reconciles apparently conflicting results from the literature. It has been speculated that alcohol formation might be related to the presence of these clusters according to a concerted mechanism. Furthermore, the observation of large amounts of acetates by temperature-programmed hydrogenation, not detected in hydrocarbon selective catalysts, suggests that they may play a role in ethanol synthesis.     

Proliferative effects of synthetic peptides from β-lactoglobulin and α-lactalbumin on murine splenocytes

Eleven peptides, selected on the basis of physicochemical characteristics and their theoretical release from β-lactoglobulin (β-Lg) and α-lactalbumin (α-La) by trypsin or chymotrypsin, were chemically synthesised to evaluate their immunomodulating properties. Murine splenocyte proliferation in the absence and presence of mitogen and different peptide concentrations were measured after 72–96 h incubations. β-Lg f78–83 had no effect on proliferation; β-Lg f15–20, f55–60, f84–91, f92–105, f139–148, f142–148 and α-La f10–16 stimulated proliferation to different extents; β-Lg f1–8, f102–105 and α-La f104–108 showed a cytotoxic effect. Regression analysis revealed the relationship of positive charge, hydrophobicity and length to the stimulatory proliferative effect. β-Lg f15–20, f55–60 and f139–148 also induced various inhibiting and/or stimulating effects on cytokine secretion. The results confirm that peptides releasable by digestive enzymes from α-La and β-Lg have the potential to influence the specific immune response through the modulation of splenocyte proliferation and cytokine secretion.     

High-resolution full-field optical coherence tomography with a Linnik microscope

We describe an original microscope for high-resolution optical coherence tomography applications. Our system is based on a Linnik interference microscope with high-numerical-aperture objectives. Lock-in detection of the interference signal is achieved in parallel on a CCD by use of a photoelastic birefringence modulator and full-field stroboscopic illumination with an infrared LED. Transverse cross-section (en-face, or XY) images can be obtained in real time with better than 1-microm axial (Z) resolution and 0.5-microm transverse (XY) resolution. A sensitivity of approximately 80 dB is reached at a 1-image/s acquisition rate, which allows tomography in scattering media such as biological tissues.     

Component composition preserving behavioral contracts based on communication traces

This paper investigates the compositional properties of reusable software components defined with explicit dependencies and behavioural contracts expressing rely-guarantee specifications in the form of communication traces. In this setting, connection of components through their matching ports is indeed compositional and yields a new component or composite that respects its constituents’ contracts. Thus the behaviour of the composite is computed from the behaviours of its constituents and is known to conform to the contracts without any new proof.     

The epitopes targeted by the rheumatoid arthritis-associated antifilaggrin autoantibodies are posttranslationally generated on various sites of (pro)filaggrin by deimination of arginine residues

Antifilaggrin autoantibodies (AFA) are a population of IgG autoantibodies associated to rheumatoid arthritis (RA), which includes the so-called "antikeratin" Abs and antiperinuclear factor. AFA are the most specific serological markers of RA. We previously showed that they recognize human epidermal filaggrin and other profilaggrin-related proteins of various epithelial tissues. Here, we report further characterization of the protein Ags and epitopes targeted by AFA. All the Ags that exhibit numerous neutral/ acidic isoelectric variants were immunochemically demonstrated to be deiminated proteins. In vitro deimination of a recombinant human filaggrin by a peptidylarginine deiminase generated AFA epitopes on the protein. Moreover, two of three filaggrin-derived synthetic peptides with a citrulline in the central position were specifically and widely recognized by AFA affinity-purified from a series of RA sera. These results indicate that citrulline residues are constitutive of the AFA epitopes, but only in the context of specific amino acid sequences of filaggrin. In competition experiments, the two peptides abolished the AFA reactivity of RA sera, showing that they present major AFA epitopes. These data should help in the identification of a putative deiminated AFA-inducing or cross-reactive articular autoantigen and provide new insights into the pathogenesis of RA. They could also open the way toward specific immunosuppressive and/or preventive therapy of RA.     

Théorie de la propagation dans les fibres multimodales déformées aléatoirement. II. Application aux fibres à saut d’indice

The paraxial ray theory applied to randomly distorted multimode optical fibers in Part I is applied here to step-index fibers with microbending. This technique provides a stationary microbending loss equal to 6,27 λ/Δ dB/unit length, where γ denotes the spectral density of the curvature process and Δthe relative index change. The product of the square of the bandwidth improvement factor by the loss in dB is equal to 0,74 dB. The role of the distortion on bandwidth is illustrated for a 10 km long fiber, excited by a lambertian source.