Growth of part-through thickness fatigue cracks in sheet polymethylmethacrylate

Fatigue growth data has been obtained for part-through thickness cracks in sheet specimens of polymethylmethacrylate subjected to cyclic tension. Statistical techniques are used to examine the usefulness of linear elastic fracture mechanics for correlating this part-through thickness crack growth data with throughthickness data published previously.     

Preparation and characterization of low-halogen and nonhalgoen fire-resistant low-smoke (FRLS) cable sheathing compound from blends of functionalized polyolefins and PVC

An attempt is made to develop a novel series of cable sheathing compounds with variation in chlorine content and sufficient fire retardance and unique low-smoke characteristics. These are prepared by blending PVC and functionalized polyolefins in different compositions. PE and EPDM have been functionalized by grafting dibutyl maleate (DBM) using DCP as initiator. FRLS compounds made from PVC-functionalized polyolefin blends possess the special characteristics of low-smoke, low-acid-gas generation, increased fire retardance, and improved volume resistivity, which are much better in comparison with a typical PVC sheathing compound. Thermoplastic elastomer (TPE) based nonhalogen FRLS compounds are also reported. The mechanisms for grafting, polymer-polymer and polymer-filler interactions have been presented.     

Anisotropy of X-ray structural parameters of the three phase model in cellulose I

Anisotropy of X-ray structural parameters of the three phase model proposed by Mitra and Mukherjee (ref.2), has been investigated in the case of cellulose fibres of ramie, hemp and jute. The structural parameters have been determined separately from each of the observable equatorial reflections. It has been found that the parameter degree of crystallinity as defined in the model is in fact anisotropic at least in the samples studied. The parameter degree of paracrystallinity introduced by Mitra and Mukherjee was also found to be anisotropic. Several important correlations between the structural parameters have been drawn. It has been observed, in agreement with the recent findings of Hosemann and Balta Calleja (ref.10) that the greater the paracrystalline distortion, the smaller the ‘paracrystallite size’.     

Pixel rearrangement based statistical restoration scheme reducing embedding noise

In this paper, a block based steganographic algorithm has been proposed where a sequence of secret bits are embedded into a set of pixels by rearranging the pixel locations. This algorithm has been devised as an improvement over existing statistical restoration based algorithms in order to reduce the additive noise which occurs due to embedding. It is shown that the proposed scheme substantially reduces the additive noise compared to existing statistical restoration based schemes.     

Microstructure and properties of flame sprayed tungsten carbide coatings

This article reports on feasibility experiments carried out with oxy-acetylene spray system with various oxygen to fuel ratios using two different tungsten carbide powders and powder feeding methods, to evaluate the newly developed fused WC, synthesised by transferred arc thermal plasma method. Transferred arc thermal plasma method is more economical and less energy intensive than the conventional arc method and results in a fused carbide powder with higher hardness. The microstructure and phase composition of powders and coatings were analysed by optical and scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Carbon content of the powders and coatings were determined to study the decarburisation of the material during spraying process. Coatings were also characterised by their hardness and abrasive wear. The effects of metallurgical transformation and phase content are related to wear performance. The results demonstrate that the powders exhibit various degree of phase transformation during the spray process depending on the type of powder, powder feeding and spray parameters. The carbon loss during the spray process in excess of 45% resulted in reduced hardness and wear resistance of the coatings. Coatings with high amount of WC and W₂C along with FeW₃C showed higher wear resistance. Thus, coatings of high wear resistance can be produced using fused tungsten carbide powder with WC and W₂C phases, which can be economically synthesised by thermal plasma transferred arc method.     

Femtocell based green power consumption methods for mobile network

This paper presents the analytical models of power consumption in macrocell, microcell, picocell and femtocell based networks. Five case studies are presented in this paper where macrocells, microcells, picocells and femtocells are deployed based on the number of mobile subscribers present in a region, mobile user traffic in that region and the area of the region where cellular coverage has to be provided. A comparative study is performed between the power consumption by the base stations in each of these five cases and that of the only macrocell based network. The simulation results demonstrate that using each of these five strategies the power consumption by the base stations can be minimized than that of only macrocell based network. Based on the power consumption by the base stations in these five schemes, we have categorized the networks into five classes, A, B, C, D and E, each of which contains cells of different types to reduce power consumption to achieve green cellular network.     

Distributed probabilistic inferencing in sensor networks using variational approximation

This paper considers the problem of distributed inferencing in a sensor network. It particularly explores the probabilistic inferencing problem in the context of a distributed Boltzmann machine-based framework for monitoring the network. The paper offers a variational mean-field approach to develop communication-efficient local algorithm for variational inferencing in distributed environments (VIDE). It compares the performance of the proposed approximate variational technique with respect to the exact and centralized techniques. It shows that the VIDE offers a much more communication-efficient solution at very little cost in terms of the accuracy. It also offers experimental results in order to substantiate the scalability of the proposed algorithm.     

Approximation Bounds for Minimum Information Loss Microaggregation

The NP-hard microaggregation problem seeks a partition of data points into groups of minimum specified size k, so as to minimize the sum of the squared euclidean distances of every point to its group's centroid. One recent heuristic provides an O(k³) guarantee for this objective function and an O(k²) guarantee for a version of the problem that seeks to minimize the sum of the distances of the points to its group's centroid. This paper establishes approximation bounds for another microaggregation heuristic, providing better approximation guarantees of O(k²) for the squared distance measure and O(k) for the distance measure.