Local Therapies and Modulation of Tumor Surrounding Stroma in Malignant Pleural Mesothelioma: A Translational Approach

Malignant Pleural Mesothelioma (MPM) is a rare and aggressive neoplasm of the pleural mesothelium, mainly associated with asbestos exposure and still lacking effective therapies. Modern targeted biological strategies that have revolutionized the therapy of other solid tumors have not had success so far in the MPM. Combination immunotherapy might achieve better results over chemotherapy alone, but there is still a need for more effective therapeutic approaches. Based on the peculiar disease features of MPM, several strategies for local therapeutic delivery have been developed over the past years. The common rationale of these approaches is: (i) to reduce the risk of drug inactivation before reaching the target tumor cells; (ii) to increase the concentration of active drugs in the tumor micro-environment and their bioavailability; (iii) to reduce toxic effects on normal, non-transformed cells, because of much lower drug doses than those used for systemic chemotherapy. The complex interactions between drugs and the local immune-inflammatory micro-environment modulate the subsequent clinical response. In this perspective, the main interest is currently addressed to the development of local drug delivery platforms, both cell therapy and engineered nanotools. We here propose a review aimed at deep investigation of the biologic effects of the current local therapies for MPM, including cell therapies, and the mechanisms of interaction with the tumor micro-environment.     

In vitro antimicrobial properties of silver–polysaccharide coatings on porous fiber-reinforced composites for bone implants

Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver–polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.     

Thermochromic composite fibres containing liquid crystals formed via melt extrusion

A three-layered composite fibre has been generated via a modified wire-coating melt co-extrusion process. The continuous fibre consists of a thermochromic liquid crystalline (TLC) layer encapsulated between a transparent polypropylene outer sheath and a black polyether ether ketone inner core. The fibres exhibit clear thermochromic behaviour consistent with the behaviour of unincorporated TLCs, and have been formed into a textile. The presence of the black inner core was found to be the key for the clear retention of colour within the fibres against both white and black backgrounds. The temperature-sensitive fibres and textiles can be applied to a variety of thermal mapping applications, such as in the medical and engineering fields, due to the tunable nature of TLCs.     

Chronic fondaparinux use in a hemodialysis patient with heparin‐induced thrombocytopenia type II and extracorporeal circuit thrombosis—A case report and review of the literature

Heparin‐induced thrombocytopenia (HIT) is a potentially life‐threatening condition that can develop after exposure to unfractionated or low–molecular‐weight heparins. Treatment options appear to be limited in patients on concurrent intermittent hemodialysis. We report the case of an 88‐year‐old man newly initiated on high‐flux hemodialysis who developed HIT and extracorporeal circuit thrombosis after 3 weeks of exposure to unfractionated heparin. Our patient was successfully treated with fondaparinux 2.5 mg subcutaneously three times per week and citrate during dialysis sessions. Antifactor Xa levels were measured on several occasions while receiving fondaparinux.     

Transparent Plasmonic Nanowire Electrodes via Self‐Organised Ion Beam Nanopatterning

A self‐organised approach for the synthesis of transparent metal nanowire arrays is based on defocused ion beam sputtering. The nanowire arrays, supported on low‐cost dielectric substrates (glass slides), feature a dual functionality: they exhibit anisotropic conductivity, with sheet resistances which are reduced in comparison to those of transparent conductive oxides, and additionally they support localised plasmon resonances. The latter represents an attractive feature in view of plasmon enhanced photon harvesting applications, in which the nanostructured metal electrodes are employed as an alternative to conventional transparent conductive oxides.     

Experimental study of dry reforming of biogas in a tubular anode-supported solid oxide fuel cell

The performance of a tubular Ni/YSZ anode supported SOFC directly fed by an anaerobic digestion simulated biogas, with an extra addition of carbon dioxide to operate in conservative operating conditions to avoid coking on the anode support, was investigated. The fuel cell has been tested at a fixed oven temperature of 800 °C and under biogas/CO₂ mixtures with different volumetric ratios, fuel utilization (FU) and current densities. Polarization curves and performance maps were obtained to better understand the influence of the investigated operational parameters on the cell behavior. Furthermore, since the tubular geometry enables an easy separation of the anode and cathode exhaust gases, the anode off-gas has been collected and monitored through a gas-chromatograph under open circuit voltage to investigate on the catalytic behavior of a Ni-based state-of-the-art anode. For corresponding operative conditions, performances of the cell for biogas/CO₂ 1/1.5 (i.e. CH₄/CO₂ 30/70) and 1/2 (i.e. CH₄/CO₂ 24/76) were at least 2% and 4% lower than the case 1/1 (i.e. CH₄/CO₂ 20/80), respectively. The highest efficiency of 43.4% was reached at 17.5 A and FU = 70%.     

Base effects on electrochemical oxidation of indoline

The electrooxidation of indoline was studied as the first step in exploring its utility as a model liquid hydrogen carrier. Electrochemical oxidation of indoline in the presence of nitrogen-containing bases resulted in a cathodic shift in the onset of the oxidation. A linear correlation was found between the pK_a of the base and the magnitude of the cathodic shift of indoline oxidation. A hydrogen bonding complex model is proposed to account for this effect, and ¹H NMR spectroscopy and cyclic voltammetry experiments were conducted to support this proposed mechanism.     

Model for the final decarburisation of the steel bath through a self-bubbling effect

The decarburisation in the basic oxygen furnace is certainly the chemical process ruling the conversion of pig iron into steel and for the production of high deep drawability steel s. At the end of conversion, the steelmakers have often to blow again to achieve the targeted low values of carbon concentration. This further blowing process implies a productivity loss, even it is not strictly needed because the self-bubbling of the metal bath due to the CO formation can allow setting the carbon concentration within the required chemical range. Actually, due to the high temperatures and oxygen activity at the end of the blowing process, the decarburisation process keeps moving up to the equilibrium. The present study describes and validates a chemical-physical model based on thermodynamic and kinetic aspects that allow the steelmakers to forecast when exploiting the self-bubbling phenomenon avoiding the re-blow, increasing the productivity and the refractories working life.     

Heat Transfer in Water-Based SiC and TiO2 Nanofluids

The article reports the results of heat transfer experimental tests on water-based TiO₂ (9 wt%) and SiC (3, 6, 9 wt%) nanofluids. Measurements were performed in a two-loop test rig for immediate comparison of the thermal performances of the nanofluid with the base fluid. The convective heat transfer is evaluated in a circular pipe heated with uniform heat flux (from 20 to 240 kW/m²) and flow regimes from laminar to turbulent. Tests have been performed to compare the heat transfer of nanofluids and water at the same velocity (from 0.7 to 1.6 m/s) or Reynolds number (from 300 to 6000), and they have also been compared with values calculated from some of the most widely used correlations. The analysis of the experimental data shows a strong dependence on the parameter used, while both the nanofluid and water data have the same agreement with the calculated values. Nanofluids were manufactured through a two-step procedure: laser synthesis of nanoparticles followed by dispersion in water.     

Energy saving in existing buildings by an intelligent use of interoperable ICTs

In this paper, we report a methodology, developed in the context of Smart Energy Efficient Middleware for Public Spaces European Project, aimed at exploiting ICT monitoring and control services to reduce energy usage and CO₂ footprint in existing buildings. The approach does not require significant construction work as it is based on commercial-off-the-shelf devices and, where present, it exploits and integrates existing building management systems with new sensors and actuator networks. To make this possible, the proposed approach leverages upon the following main contributions: (a) to develop an integrated building automation and control system, (b) to implement a middleware for the energy-efficient buildings domain, (c) to provide a multi-dimensional building information modelling-based visualisation, and (d) to raise people’s awareness about energy efficiency. The research approach adopted in the project started with the selection, as case studies, of representative test and reference rooms in modern and historical buildings chosen for having different requirements and constraints in term of sensing and control technologies. Then, according to the features of the selected rooms, the strategies to reduce the energy consumptions were defined, taking into account the potential savings related to lighting, heating, ventilation, and air conditioning (HVAC) systems and other device loads (PC, printers, etc.). The strategies include both the control of building services and devices and the monitoring of environmental conditions and energy consumption. In the paper, the energy savings estimated through simulation, for both HVAC and lighting, are presented to highlight the potential of the designed system. After the implementation of the system in the demonstrator, results will be compared with the monitored data.