Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Chlorophyll and plankton of the Gulf coastal waters of Saudi Arabia bordering a desalination plant

As on land, plants are the real producers in the sea, and on them depend all marine living resources and the basic sustainability of ecosystems. Primary production is performed by chlorophyll-bearing plants ranging from the tiny phytoplankton to the giant kelps through the process ofphotosynthesis. Zooplankton play an important role as secondary producers, and together with phytoplankton they support the vast assemblages of marine food chain with all their diversity and complexity. Data on chlorophyll pigments, phytoplankton and zooplankton are regarded as a sound basis for environmental appraisal of ecosystems. This paper presents a set of data collected from the Saudi Arabian coastal waters near the desalination plants in AI-Jubail. Materials were collected from six different sites covering the intake and discharge zones during cruises carried out in 1997-1998. Analyses of chlorophyll pigments were made using the spectrophotometric method. Plankton samples were collected using a Nansen plankton net with a mesh size of 75 μ and analyzed following standard procedures. Chlorophyll a, b, c and phaeophytin are the most commonly occurring pigments in seawater. Their concentrations showed wide fluctuation. The phytoplankton community was composed of 35 genera representing the Diatoms, Dinoflagellates and blue- green algae. Zooplankton were composed ofProtozoa, Coelenterata, Ctenophora, Aschelminthes, Annelida, Mollusca, Arthropoda, Echinodermata and Chordata. Arthropoda, represented by Cladocera, Copepoda and Crustacean larvae, formed the largest group followed by Chordata. The distribution of phyto- and zooplankton was examined and discussed on a seasonal, annual and inter-annual basis. In terms of species, overall species composition was not affected by plant discharge. The study brings out a greater understanding of the changes experienced by biotic communities as a result of impingement, entrainment and entrapment consequent to water passage through the plant structures. The study reflects the ecological relationships that the phytoplankton and the zooplankton of the region possess with respect to intake and discharge. Further, the study has brought to light a very redeeming feature of the ecosystem to sustain its productivity and planktonic abundance. It was observed that seawater temperature, conductivity and total suspended solids did not act as limiting factors. Besides throwing much light on the little known biological aspects of desalination sites, the data provided constitute a significant addition to the knowledge base of marine living resources in an industrial zone of Gulf coastal waters.     

Wear of graphite anodes during electrolysis of add sulphate solutions

Graphite electrodes were prepared by mixing calcined coke and coal tar pitch. They were pressed under 250 kg cm^–2 and heat treated up to 2800° C. Rectangles measuring 70 mm x 40 mm x 8 mm were anodically polarized under galvanostatic and potentiostatic conditions. Electrolyses were conducted at 10–50 mA cm^–2 for periods ranging from 10–120 hours in Na₂SO₄ solutions acidified with sulphuric acid to various pH values. The wear of graphite anodes increased with decreasing bath temperature, increasing acid concentration, decreasing pH of the electrolyte and increasing current density. A model is suggested which assumes that corrosion takes place via the formation of a lamellar crystal compound with the formula (C ₈ ⁰ O)(OH)₃HSO ₄ ^– ·2H₂SO₄.The compound is unstable at higher temperatures when corrosion is effected by oxidation of graphite by atomic oxygen. The formation of the carbon ions was found to be a necessary precondition for the formation of the complex.     

Effect of scraped-surface tube cooler temperatures on the physical properties of palm oil margarine

The effects of scraped-surface tube cooler temperatures on the isothermal solid fat content (SFC) of palm oil margarine during processing and on margarine consistency (yield value, g/cm²), SFC, and polymorphic changes in storage were studied. SFC was measured in the mixing tank after leaving the tube cooler and the pin worker. The SFC at the tube cooler exit was proportional to the amount of cooling; a higher SFC was produced by more extreme cooling treatment. The SFC of all margarines were reduced in the pin worker, and the reduction was related to the initial SFC profile of palm oil. Margarine samples were stored at 28°C for 28 d and tested daily. Margarine processed at 25°C in the tube cooler had the highest consistency and the least change in SFC, but by the second week crystals had transformed into the β form. Uniform product consistency and SFC were observed in margarines processed at 20 and 15°C. These margarines retained the β′ crystal form for 3 and 4 wk, respectively. The best palm oil margarine was obtained with a tube cooler temperature of 15°C and a residence time of 1.8 min.     

Progress and challenges in sustainability,compatibility, and production of eco-composites: A state-of-art review

Owing to economic and environmental benefits, new generations of materials/commodities follow “from waste to wealth” strategy. Recently, there has been a huge upsurge in research on the development of eco-composites using recycled plastic polymers and agro-residues because the eco-composites satisfy the stringent environment regulations and are cost-effective. Herein, we present a detailed review on the potential use of several types of natural fillers as an efficient reinforcement for recycled plastic polymers. In particular, the characterization of different categories of eco-composites according to their morphological, physical, thermal, and mechanical properties is extensively reviewed and their results are analyzed, compared, and highlighted. Furthermore, a framework to produce functional eco-composites, which includes functionalization of ingredients, critical issues on microstructural parameters, processing, and fabrication methods, is outlined and supported with sufficient data from the literature. Finally, the review outlines the emerging challenges and future prospects of eco-composites to be addressed by interested researchers to bridge the gap between research and commercialization of such a class of material. Overall, the acquired knowledge will guide researchers, scientists, and manufacturers to plan, select, and develop various forms of eco-composites with enhanced properties and optimized production processes.     

What can possibly go wrong? Anticipatory work in space operations

This paper explores how different forms of anticipatory work contribute to reliability in high-risk space operations. It is based on ethnographic field work, participant observation and interviews supplemented with video recordings from a control room responsible for operating a microgravity greenhouse at the International Space Station (ISS). Drawing on examples from different stages of a biological experiment on the ISS, we demonstrate how engineers, researchers and technicians work to anticipate and proactively mitigate possible problems. Space research is expensive and risky. The experiments are planned over the course of many years by a globally distributed network of organizations. Owing to the inaccessibility of the ISS, every trivial detail that could possibly cause a problem is subject to scrutiny. We discuss what we label anticipatory work: practices constituted of an entanglement of cognitive, social and technical elements involved in anticipating and proactively mitigating everything that might go wrong. We show how the nature of anticipatory work changes between planning and the operational phases of an experiment. In the planning phase, operators inscribe their anticipation into technology and procedures. In the operational phase, we show how troubleshooting involves the ability to look ahead in the evolving temporal trajectory of the ISS operations and to juggle pre-planned fixes along these trajectories. A key objective of this paper is to illustrate how anticipation is shared between humans and different forms of technology. Moreover, it illustrates the importance of including considerations of temporality in safety and reliability research.     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.