Delineation of Groundwater Potential Zones in Arid Region of India—A Remote Sensing and GIS Approach

The present research is an attempt to find out the groundwater potential zones within an arid region of India supported by the scientific investigation of lithology, geomorphology, geohydrological characterization of geological formations and their interrelationship. Thematic layers of drainage, lithology, geomorphology, lineaments, slope, soil, digital elevation model, rainfall, landuse/land cover and well inventory have been generated by using ancillary data, digital satellite image, water level data of 90 observation wells for last 11?years (2000?C2010), litholog data along with ground truthing. The groundwater potential zones have been classified into five categories like very poor, poor, moderate, good and excellent. The potential zones were obtained by weighted overlay combination using the spatial analyst tool in ArcGIS 9.2. During weighted overlay analysis, the ranking was given for each individual parameter of each thematic map and weights were assigned according to their influence such as lithology (20?%), geomorphology (15?%), lineament density (15?%), drainage density (15?%), soil (10?%), slope (10?%), rainfall (5?%), land use and land cover (5?%) and digital elevation model (DEM) (5?%) and it was found that the potential zones in terms of very poor, poor, moderate, good and excellent zones covered 13.7?%, 42.8?%, 27.3?%, 10.8% and 5.4% respectively of the total area. The result also has been validated by yield data collected from existing sources and it confirms that the higher yield categories are falling within excellent groundwater potential zones where yield ranges from 23 to 40.3?l/s and lower values ranging from 8.1 to 10.6?l/s are falling within poor groundwater potential zones.     

Porous Titania Thin Films Grown by Anodic Oxidation for Hydrogen Sensors

Porous titanium dioxide (Titania) thin films were grown by anodic oxidation using high purity (99.7%) titanium foil in a dilute sulphuric acid (1 M) medium. The anodization process was carried out for 30 minutes with 20 mA/cm² and 50 mA/cm² current densities. The samples were characterized by XRD, SEM, and AFM techniques. It was found that the grown porous titania films were less sensitive to 500 ppm hydrogen in air ambient below 300°C; however, the sensitivity and response behavior of the film at 300°C are very much dependent on the growth conditions. Particularly, the films grown at current density 50 mA/cm² and 1 M acid concentration exhibited the lowest response time of 151 sec at 300°C.     

Towards the Development of a New Iron Age

Steel in its various forms is the most widely utilized metallic alloy and comprises over 80 % by weight of all metallic alloys in industrial use.^[1] The development of steel microstructures is based on manipulation of a very specific solid/solid state transformation called an eutectoid transformation (i.e. γ_austenite → α_ferrite+ Fe₃C_cementite). The control of this transformation is the primary factor resulting in wide variety of microstructures and resulting properties found in commercial steel alloys. However, the full benefit of its main constituent, iron has never been realized. Based on the metallic bonding in iron, the theoretical tensile strength has been calculated to be 13.2 GPa but ultra high strength steels, even today, only achieve maximum tensile strength levels from 1 to 1.5 GPa. Thus, our modern technological society has been established utilizing approximately only ～ 10 % strength level of iron. Here we demonstrate that a high level of strength (6.2 GPa) and strength to weight ratio of 8.3 × 10⁴/m³ may be obtained in iron‐based alloys by their solidification into metallic glasses, as well as, by employing another solid state transformation called glass devitrification.     

Catalytic oxidation of carbon monoxide over radiolytically prepared Pt nanoparticles supported on glass

Platinum nanoparticles have been prepared by radiolytic and chemical methods in the presence of stabilizer gelatin and SiO₂ nanoparticles. The formation of Pt nanoparticles was confirmed using UV-vis absorption spectroscopy and transmission electron microscopy (TEM). The prepared particles were coated on the inner walls of the tubular pyrex reactor and tested for their catalytic activity for oxidation of CO. It was observed that Pt nanoparticles prepared in the presence of a stabilizer (gelatin) showed a higher tendency to adhere to the inner walls of the pyrex reactor as compared to that prepared in the presence of silica nanoparticles. The catalyst was found to be active at ≥150 °C giving CO₂. Chemically reduced Pt nanoparticles stabilized on silica nanoparticles gave ∼7% CO conversion per hour. However, radiolytically prepared Pt nanoparticles stabilized by gelatin gave ∼10% conversion per hour. Catalytic activity of radiolytically prepared platinum catalyst, coated on the inner walls of the reactor, was evaluated as a function of CO concentration and reaction temperature. The rate of reaction increased with increase in reaction temperature and the activation energy for the reaction was found to be ∼108.8 kJ mol⁻¹. The rate of CO₂ formation was almost constant (∼1.5 × 10⁻⁴ mol dm⁻³ h⁻¹) at constant O₂ concentration (6.5 × 10⁻³ mol dm⁻³) with increase in CO concentration from 2 × 10⁻⁴ mol dm⁻³ to 3.25 × 10⁻³ mol dm⁻³. The data indicate that catalytic oxidation of CO takes place by Eley-Rideal mechanism.     

A software platform for testing intrusion detection systems

Intrusion detection systems monitor system activities to identify unauthorized use, misuse, or abuse. IDSs offer a defense when your system's vulnerabilities are exploited and do so without requiring you to replace expensive equipment. The steady growth in research on intrusion detection systems has created a demand for tools and methods to test their effectiveness. The authors have developed a software platform that both simulates intrusions and supports their systematic methodology for IDS testing     

Liquid convection effects on the pushing-engulfment transition of insoluble particles by a solidifying interface: Part I. Analytical calculation of the lift forces

During the solidification of a liquid containing insoluble particles, the particles can be instantaneously engulfed, or continuously pushed, or pushed and subsequently engulfed. A critical velocity for the pushing-engulfment transition is observed experimentally. Most models proposed to date ignore the complications arising from the liquid convection ahead of the solid-liquid interface. They simply solve the balance between the attractive drag force exercised by the liquid on the particle and the repulsive interfacial force. This work is an effort to calculate analytically the lift forces (Saffman and Magnus forces) under certain assumptions regarding the nature of fluid flow ahead of the solid/liquid interface. This makes possible the quantitative evaluation of the three experimentally observed regimes occurring during particle-interface interaction: (1) at low convection—no effect on the critical velocity for the particle engulfment transition; (2) at intermediate convection—increased critical velocity; (3) at high convection—no particle-interface interaction. The model was applied to evaluate the gravity level required for microgravity experimental work on particle pushing where the effect of liquid convection during solidification is negligible. This is necessary to validate existing theoretical models that do not take into account fluid flow parallel to the solidification interface.     

The role of cytotoxic chemotherapy in the management of aggressive and malignant pituitary tumors

Pituitary tumors are mostly benign lesions, although 5-35% are locally invasive. A small number exhibit a more aggressive course, infiltrating dura, bone and sinuses, and are designated highly aggressive. However, the presence of metastases separate from the pituitary in the central nervous system or at a distance is necessary to designate pituitary tumors as carcinomas, i.e. truly malignant. When conventional therapeutic modalities fail, systemic chemotherapy remains the last option. We report seven such patients, three with highly aggressive and four with malignant pituitary tumors (n=4) four women; median age, 32 yr; range, 23-48 yr), who received one or more courses of chemotherapy with lomustine and 5-fluorouracil (median, two courses; range, one to six courses). Three patients with systemic metastatic disease had a shorter survival (median, 5 months; range, 1-14 months) than the one patient with central nervous system metastases alone (10 yr). A patient with an aggressive nonmetastatic prolactinoma who initially responded to chemotherapy died from another nondisease-associated cause. Two patients, one with an aggressive and one with a metastatic tumor, achieved symptomatic improvement with a median duration of 6 months. A hormonal reduction greater than 50% was observed in two of seven patients; only one patient who had an aggressive tumor obtained an objective tumor response. The median survival from the time of initiation of chemotherapy in patients with malignant tumors ranged from 3-65 months. Two patients with malignant tumors developed disease progression while receiving chemotherapy; no patient with extracranial metastases showed a response. Treatment was well tolerated, with minimal individual side-effects. Three patients with no response to initial treatment received different chemotherapeutic regimens with no additional response. All patients with metastatic malignant tumors eventually died. Treatment with cytotoxic chemotherapy is noncurative, and current experience is limited. Until another more specific form of treatment is available, chemotherapy may still be of some value in patients with highly aggressive and malignant pituitary tumors, at least in achieving a temporary remission or delay in progression. The combination of lomustine/5-fluorouracil proved easy to administer with minimal toxicity, although the response rate was only 14%. Until a more specific treatment is found, an optimal chemotherapeutic regimen needs to be established.     

Samarium Ion-Doped Maghemite Nanoparticles: Synthesis,Microstructural, Optical,and Magnetic Characterizations

Journal of Superconductivity and Novel Magnetism - This paper reports the effects of rare-earth Sm3+ ion substitution on structural, optical, electronic, and magnetic responses of maghemite...     

Effects of cooking methods and chemical tenderizers on survival of Escherichia coli O157:H7 in ground beef patties

This study evaluated chemical tenderizers and cooking methods to inactivate Escherichia coli O157:H7 in ground beef patties (model system for non-intact beef). Ground beef was inoculated with E. coli O157:H7 and mixed with (i) nothing (control), (ii) calcium chloride (CC) and flavoring agents (FA), (iii) CC, FA, and acetic acid (AA), (iv) sodium chloride (SC), sodium tripolyphosphate (ST), and potassium lactate (PL), and (v) the combination of SC, ST, PL, and AA. Patties were stored in aerobic or vacuum bags at − 20, 4, and 12 °C. Samples were grilled, broiled, or pan-fried to 60 or 65 °C. Total bacterial and E. coli O157:H7 populations remained unchanged during storage. Broiling was more effective in reducing E. coli O157:H7 than grilling and pan-frying, and acidified tenderizers reduced E. coli O157:H7 more than non-acidified tenderizers in broiling. Higher reductions were observed at 65 °C than 60 °C in broiled and grilled samples. These results indicate that acidified tenderizers and broiling may be useful in non-intact beef safety.     

Silicon Nitride–Silicon Carbide Nancocomposites Fabricated by Electric-Field-Assisted Sintering

Starting with Si-C-N(-O) amorphous powders, and using the electric field assisted sintering (EFAS) technique, silicon nitride/silicon carbide nanocomposites were fabricated with yttria as an additive. It was found that the material could be sintered in a relatively short time (10 min at 1600°C) to satisfactory densities (2.96–3.09 g/cm³) using 1–8 wt% yttria. With decreasing yttria content, the ratio of SiC to Si₃N₄ increased, whereas the grain size decreased from ∼150 nm to as small as 38 nm. This offers an attractive way to make nano-nanocomposites of silicon nitride and silicon carbide.