Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

Biodegradable biocomposites from poly(butylene adipate‐co‐terephthalate) and miscanthus: Preparation,compatibilization, and performance evaluation

Miscanthus fibers reinforced biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) matrix‐based biocomposites were produced by melt processing. The performances of the produced PBAT/miscanthus composites were evaluated by means of mechanical, thermal, and morphological analysis. Compared to neat PBAT, the flexural strength, flexural modulus, storage modulus, and tensile modulus were increased after the addition of miscanthus fibers into the PBAT matrix. These improvements were attributed to the strong reinforcing effect of miscanthus fibers. The polarity difference between the PBAT matrix and the miscanthus fibers leads to weak interaction between the phases in the resulting composites. This weak interaction was evidenced in the impact strength and tensile strength of the uncompatibilized PBAT composites. Therefore, maleic anhydride (MAH)‐grafted PBAT was prepared as compatibilizer by melt free radical grafting reaction. The MAH grafting on the PBAT was confirmed by Fourier transform infrared spectroscopy. The interfacial bonding between the miscanthus fibers and PBAT was improved with the addition of 5 wt % of MAH‐grafted PBAT (MAH‐g‐PBAT) compatibilizer. The improved interaction between the PBAT and the miscanthus fiber was corroborated with mechanical and morphological properties. The compatibilized PBAT composite with 40 wt % miscanthus fibers exhibited an average heat deflection temperature of 81 °C, notched Izod impact strength of 184 J/m, tensile strength of 19.4 MPa, and flexural strength of 22 MPa. From the scanning electron microscopy analysis, better interaction between the components can be observed in the compatibilized composites, which contribute to enhanced mechanical properties. Overall, the addition of miscanthus fibers into a PBAT matrix showed a significant benefit in terms of economic competitiveness and functional performances. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45448.     

Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts

We report a novel and very handful strategy for the functionalization of diamond nanoparticles (NDs), based on the ultrasound-assisted grafting of aryl groups from the electroless reduction of diazonium salts. For this study, 4-nitrobenzenediazonium salt was used as a model molecule and the reaction was investigated in neutral and acidic aqueous media. Spectroscopic evidence for the successful attachment of aryl groups to nanodiamonds (NDs) was given by IR and XPS which clearly detect characteristic NO₂ peaks. Moreover, the absence of any peaks from the ⁺N≡N group in the IR spectra is a clear indication of the chemical reduction of the parent diazonium salt at the surface of NDs. This spontaneous chemical modification of NDs by aryl diazonium salts was confined to the surface of the ND particles; indeed, XRD measurements have shown that the crystalline structure of the bulk of the particles was unaffected. It opens up new possibilities towards the control of the surface chemical composition of NDs using simple protocols operated in very soft conditions, i.e. in water at room temperature. It shows conclusively that the chemistry toolbox of experts interested in nanodiamonds should contain aryl diazonium salts, given their versatility in forming active platforms.     

Study of pyro-carbon coated alumina kernel using mixed contrast transfer based X-ray phase retrieval technique

We have used the contrast transfer function based X-ray phase retrieval technique for phase retrieval studies on a two-component system. Pyro-carbon coated alumina matrix was chosen as a two-component system for these studies. Simulations as well as experimental results are presented. This paper shows that X-ray phase contrast along with phase retrieval can become an alternative tool for non-destructive characterization of these materials. We have also attempted to retrieve the spatial distribution of the projected thickness map of the two different elements.     

Performance assessment of hybrid composite friction materials based on flyash–rock fibre combination

Friction composites based on several combinations of flyash and inorganic mineral rock fibres such as lapinus™ fibre were fabricated, characterised and tribo-evaluated. The tribo-performance in terms of their friction-fade and friction-recovery behaviour has been rigorously evaluated while synchronously taking into account of the in situ braking induced temperature rise in the disc at the braking interface on a Krauss friction testing machine following pulse velocity wave (PVW) 3212 norms as per the Economic Commission for Europe (ECE) regulations. The fade behaviour has been observed to be highly dependent on the combination of flyash–lapinus fibre e.g. fade remained maximum (45%) in the composite with the highest amount of lapinus fibre content and lowest amount of flyash whereas the frictional fluctuations in terms of μ_max − μ_min has been observed to be higher in case of low flyash–high lapinus fibre combination. The recovery response seemed unaffected by the disparity of ingredients and remained consistently stable within the range of 112 ± 2%. The analysis of friction and wear performance has revealed that flyash along with lapinus fibre provide thermo-mechanical stability and overall mechanical integrity to the system causing reduction in friction-fade whereas wear was found to be more recovery-controlled and less fade controlled. Worn surface morphology investigation using SEM has been carried out which has revealed that the interplay of flyash–lapinus combination and topographical attributes vis-a-vis dynamics of contact patches (formation–destruction) largely influence the friction and wear performance of such composites.     

The relationship between laboratory-based outcome measures and mortality in end-stage renal disease: A systematic review

Despite data that traditional laboratory-based outcome measures in dialysis are improving over time, population-based data indicate that mortality rates are not improving in parallel. With increased focus on performance measures based on laboratory-based outcomes (e.g., hematocrit, albumin, and parathyroid hormone), less emphasis has been placed on other markers, some of which may be stronger predictors of mortality. We performed a systematic review to interpret the predictive value of laboratory-based outcome measures in dialysis. We identified studies with data regarding the predictive value of laboratory-based outcomes for mortality in dialysis. We calculated the sample size-weighted pooled relative risk of death with dichotomized "high" vs. "low" levels of each measure. We rank-ordered predictors by scaling the pooled relative risk of each measure by its pooled standard deviation. There were 5171 titles, of which 128 (representing 44 laboratory-based outcomes) were selected. Nine were significantly associated with mortality, in order of decreasing scaled effect size: (1) tumor necrosis factor-α, (2) hematocrit, (3) interleukin-6, (4) troponin T, (5) Kt/V_urea, (6) prealbumin, (7) urea reduction ratio, (8) serum albumin, and (9) C-reactive protein. Other oft-cited measures such as calcium phosphate product and parathyroid hormone were not significantly associated with mortality in pooled analysis. Quality improvement efforts to improve traditional laboratory-based outcomes in end-stage renal disease are necessary, but likely insufficient, to improve overall mortality in dialysis. Renewed consideration of cardiovascular, inflammatory, and nutritional markers that are especially strong predictors of mortality may have important implications for risk stratification and targeted therapeutic interventions.     

Exploiting sparsity in pricing routines for the capacitated arc routing problem

The capacitated arc routing problem (CARP) is a well-known and fundamental vehicle routing problem. A promising exact solution approach to the CARP is to model it as a set covering problem and solve it via branch-cut-and-price. The bottleneck in this approach is the pricing (column generation) routine. In this paper, we note that most CARP instances arising in practical applications are defined on sparse graphs. We show how to exploit this sparsity to yield faster pricing routines. Extensive computational results are given.     

Acoustics

Head of the Acoustics Department at the Building Research Centre, Cairo, Professor Adel Elmallawany and colleagues describe their work on testing wood particle panels for acoustical uses as a porous material, non‐perforated panel and cavity resonator     

Experimental Study of a Dead-time Measurement Method Based on Time-interval Photon Statistics

Abstract

In this paper a dead-time measurement method consisting of measurement of the Fourier transform of the time-interval probability of a sinusoidal intensity is experimentally studied. It is found that dead time can be obtained with a small error for a wide variety of experimental conditions.     

Scheduling on a bottleneck station: A comprehensive cost model and heuristic algorithms

This paper presents a mathematical model for scheduling a single processor system to minimize aggregate operations cost consisting of inventory holding cost, opportunity cost due to the delay in realization of revenue, inflationary spiral effect, and the time value of money on costs yet to be incurred. We propose a number of heuristic algorithms for solving the model and provide extensive numerical experiments. Computational results are reported.