Poly(ethylene terephthalate)-based nanocomposite films as greenhouse covering material: Environmental sustainability,mechanical durability,and thermal stability

The environmental sustainability, mechanical durability, and thermal stability of the poly(ethylene terephthalate) (PET)-based nanocomposite films compared with pure PET were evaluated. The samples were obtained by incorporating 2 wt% of TiO₂, SiO₂, ZnO nanoparticles (NPs), and an equal mixture of NPs in polymer by melt-mixing in a twin-screw extruder. The mechanical properties and hardness of samples were determined by the tensile and the atomic force microscopy-based nanoindentation tests. The melting, crystallization, and glass transition temperatures of samples were studied by dynamic mechanical thermal analysis and differential scanning calorimetry. The effects of compatibility, dispersity, and hydrophobicity of NPs on the surface morphology, crystallinity, and thermomechanical properties of nanocomposites were studied. The interaction of SiO₂ NPs with PET chains had a promising effect on the surface morphology, high elastic modulus, dispersibility, crystallinity, and thermostability of the sample. The mixing of ZnO and TiO₂ NPs improved the UV-blocking effects, and photostability, while the SiO₂ and TiO₂ NPs maintained the thermal properties of the film against UV radiation. The resulting film could be a good candidate as a greenhouse covering material due to its suitable photosynthetically active radiation transmittance.     

Hybrid polymer matrix composite (UHMWPE-HPMC) as solid particle erosion resistant coating for sharp pipe elbows using numerical simulation and experimental analysis

A hybrid polymer matrix composite coating, resistant to solid particle erosion inside sharp elbows, consisting interlocking chains of molecules with the ability to deflect the surface impact stress and to uniformly distribute stresses along the hard-ceramic reinforcement mixture surface was developed. Formulated mixture of ceramic reinforcement particles mixtures (alumina, tungsten carbide, and silicon carbide) with polymer coupling agents; to increase adhesion to the metal surface, led to 600–700 HVN in ternary and 500–550 HVN in binary mixtures. This behavior coincides with high shear strength of 70–76 MPa, Young's and shear modulus of 8.86 and 13.4 GPa in ternary 15%Al₂O₃-5%WC-10%SiC, respectively. The low erosion weight loss of 0.1% and small coefficient of friction near 0.18 indicates the significant wear resistance of the ternary sample. The electron microscopic micrographs determined the dense smooth coating surfaces with adhesive interfaces with the substrate.     

Investigation of Creep Feed Grinding Parameters and Heat treatment Effects on the Nickel-base Superalloys

The Nickel base Superalloys are the most famous complicated and useable of Superalloys to make hot zone components of the gas turbines. The complicated dimensional tolerances, specially at the root of the blade show importance of grinding processes at the production of blades root. The prediction of the effect of machining parameters on the soundness of component surface strengthening for reaching to a suitable surface finishing and avoiding from crack formation at the work part during machining operation often is not easy and feasible so needs to more industrial investigation.This research is about frame 5 blade designed by GE and made from Superalloy IN738LC has been investigated. The formation of a plastically deformed and heat affected zone during grinding of Superalloy IN738LC with a high depth of cut but slow work speed (creep feed grinding) was investigated. Parameters such as work speed, depth of cut and radial dressing speed have been considered as variables and their effects have been studied. During experimental performed, the voltage and current of motor measured and power and special energy calculated.Some samples heat-treated (of the 1176℃ for 1 hr under neutral argon gas and cooling rate of 15℃/min up to 537℃ and then air cooling) to study grains recrystallization. Other samples have been created from the roots of blades and then coated by Nickel to measure boundary layer micro-hardness. The results show that increasing work speed leads to increasing the use power. Increasing the depth of cut, by increasing material removal rate, and the radial dressing speed, by decreasing power, lead to decreasing special energy. The temperature created by grinding lead to decreasing plastic deformation and boundary layer formation. When the radial dressing speed changes from 1 to 0.6μm/rev and other parameters are kept unchanged the roughness of surface increases and the special energy decreases. Sufficient dressing is very essential in limiting the width of the molten zone to few micrometers. As a result, it was found that local melting at contact spots to be a rather common mechanism during grinding of superalloys, lead to so-called white layers which can easily be observed on metallographic cross sections.     

Electrokinetic power generation of non-Newtonian fluids in a finite length microchannel

In order to examine the effects of the fluid type as the electrolyte solvent on the efficiency of electrokinetic energy conversion, a comparative numerical study among three different fluid types of a transient electrokinetic flow through a single circular finite length microchannel has been conducted. The system was initially at an equilibrium non-flow state, and a step change in flow was applied and the calculation proceeding until steady state was achieved. The analysis was based on non-dimensional transport governing equations that were scaled using Debye length as the characteristic length scale and diffusion time as characteristic time scale. The fluid types considered were shear thinning, Newtonian, and shear thickening, and a power law modeled them with the scaled flow behavior index having values of 0.2, 1.0, and 1.8. In order to isolate the electrokinetic effects of the different relationships between the shear strain rate and shear stress, the flow consistency index was adjusted so that in all the cases the flow rate and total pressure drop matched that of water at 25 °C. All other fluid and interfacial properties were the same for all cases. The key observational difference between the various fluid types was that their different axial velocity profile acted on essential the same free charge density profiles. Consequently, the convection current density (i.e., the radial distribution of charge being advected along the channel) was strongly affected by the fluid type. Integration of this quantity to calculate the convection current showed that for the particular fluid properties chosen the shear thinning fluid was 20 % higher than the Newtonian fluid, while the shear thickening fluid was only 4 % lower than the Newtonian fluid. Combined with the effects, these different currents have on the streaming potential, the shear thinning fluid was 50 % more effective in converting flow work to electrical work than the Newtonian fluid, while the shear thickening fluid was only 16 % lower than the Newtonian fluid.     

QG/GA: a stochastic search for Progol

Most search techniques within ILP require the evaluation of a large number of inconsistent clauses. However, acceptable clauses typically need to be consistent, and are only found at the “fringe” of the search space. A search approach is presented, based on a novel algorithm called QG (Quick Generalization). QG carries out a random-restart stochastic bottom-up search which efficiently generates a consistent clause on the fringe of the refinement graph search without needing to explore the graph in detail. We use a Genetic Algorithm (GA) to evolve and re-combine clauses generated by QG. In this QG/GA setting, QG is used to seed a population of clauses processed by the GA. Experiments with QG/GA indicate that this approach can be more efficient than standard refinement-graph searches, while generating similar or better solutions. Editors: Ramon Otero, Simon Colton.     

The Lattice-Boltzmann Method on Optimal Sampling Lattices

In this paper, we extend the single relaxation time Lattice-Boltzmann Method (LBM) to the 3D body-centered cubic (BCC) lattice. We show that the D3bQ15 lattice defined by a 15 neighborhood connectivity of the BCC lattice is not only capable of more accurately discretizing the velocity space of the continuous Boltzmann equation as compared to the D3Q15 Cartesian lattice, it also achieves a comparable spatial discretization with 30 percent less samples. We validate the accuracy of our proposed lattice by investigating its performance on the 3D lid-driven cavity flow problem and show that the D3bQ15 lattice offers significant cost savings while maintaining a comparable accuracy. We demonstrate the efficiency of our method and the impact on graphics and visualization techniques via the application of line-integral convolution on 2D slices as well as the extraction of streamlines of the 3D flow. We further study the benefits of our proposed lattice by applying it to the problem of simulating smoke and show that the D3bQ15 lattice yields more detail and turbulence at a reduced computational cost.     

Business process management with the user requirements notation

A number of recent initiatives in both academia and industry have sought to achieve improvements in e-businesses through the utilization of Business Process Management (BPM) methodologies and tools. However there are still some inadequacies that need to be addressed when it comes to achieving alignment between business goals and business processes. The User Requirements Notation (URN), recently standardized by ITU-T, has some unique features and capabilities beyond what is available in other notations that can help address alignment issues. In this paper, a URN-based framework and its supporting toolset are introduced which provide business process monitoring and performance management capabilities integrated across the BPM lifecycle. The framework extends the URN notation with Key Performance Indicators (KPIs) and other concepts to measure and align processes and goals. An example process for controlling access to a healthcare data warehouse is used to illustrate and evaluate the framework. Early results indicate the feasibility of the approach.     

A single-phase p-type ac–ac converter with reduced components count and high boost factor

This paper proposes a new single-phase direct step-up ac–ac converter by modifying the p-type impedance source. It provides a high boost factor as well as high efficiency, while only six parts are required to design it, involving just two bidirectional power switches. A safe commutation method has been applied to power switches to make the converter snubber-free and high efficient. Input and output harmonic filters are no longer required since input and output currents variate continuously with small ripple and low total harmonic distortion (THD). The proposed topology only modulates the output voltage amplitude, not the phase and frequency, so the output frequency is identical to the input frequency and constant. Thus, it can be utilized in step-up conversion applications, like inductive power transmission from low ac voltage sources. Input and output have the same ground, which is a good protective feature. In this paper, the operating principle of the converter is demonstrated. Experimental results have been represented to evaluate the performance of the converter. For this purpose, an experimental prototype has been fabricated. Results are investigated and compared with other previous step-up ac–ac converters. Results confirm the theory, operating principle, and performance of the converter.     

Belief Decay or Persistence? A Mixed-method Study on Belief Movement Over Time

When individuals encounter new information (data), that information is incorporated with their existing beliefs (prior) to form a new belief (posterior) in a process referred to as belief updating. While most studies on rational belief updating in visual data analysis elicit beliefs immediately after data is shown, we posit that there may be critical movement in an individual's beliefs when elicited immediately after data is shown v. after a temporal delay (e.g., due to forgetfulness or weak incorporation of the data). Our paper investigates the hypothesis that posterior beliefs elicited after a time interval will “decay” back towards the prior beliefs compared to the posterior beliefs elicited immediately after new data is presented. In this study, we recruit 101 participants to complete three tasks where beliefs are elicited immediately after seeing new data and again after a brief distractor task. We conduct (1) a quantitative analysis of the results to understand if there are any systematic differences in beliefs elicited immediately after seeing new data or after a distractor task and (2) a qualitative analysis of participants' reflections on the reasons for their belief update. While we find no statistically significant global trends across the participants beliefs elicited immediately v. after the delay, the qualitative analysis provides rich insight into the reasons for an individual's belief movement across 9 prototypical scenarios, which includes (i) decay of beliefs as a result of either forgetting the information shown or strongly held prior beliefs, (ii) strengthening of confidence in updated beliefs by positively integrating the new data and (iii) maintaining a consistently updated belief over time, among others. These results can guide subsequent experiments to disambiguate when and by what mechanism new data is truly incorporated into one's belief system.