Refinement of inverter model considering dead‐time for performance improvement in predictive instantaneous current control

Model predictive instantaneous‐current control (MPIC), which was proposed in our earlier works, enables us to achieve better instantaneous current control using mathematical models of an inverter and permanent magnet synchronous motors (PMSMs). However, dead‐time to avoid short breakdown in the inverter is not usually considered in a general inverter model. Such an unmodeled part in the inverter model prevents accurate prediction of current evolution in motor systems based on the model predictive control. Therefore, in this paper, we analyze current response resulting from the dead‐time in the MPIC, and propose a refined inverter model considering the dead‐time so that control performance is improved. The effectiveness of the proposed method is verified through simulation and experiments. © 2013 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Application of microalgae hydrolysate as a fermentation medium for microbial production of 2-pyrone 4,6-dicarboxylic acid

1. Download high-res image (309KB)
2. Download full-size image

     

In situ time-resolved X-ray diffraction of tobermorite formation in autoclaved aerated concrete: Influence of silica source reactivity and Al addition

The hydrothermal formation of tobermorite during the processing of autoclaved aerated concrete was investigated by in situ X-ray diffraction (XRD) analysis. High-energy X-rays from a synchrotron radiation source in combination with a newly developed autoclave cell and a photon-counting pixel array detector were used.To investigate the effects of the silica source, reactive quartz from chert and less-reactive quartz from quartz sand were used as starting materials. The effect of Al addition on tobermorite formation was also studied. In all cases, C-S-H, hydroxylellestadite and katoite were clearly observed as intermediates.Acceleration of tobermorite formation by Al addition was clearly observed. However, Al addition did not affect the dissolution rate of quartz. Two pathways, via C-S-H and katoite, were also observed in the Al-containing system. These results suggest that the structure of initially formed C-S-H is important for the subsequent tobermorite formation reactions.     

Control of carbon incorporation in AlAs grown by atomic layer epitaxy using variously orientated substrates

We demonstrate a method for successfully controlling carbon incorporation in AlAs layers grown by atomic layer epitaxy (ALE) using various GaAs substrates with different orientations. The number of alkyl radicals attached to an Al atom at the surface, which is a main factor in carbon incorporation, can be intentionally controlled by changing substrate orientation. We found that the carbon incorporation in ALE-AlAs using the (3 1 1)B surface is 2 x 10¹⁷,cm^-3, which is the lowest value ever reported for ALE-AlAs that satisfies one-monolayer self-limiting growth conditions.     

Correction and evaluation of the effect due to parasitic motion on primary accelerometer calibration

Primary accelerometer calibration is carried out under the assumption that a vibration exciter gives a rectilinear motion to an accelerometer to be calibrated. However practical vibration given by the vibration exciter includes parasitic motion such as transverse, rocking, and bending motion. Such parasitic motion would give two serious effects on primary calibration results, transverse motion effect and vibration distribution effect. Transverse motion effect is caused by an inner product of the vectors of both transverse motion and transverse sensitivity. On the other hand, the vibration distribution effect is caused by relative motion between a sensing point of accelerometer and a spot sensed by the interferometer. As these effects have close interaction between parasitic motion and measuring instruments, it would be very difficult to evaluate them by measuring independently each component.     

Identification of characterization factor for power system oscillation based on multiple synchronized phasor measurements

Electric power systems in Japan are composed of remote and distributed location of generators and loads mainly concentrated in large‐demand areas. The structures having long‐distance transmission tend to produce heavy power flow with increasing electric power demand. In addition, some independent power producers (IPP) and power producer and suppliers (PPS) are participating in the power generation business, which makes power system dynamics more complex. However, there was little observation as a whole power system. In this paper the authors present a global monitoring system of power system dynamics by using the synchronized phasor measurement of demand‐side outlets. Phasor Measurement Units (PMU) are synchronized based on the global positioning system (GPS). The purpose of this paper is to show oscillation characteristics and methods for processing original data obtained from PMU after certain power system disturbances triggered by accidents. This analysis resulted in the observation of the lowest and the second lowest frequency mode. The derivation of eigenvalue with the two‐degree‐of‐freedom model brings a monitoring of two oscillation modes. Signal processing based on wavelet analysis and simulation studies to illustrate the obtained phenomena are presented in detail. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 163(3): 10– 18, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20316     

Relative pitch perception in Japanese monkeys (Macaca fuscata).

To investigate whether monkeys perceive relative pitch, the author trained 3 Japanese monkeys (Macaca fuscata) to detect changes from rising to falling contours of 3-tone sequences. Tone sequences were presented serially with transposition, so monkeys were urged to attend to cues other than the absolute frequency of a component tone. Results from probe tests with novel sequences showed that monkeys discriminated by the relative pitch when the frequency ranges of sequences were within the training range, showing a similar tendency as birds in previous studies (e.g., S. H. Hulse, J. Cynx, & J. Humpal, 1984). (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Differential expression of alpha 1(IV), alpha 2(IV), alpha 5(IV) and alpha 6(IV) collagen chains in the basement membrane of basal cell carcinoma

Type IV collagen, the major component of basement membrane, consists primarily of alpha 1(IV) and alpha 2(IV) chains. Recently, other types of collagen IV chains, i.e. alpha 3(IV), alpha 4(IV), alpha 5(IV) and alpha 6(IV) chains, have been identified by protein chemistry and molecular cloning. We have examined the diversity of the assembly of alpha (IV) chains of the basement membrane surrounding tumour nests of basal cell carcinomas, in tissues from 11 patients, by immunohistochemical analysis using specific monoclonal antibodies to six alpha (IV) chain. The immunostaining profile of each chain differed with respect to the histological subtypes of basal cell carcinoma. In the morphea-like subtype, which was more invasive, alpha 1(IV) and alpha 2(IV) chains were discontinuously stained, and alpha 5(IV) and alpha 6(IV) chains were entirely absent. However, in the superficial subtype, which was non-aggressive, alpha 1(IV), alpha 2(IV), alpha 5(IV) and alpha 6(IV) chains were well stained compared with the other subtypes of basal cell carcinoma. In addition, in the solid subtype, which showed slow growth and ulceration, alpha 1(IV) and alpha 2(IV) chains were continuously stained, and alpha 5(IV) and alpha 6(IV) chains were discontinuous or absent. The assembly of alpha 5(IV) and alpha 6(IV) chains into the basement membrane was inhibited in the solid and morphea subtypes of BCC. This differential expression of type IV collagen chains seems to be associated with the invasive potential of basal cell carcinoma.