An extended hesitant fuzzy set using SWARA-MULTIMOORA approach to adapt online education for the control of the pandemic spread of COVID-19 in higher education institutions

The world has been challenged since late 2019 by COVID-19. Higher education institutions have faced various challenges in adapting online education to control the pandemic spread of COVID-19. The present study aims to conduct a survey study through the interview and scrutinizing the literature to find the key challenges. Subsequently, an integrated MCDM framework, including Stepwise Weight Assessment Ratio Analysis (SWARA) and Multiple Objective Optimization based on Ratio Analysis plus Full Multiplicative Form (MULTIMOORA), is developed. The SWARA procedure is applied to the analysis and assesses the challenges to adapt the online education during the COVID-19 outbreak, and the MULTIMOORA approach is utilized to rank the higher education institutions on hesitant fuzzy sets. Further, an illustrative case study is considered to express the proposed idea's feasibility and efficacy in real-world decision-making. Finally, the obtained result is compared with other existing approaches, confirming the proposed framework's strength and steadiness. The identified challenges were systemic, pedagogical, and psychological challenges, while the analysis results found that the pedagogical challenges, including the lack of experience and student engagement, were the main essential challenges to adapting online education in higher education institutions during the COVID-19 outbreak.

     

Nanomembrane‐Based,Thermal‐Transport Biosensor for Living Cells

Knowledge of materials' thermal‐transport properties, conductivity and diffusivity, is crucial for several applications within areas of biology, material science and engineering. Specifically, a microsized, flexible, biologically integrated thermal transport sensor is beneficial to a plethora of applications, ranging across plants physiological ecology and thermal imaging and treatment of cancerous cells, to thermal dissipation in flexible semiconductors and thermoelectrics. Living cells pose extra challenges, due to their small volumes and irregular curvilinear shapes. Here a novel approach of simultaneously measuring thermal conductivity and diffusivity of different materials and its applicability to single cells is demonstrated. This technique is based on increasing phonon‐boundary‐scattering rate in nanomembranes, having extremely low flexural rigidities, to induce a considerable spectral dependence of the bandgap‐emission over excitation‐laser intensity. It is demonstrated that once in contact with organic or inorganic materials, the nanomembranes' emission spectrally shift based on the material's thermal diffusivity and conductivity. This NM‐based technique is further applied to differentiate between different types and subtypes of cancer cells, based on their thermal‐transport properties. It is anticipated that this novel technique to enable an efficient single‐cell thermal targeting, allow better modeling of cellular thermal distribution and enable novel diagnostic techniques based on variations of single‐cell thermal‐transport properties.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Experimental investigations into electric discharge grinding and ultrasonic vibration-assisted electric discharge grinding of Inconel 601

The paper presents experimental investigations into electric discharge grinding (EDG) and ultrasonic vibration-assisted electric discharge grinding (UVAEDG) of Inconel 601. The process parameters selected for both processes were duty cycle, discharge current, pulse on time, grinding wheel speed, work speed, and speed ratio to study their influence on responses like surface roughness (R_a) and material removal rate (MRR). It was found that duty cycle, wheel speed, work speed, discharge current, speed ratio, and pulse duration significantly influenced MRR and R_a. It was inferred that MRR increased with increase in duty cycle, wheel speed, current, work speed, and pulse duration in both EDG and UVAEDG processes. It was also inferred that R_a increased with rise in duty factor, pulse on time, and discharge current in EDG and UVAEDG processes.     

Nanocrystalline Nd–Fe–B Anisotropic Magnets by Flash Spark Plasma Sintering

Flash spark plasma sintering (flash SPS) is an attractive method to obtain Nd–Fe–B magnets with anisotropic magnetic properties when starting from melt-spun powders. Compared to the benchmark processing route via hot pressing with subsequent die upsetting, flash SPS promises electroplasticity as an additional deformation mechanism and reduced tool wear, while maximizing magnetic properties by tailoring the microstructure—fully dense and high texture. A detailed parameter study is conducted to understand the influence of Flash SPS parameters on the densification and magnetic properties of commercial MQU-F powder. It is revealed that the presintering conditions and preheating temperature before applying the power pulse play a major role for tailoring grain size and texture in the case of hot deformation via Flash SPS. Detailed microstructure and magnetic domain evaluation disclose the texture enhancement with increasing flash SPS temperature at the expense of coercivity. The best compromise between remanence and coercivity (1.37 T and 1195 kA m⁻¹, respectively) is achieved through a combination of presintering at 500 °C for 120 s and preheating temperature of 600 °C, resulting in a magnet with energy product (BH)_max of 350 kJm⁻³. These findings show the potential of flash SPS to obtain fully dense anisotropic nanocrystalline magnets with high magnetic performance.     

Studies on microbridges of superconducting YBCO thin film

Critical current densities of the superconducting Y-Ba-Cu-O (YBCO) films have been observed to decrease with the increase of power of microwave radiation. Presence of Josephson type of junctions in the microbridges has been established from the microwave irradiation and magnetic field studies. BCS energy gap parameter (2/kT _c ) has been calculated from thedI/dV characteristics and found to be 3.7 at 13 K.     

An integrated intelligent computing model for the interpretation of EMG based neuromuscular diseases

Intelligent computing system (ICS) and knowledge-based system (KBS) have been widely used in the detection and interpretation of EMG (electromyography) based diseases. Heuristic-based detection methods of EMG parameters for a particular disease have also been reported in the literature but little effort has been made by researchers to combine rule-based reasoning (RBR) and case-based reasoning of KBS, and ANN (artificial neural nets) of ICS. Integrating the methods in KBS and ICS improves the computational and reasoning efficiency of the problem-solving strategy. We have developed an integrated model of CBR and RBR for generating cases, and ANN for matching cases for the interpretation and diagnosis of neuromuscular diseases. We have hierarchically structured the neuromuscular diseases in terms of their physio-pyscho (muscular, cognitive and psychological) parameters and EMG based parameters (amplitude, duration, phase etc.). Cumulative confidence factor is computed at different node from lowest to highest level of hierarchal structure in the process of diagnosis of the neuromuscular diseases. The diseases considered are Duchenne muscular dystrophy, Polymyostits, Endocrine myopathy, Metabolic myopathy, Neuropathy, Poliomyletis and Myasthenia gravis. The basic objective of this work is to develop an integrated model of RBR, CBR and ANN in which RBR is used to hierarchically correlate the sign and symptom of the disease and also to compute cumulative confidence factor (CCF) of the diseases. CBR is used for diagnosing the neuromuscular diseases and to find the relative importance of sign and symptoms of a diseases to other diseases and ANN is used for matching process in CBR.     

A password based authentication scheme for wireless multimedia systems

In this digital era, where Internet of Things (IoT) is increasing day by day, use of resource constrained devices is also increasing. Indeed, the features such as low cost, less maintenance, more adaptive to hostile environment, etc. make the wireless multimedia devices to be the best choice as the resource constrained devices. For the security, the end user device requires to establish the session key with the server before transferring the data. Mobile is one of the device having more and more usage as wireless multimedia device in recent years. In 2013, Li et al. proposed an efficient scheme for the wireless mobile communications and claimed it to be secure against various attacks. Recently, Shen et al. claimed that the scheme of Li et al. is still vulnerable to the privileged insider attack, the stolen verifier attack and finally proposed a scheme to withstand the mentioned and other attacks. However, in this paper we claim that the scheme of Shen et al. is still susceptible to the user anonymity, the session specific temporary information attack and the replay attack. In addition, Shen et al.’s scheme requires more time due to many operations. Further, we propose an efficient scheme that is secure against various known attacks and due to reduced time complexity our scheme is a preferred choice for the wireless mobile networks and hence for wireless multimedia systems.     

Semantic web reasoners and languages

Semantic web reasoners and languages enable the semantic web to function. Some of the latest reasoning models developed in the last few years are: DLP, FaCT, RACER, Pellet, MSPASS, CEL, Cerebra Engine, QuOnto, KAON2, HermiT and others. Some software tools such as Protégé, Jena and others also have been developed, which provide inferencing as well as ontology development and management environments. These reasoners usually differ in their inference procedures, supporting logic, completeness of reasoning, expressiveness and implementation languages. Various semantic web languages with increasing expressive power continue to be developed for describing web services. We survey the some of the more recent languages like OWL-S (Ontology Web Language-Schema), WSML (Web Service Modeling Language), SWRL (Semantic Web Rule Language) and others that have been tested in early use. We also survey semantic web reasoners and their relationship to these languages.