反应工程因素对十二碳烯氢甲酰化反应速率和正异比的影响

在研究烯烃氢甲酰化反应过程中 ,水溶性催化剂由于具有安全、易回收以及对环境友好等优点而受到广泛的关注[1] .水溶性铑膦络合物催化剂已成功用于丙烯氢甲酰化的工业生产 ,但 1-十二碳烯等长链烯烃的强烈憎水性使得氢甲酰化反应速率极低 .加入阳离子表面活性剂[2 ] ,在反应体系中形成胶束 ,可以提高 1-十二碳烯氢甲酰化反应速率 .水溶性铑膦络合物催化十二碳烯氢甲酰化反应是一个典型的气液液三相反应 ,影响宏观反应动力学和产物正异比的因素很多 .以前的实验已系统地研究了温度、压力、氢气与一氧化碳摩尔比、催化剂浓度、油水比、膦铑比…     

HYDRODYNAMIC STUDIES ON LOOP REACTORS(Ⅱ) AIRLIFT LOOP REACTORS

Hydrodynamics of airlift loop reactors was studied in detail experimentally andtheoretically.An internal airlift loop reactor was designed and set up for this study.An instru-mentation system based on the electrochemical method was adapted to measure local gas holdup andliquid velocity.A two-dimensional two-fluid model based on the first principles was established andimplemented to model the flow in airlift loop reactors.A corrected turbulent model was incorporatedin the simulation.The shear rate,shear stress and energy dissipation are evaluated from the flowfield.The numerically predicted results and experimental data obtained from this work as well as thesereported in literature are analyzed and compared.     

水平集方法数值模拟单液滴的生成过程(英文)

液滴生成的动力学过程和机理,对溶剂萃取、喷墨打印机设计、飞行器保护等有重要意义。虽然已有很多相关的实验、理论和计算研究,但对涉及拓扑变形界面的该问题研究仍富有挑战性,常用的有限元等模拟方法还有待改进。1988年提出的水平集(Level set)方法,可以比较简方便地模拟多相变形界面问题,已成功用于多相流、结晶、浇铸、模式识别等过程的计算。作者在对水平集方法进行改进并用于相间传质模拟的基础上,本文数值模拟了单个液滴在毛细管口的生长和脱离过程。假设流体均为不可压缩液体或气体作层流流动,采用二维轴对称欧拉坐标和交错网格,利用控制容积法和SIMPLE算法离散求解藕合水平集函数的运动方程组。水平集函数的发展方程和重新初始化方程的空间与时间离散格式,分别采用5阶WENO(Weighted essentially nonoscillatory)和3阶TVD(Total variation diminishing)Runge-Kutta格式。初步计算了不同参数的单液滴在气体或另一不互溶液体中的生成过程,液滴的拓扑形状、两相流场和液滴大小与实验或文献报道的模拟结果基本吻合,为今后拓展模拟三维空间的不稳定运动液滴或气泡生成过程的流动和传递奠定了基础。     

Numerical Study of Solid-Liquid Two-Phase Flow in StirredTanks with Rushton Impeller(Ⅱ) Prediction of Critical Impeller Speed

The critical impeller speed, NJS, for complete suspension of solid particles in the agitated solid-liquid two-phase system in baffled stirred tanks with a standard Rushton impeller is predicted using the computational procedure proposed in Part I. Three different numerical criteria are tested for determining the critical solid suspension. The predicted NJS is compared with those obtained from several empirical correlations. It is suggested the most reasonable criterion for determining the complete suspension of solid particles is the positive sign of simulated axial velocity of solid phase at the location where the solid particles are most difficult to be suspended.     

气提式反应器中气液传质的初步研究

研究气提式环流反应器(通称Pachuca tank)中的气液相间传质,对于评价其作为气液反应器的应用价值,对于进一步研究气提式气液固三相反应器的宏观动力学过程、建立数学模型,都是十分必要的,但迄今文献中研究气提式反应器氧化反应动力学的结果,     

RESIDENCE TIME DISTRIBUTION STUDIES WITH TRACER EXPERIMENTS:IMPULSE INJECTION VERSUS STEP CHANGE OF FEED

1 INTRODUCTIONThe popularly used axial dispersion model is mathematically expressed by aone-dimensional partial differential equation     

搅拌槽内液-固两相体系的数值研究(Ⅰ)流场的数值模拟

Three-dimensional solid-liquid flow is mathematically formulated by means of the “two-fluid” approach and the two-phase k-ε-Ap turbulence model. The turbulent fluctuation correlations appearing in the Reynolds time averaged governing equations are fully incorporated. The solid-liquid flow field and solid concentration distribution in baffled stirred tanks with a standard Rushton impeller are numerically simulated using an improved “inner-outer” iterative procedure. The flow pattern is identified via the velocity vector plots and a recirculation loop with higher solid concentration is observed in the central vicinity beneath the impeller. Comparison of the simulation with experimental data on the mean velocities and the turbulence quantities of the solid phase is made and quite reasonable agreement is obtained except for the impeller swept volume. The counterpart of liquid phase is presented as well. The predicted solid concentration distribution for three experimental cases with the average solid concentration up to 20% is also found to agree reasonably with the experimental results published in the literature.     

搅拌槽内液-固两相体系的数值研究(Ⅱ)临界搅拌转速的预测

The critical impeller speed, NJS, for complete suspension of solid particles in the agitated solid-liquid two-phase system in baffled stirred tanks with a standard Rushton impeller is predicted using the computational procedure proposed in Part Ⅰ. Three different numerical criteria are tested for determining the critical solid suspension. The predicted NJS is compared with those obtained from several empirical correlations. It is suggested the most reasonable criterion for determining the complete suspension of solid particles is the positive sign of simulated axial velocity of solid phase at the location where the solid particles are most difficult to be suspended.