Effects of Self—coiling of Organic Molecules on Intramolecular Exciplex Formation and Fluoresscence Quenching in DX—H2O Solvent System

Effects of self-coiling of organic molecules on intramolecular exciplex formation of compound I,in which the carbazole chromophore and terephthalic acid methylester acceptor group are linked by one (CH2)10 chain,and the decrease of the fluorescence intensities of compounds Ⅱ，Ⅲ，and Ⅳ,in which the carbazole chromophore and 3,5-dinitrobenzoate are connected by one aliphatic chain of (CH2)10 (Ⅱ），（CH2）12（Ⅲ）,or (CH2)4(Ⅳ）,have been studied in the dioxane (DX)-H2O binary system.The results show that self-coiling of organic molecules in DX-H2O facilitates intramolecular exciplex formation of I and induces the decrease of fluorescence intensities of Ⅱ,bacause of the proximity effect brought about by selfcoiling of organic molecules under hydrophobic-lipophilic interaction(HLI) between the excited carbazole chromophore and the acceptor.Since the similar effects are observed even when the concentration of the probes are less than their CAgCs(critical aggregate concentrations )in the DX-H2O mixture with the same φ values,formation of the intermolecular exciplex has been excluded.The effects are found to be strongly depended on φ values,indication that they are mainly driven by HLI.The properties of the acceptors can also affect the intramolecular exciplex formation.With terephthalic acid methylester moiety as the acceptor,the carbazole chromophore exhibits the fluorescence spectra of the exciplex,while with 3,5-dinitrobenzoate moiety as the acceptor,only the fluorescence spectra of excited carbazolyl chromophore are observed.     

钯催化胺的羰基化反应

综述了钯催化胺的单，双羰基化反应以及钯催化胺基化反应工业及有机合成中的应用，同时对羰基化反应新进展－超临界二氧化碳流体作为反应介质也作了综述。     

多壁碳纳米管结构与其电化学容量之间关系的研究

采用化学气相沉积法,通过改变催化剂的成分、碳源、反应和后处理条件来制 备不同管径、管长、石墨化程度的多壁碳纳米管。经电化学容量性能测试、透射电 子显微镜观察和N_2吸附等结构表征,发现管径分布为30.0～40.0 nm、管长越短、 石墨化程度越低、比表面积越大、孔容越大的多壁碳纳米管具有更好的电化学容量 。     

氯离子对铜在玻碳电极上电结晶的影响

采用线性扫描伏安法和计时安培法研究了硫酸铜溶液中铜在玻碳电极上电结晶 的初期行为。在含与不含氯离子的0.05mol·L~(-1) cUso_4-0.5 mol·L~(-1) H_2SO_4电解液中,循环伏安实验结果表明铜在玻碳基体上的沉积没有经过UPD过 程;氯离子明显使Cu的沉积和氧化峰变得尖锐,促进Cu的沉积速度。计时安培实验 结果表明,Cu的电结晶按瞬时成核和三维生长方式进行。氯离子不改变Cu的结晶机 理,但在I～t曲线中,导致电流达最大(I_m)所需的时间t_m减小、晶核数密度和生 长速度增大,从而明显改变Cu沉积层的质量。当Cl~-浓度在10～20mg·L~(-1)范围 内,成核的晶核数密度达较大,即氯离子的最适宜添加量。     

硫化镉/二氧化硅复合材料的合成

结合亲核取代反应与硅氧烷水解和硅羟基缩合反应,制备了羧酸镉/二氧化硅复合材料。通过硫化反应,实现了立方结构和六方结构硫化镉纳米粒子在复合材料中的原位制备。复合材料中硫化镉纳米粒子的发射峰位在617 nm,属于红色荧光(三元色之一)。硫化镉/二氧化硅复合材料在光学器件方面具有潜在的应用前景。     

Crowding effect induced phase transition of amphiphilic diblock copolymer in solution

The crowding agent induced phase transition of amphiphilic block copolymers in solution was explicitly considered. The influence of the size and the volume fraction of the crowding agent on the phase separation of amphiphilic diblock copolymers is investigated by using self-consistent field theory (SCFT) method. The concentration of the disorder to order transition of the block copolymer decreases when the size of the crowding agent is larger than that of the solvent. The higher volume fraction of the crowding agent will induce the transition of the block copolymer from disorder to order state at a lower concentration. The relation between the size and the volume fraction of the crowding agent is elucidated. When the size of the crowding agent is larger, its volume fraction of the disorder to order transition of the block copolymer will be lower. The conformation of the crowding agent considered as a polymer chain is also studied and compared.     

Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Use of neutral capillaries for the enantioseparation of N‐benzoylated amino acids by capillary electrophoresis with bromobalhimycin as chiral selector

In this study, the partial filling technique on both polycationic polymer hexadimethrine bromide (HDB) modified capillary and eCAP neutral capillary were systematically compared in order to enhance the enantioseparation ability of bromobalhimycin as CE additive. The separation conditions, such as pH, the plug length, and the concentration of bromobalhimycin, etc., were optimized in order to obtain satisfactory separations. As expected, for all tested 28 N‐benzoylated amino acids, up to five times higher enantioresolutions were obtained on the eCAP neutral capillary compared to that on the polycationic polymer hexadimethrine bromide modified capillary. Moreover, 26 of 28 tested racemic compounds were almost baseline‐ resolved without observing any interference from the front of the plug of bromobalhimycin. Although the limitation of longer running time on the neutral capillary, it allows the use of higher content of bromobalhimycin in the running buffer without any interference on the detection of analytes when enantioseparations are more difficult to obtain.     

Multifractal analysis for Cu/Ti bilayer thin films

Two bilayer thin films with different stacking sequences, Cu/Ti/Si and Ti/Cu/Si, were deposited by DC magnetron sputtering technique. X‐ray diffraction technique was used to measure the crystallization structures, and scanning electron microscopy and atomic force microscopy were used to measured surface morphology. The multifractal spectra f(α)‐α was used to characterize the surface morphology. The result of |q|_max ≤ 53 is obtained by multifractal analysis. The shape of the multifractal spectra f(α) ? α is hook‐like for Cu/Ti/Si and bell jar‐like for Ti/Cu/Si. The spectrum width Δα = α_max ? α_min and Δf(=f(α_min) ? f(α_max)) of the multifractal spectra is able to quantitatively analyze the growth and surface roughness of the Cu/Ti bilayer thin films. The surface of Ti/Cu/Si thin film is more uniform and smoother than the film of Cu/Ti/Si. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,Structures, Luminescent and Magnetic Properties of Heterometallic 5p‐4f Compounds with Ethylenediaminetetra­acetate

A series of heterometallic Ln^III–Sb^III edta‐containing compounds with the formulas [Sb₂(edta)₂Ln]NO₃ · nH₂O [edta = ethylenediaminetetraacetate; Ln = Eu, n = 7 ( 1 ); Gd, n = 7.5 ( 2 ) and Tb, n = 8 ( 3 )] were synthesized and characterized by elemental analyses (EA), powder X‐ray diffraction (PXDP), Fourier transform infrared spectroscopy (FT‐IR), and thermogravimetric analyses (TGA). Their fluorescence and magnetic properties were also studied. The thermal analysis demonstrates the compounds formation of the antimony, lanthanide ions, and edta^4– ligands. FT‐IR spectra reveal that the antimony and lanthanide ions are connected through the carboxylate bridges. The studies of luminescence properties show that compounds 1 and 3 exhibit typical luminescence in the visible region. Furthermore, magnetic properties reveal compounds 2 and 3 have weak ferromagnetic behavior.