面向小功率驱动应用的新型SOI驱动器和SmartPACK／Smart PIM模块

本文基于SOI技术,开发了一款新型的600V/0.3A 6-pack IGBT/MOSFET驱动器芯片.此款名为6ED003L06-F的芯片集成了三相电平转换、门极驱动和电路保护等诸多特性，在缩小芯片尺寸的同时也提高了性能，例如抗反相瞬态电压的鲁棒性等。另外，本文还利用该SOI驱动芯片开发了SmartPACK/SmartPIM系列新型IPM模块，该模块在一块基于DCB层的底板上集成了SOI驱动器，600V IGBT3和自举功能，并且无须支承板。这种IPM可对应6A-12A的额定电流，同时具有结构紧凑、成本低廉、操作简单等优点，适用于各类小功率驱动特别是消费类驱动应用。     

Analysis of supercritical carbon dioxide extracts from cones and leaves of a Humulus lupulus L cultivar

Extracts obtained by supercritical carbon dioxide extraction of cones and leaves of hop (Humulus lupulus L) at different combinations of temperature and pressure were analysed for their α- and β-acids and volatiles, using HPLC and GC respectively. The yield and composition of the mixtures of bitter compounds from the cones were largely influenced by the temperature and pressure applied during the extraction. Bitter compounds could not be detected in the extracts from the leaves. The most important volatile components identified were β-myrcene, β-caryophyllene and α-humulene. The extraction parameters also influenced the composition of the mixture of volatiles from the cones and leaves, 40°C and 20.0 MPa being optimum for the extraction of both bitter compounds and volatiles, which are thought to be important for the aroma of beer.     

Performance monitoring in optical networks using asynchronously acquired samples with nonideal sampling systems and intersymbol interference

This paper presents a study on the influence of nonideal sampling in asynchronous Q-factor monitoring. An overestimation of the Q-factor of signals impaired with optical noise may occur if the averaging effects due to nonideal sampling affect only the noise component of the monitored signal. It is shown that this problem can be rectified using a correction factor, dependent only on the receiver parameters. This allows reasonable Q-factor estimates using sampling systems with aperture times close to the monitored signal bit period. Nonideal sampling may also affect the signal component of the monitored signal. For such cases, a novel and accurate technique is presented to estimate the Q factor using asynchronous histograms, which takes into account changes in the shape of the monitored signal due to averaging effects. Numerical simulations are used to evaluate the proposed technique achieving Q-factor estimates within a 14% error margin, independently of the sampling aperture for the considered range. Distortion affecting the signal due to the transmission system can also be handled by the new technique presented in this paper. It is verified that the impact of intersymbol interference due to chromatic dispersion or electrical filtering in the receiver on the performance of the system is well reflected by the estimated Q factor.     

Deep learning-based hybrid reconstruction algorithm for fibre instance segmentation from 3D x-ray tomographic images

3D x-ray tomography is a powerful scanning technique used for generating images of complex fibre structures. A novel machine-learning algorithm to identify and separate individual fibres using 3D images is proposed in this article. The developed four-step hybrid 3D fibre segmentation algorithm involves deep-learning aided semantic segmentation that slices 3D images to create 2D images for fibre extraction, elliptical contour estimation combined with the marker-controlled watershed algorithm for separating fibres from the background area, identifying individual fibres through 3D reconstruction, and, lastly, the 3D object refining approach based on outlier object detection and replacement. The proposed methodology is implemented on a real-time sample of nylon fibre bundle under compression and its 3D x-ray image volume to validate the performance. The results show its superior performance compared to off-the-shelf image processing algorithms in terms of precision, that is, with a validation accuracy greater than 90%, and efficiency, that is, preventing the need for a huge data set and reducing the complexity.     

IMPROVEMENT OF THE BITTERNESS OF HOPS: PHOTOREACTIONS OF ALPHA ACIDS

The phototransformation of the α-acids (humulone) of hop resins has been studied in order to improve their bitter properties and to establish the optimal experimental conditions.     

Experimental and theoretical analysis of friction stir welding of Al–Cu joints

This paper presents a study of friction stir welding of aluminium and copper using experimental work and theoretical modelling. The 5083-H116 aluminium alloy and pure copper were successfully friction-stir-welded by offsetting the pin to the aluminium side and controlling the FSW parameters. A theoretical analysis is presented along with key findings. The process temperatures are predicted analytically using the inverse heat transfer method and correlated with experimental measurements. The temperature distribution in the immediate surroundings of the weld zone is investigated together with the microstructures and mechanical properties of the joint. This was supported by a finite element analysis using COMSOL Multiphysics. In this study, two rotational speeds were used and a range of offsets was applied to the pin. The microstructure analysis of the joints was undertaken. This revealed some particles of Cu inclusion in the nugget zone. The energy dispersive spectroscopy showed a higher diffusion rate of aluminium towards the interface while copper maintained a straight base line.     

Inhibition of Bacterial Pathogens in Medium and on Spinach Leaf Surfaces using Plant‐Derived Antimicrobials Loaded in Surfactant Micelles

Encapsulation of hydrophobic plant essential oil components (EOC) into surfactant micelles can assist the decontamination of fresh produce surfaces from bacterial pathogens during postharvest washing. Loading of eugenol and carvacrol into surfactant micelles of polysorbate 20 (Tween 20), Surfynol® 485W, sodium dodecyl sulfate (SDS), and CytoGuard® LA 20 (CG20) was determined by identification of the EOC/surfactant‐specific maximum additive concentration (MAC). Rheological behavior of dilute EOC‐containing micelles was then tested to determine micelle tolerance to shearing. Antimicrobial efficacy of EOC micelles against Escherichia coli O157:H7 and Salmonella enterica serotype Saintpaul was first evaluated by the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Pathogen‐inoculated spinach was treated with eugenol‐containing micelles applied via spraying or immersion methods. SDS micelles produced the highest MACs for EOCs, while Tween 20 loaded the lowest amount of EOCs. Micelles demonstrated Newtonian behavior in response to shearing. SDS and CG20‐derived micelles containing EOCs produced the lowest MICs and MBCs for pathogens. E. coli O157:H7 and S. Saintpaul were reduced on spinach surfaces by application of eugenol micelles, though no differences in numbers of surviving pathogens were observed when methods of antimicrobial micelle application (spraying, immersion) was compared (P ≥ 0.05). Data suggest eugenol in SDS and CG20 micelles may be useful for produce surface decontamination from bacterial pathogens during postharvest washing.