平面扇形可倾瓦气体推力轴承的优化设计

气体动压轴承在小型透平机械中有着诱人的应用前景．本文介绍了平面扇形可倾瓦气体推力轴承的工作特性计算及其参数优化的方法．利用自编的软件取得了瓦块最佳直径比和支承位置等参数的优化结果，并且在微机上实现了该种轴承的优化设计．     

基于小波分析的捷联式惯导系统的初始对准方法研究

对于光纤陀螺捷联式惯导系统，提出了一种新的初始对准方法，采用小波分析方法撮初始对准的有用信号；用二位置法确定初始方向余统矩阵，同时对光纤陀螺的常值漂移和加速度计零偏置进行标定。仿真结果表明了这种方法的有效性。     

SAW滤波器简化衍射频响的计算方法

提出了由一个变迹ＩＤＴ叉指换能器和一个均匀ＩＤＴ组成的ＳＡＷ滤波器简化衍射频响的计算方法，即将均匀ＩＤＴ简化成单根指计算其衍射频响。该方法与未简化衍射频响的计算方法相比，计算量大为减小，前者约为后者的（Ｎ为均匀ＩＤＴ的指对数）。并给出了一个实例，用未简化与简化方法分别计算了其衍射频响，结果表明，两者符合得较好。     

压力对Fe－29wt％Ni合金超细微粒特性的影响

利用蒸发冷凝法，制备了不同平均粒径的Ｆｅ－２９ｗｔ％Ｎｉ合金超细微粒。在不同压强下，将超细微粒压制成片。随压强增大，马氏体体积分数和比饱和磁化强度σｓ明显增大，而矫顽力Ｈｃ呈线性下降。压力效应与平均粒径ｄ大小密切相关     

Water‐soluble/dispersible cationic pressure‐sensitive adhesives. I. Adhesives from solution polymerization

Pressure‐sensitive adhesives (PSAs) have long been a problem as sticky contaminants for paper recycling mills. The main problem associated with such stickies is that the PSAs in the waste papers deposit on the felts, press rolls, and drying cylinders of paper machines, and this creates problems with paper formation, reducing the paper quality and paper machine runnability. The annual cost of stickies to the U.S. paper industry is estimated to be about $600,000,000–650,000,000. To solve this problem, a series of cationic water‐soluble/dispersible PSAs have been synthesized by the free‐radical solution polymerization of butyl acrylate and [3‐(methacryloylamino)propyl]trimethylammonium chloride in ethanol. The PSA end‐use properties, repulpability in paper recycling, and the effects on the properties of recycled paper products have been studied. The cationic PSAs can be dissolved or dispersed in water if the cationic charge density in the PSA backbone is controlled, and so they do not deposit as stickies during recycling and papermaking processes. Because the PSAs are cationically charged, they can easily be removed from the papermaking system by adsorption onto the negatively charged fibers and fine surfaces. Furthermore, the adsorbed colloidal or dissolved PSAs have little effect on the final paper properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1624–1630, 2003     

横波速度各向异性初步探讨：—多波勘探资料的应用

在纵波、SH 型横波资料处理和解释过程中,我们发现四川 HBC 地区地下介质普遍存在方向各向异性。当横波通过方向各向异性介质时,分裂成两个波:一个波的偏振方向与裂缝平行,叫快横波;另一个波的偏振方向与裂缝走向垂直,叫慢横波。采用相应的观测和处理方法,便可获得快横波和慢横波剖面。根据同一界面的快、慢横波的旅行时可以求得各向异性系数。同样,还可以利用 SH 波与转换波的速度比求取各向异性系数。各向异性系数的大小,反映了裂缝的发育程度。如果野外作了 X、Y 分量观测,室内又作了坐标旋转处理,那么,就可以进一步确定裂缝带的方向。如果未作上述工作,也可以根据构造线走向,大致确定裂缝带的发育方向。     

非平稳ARMA信号自校正滤波器及其应用

本文处理带白色观测噪声的非平稳ARMA信号估计问题.应用状态空间方法和现代时 间序列分析方法[1],基于ARMA新息模型,提出了非平稳ARMA信号自校正滤波器,推广了 Hagander和Wittenmafk的结果[2],并给出了在雷达跟踪系统和检测数据数字滤波方面的应 用.仿真结果说明了本文结果的实用性和有效性.     

Thermal Shock Behavior of Porous Silicon Carbide Ceramics

Using the water-quenching technique, the thermal shock behavior of porous silicon carbide (SiC) ceramics was evaluated as a function of quenching temperature, quenching cycles, and specimen thickness. It is shown that the residual strength of the quenched specimens decreases gradually with increases in the quenching temperature and specimen thickness. Moreover, it was found that the fracture strength of the quenched specimens was not affected by the increase of quenching cycles. This suggests a potential advantage of porous SiC ceramics for cyclic thermal-shock applications.     

2.5-dimensional VLSI system integration

The excessive interconnection delay and fast increasing development cost, as well as complexity of the single-chip integration of different technologies, are likely to become the major stumbling blocks for the success of monolithic system-on-chips. To address the above problems, this paper investigates a new VLSI integration paradigm, the so-called 2.5-dimensional (2.5-D) integration scheme. Using this scheme, a VLSI system is implemented as a three-dimensional stacking of monolithic chips. A cost analysis framework was developed to justify the 2.5-D integration scheme from an economic point of view. Enabling technologies for the new integration scheme are also reviewed.     

SIS热塑性嵌段共聚物的生产方法及应用

概述了SIS热塑性弹性体的合成方法以及国内外SIS生产和应用情况。综述了SIS在胶黏剂应用上的特点以及以茂金属为催化剂的SIS新低压加氢工艺的进展和国内SIS发展现状，提出了大力开发C5资源促进我国SIS产业发展的建议。