Electronic Structure and Photophysical Properties of Isoindole and its Benzo[f]- and Dibenzo[e,g]-Derivatives

The synthesis of N-methyl-benz[f]isoindole ( 2 ) and N-methyl-dibenz[e,g]isoindole ( 3 ) is reported. The NMR. spectra of N-methyl-isoindole ( 1 ) and of 2 have been analysed and the implications concerning the alternation of bond lengths are discussed. The photophysical properties of 1 to 3 have been investigated by the following methods: HeI photoelectron (PE.) spectroscopy, UV./VIS. absorption (polarization measurements by the stretched-foil technique) and emission spectroscopy (fluorescence spectra, lifetimes and quantum yields, phosphorescence spectra), and flash spectroscopy (triplet-triplet absorption spectra). The discussion of the results is based on HMO. and PPP SCF CI. calculations and points to the relationship between the heterocycles 1 to 3 and the corresponding benzenoid hydrocarbons obtained by replacement of the ? NMe? subunit by ? CH?CH? . Some comments concerning the ground state properties of isoindole and related compounds are derived from the analysis of their electronic structure.     

Artificial multiple criticality and phase equilibria: an investigation of the PC-SAFT approach

The perturbed-chain statistical associating fluid theory (PC-SAFT) is studied for a wide range of temperature, T, pressure, p, and (effective) chain length, m, to establish the generic phase diagram of polymers according to this theory. In addition to the expected gas-liquid coexistence, two additional phase separations are found, termed "gas-gas" equilibrium (at very low densities) and "liquid-liquid" equilibrium (at densities where the system is expected to be solid already). These phase separations imply that in one-component polymer systems three critical points occur, as well as equilibria of three fluid phases at triple points. However, Monte Carlo simulations of the corresponding system yield no trace of the gas-gas and liquid-liquid equilibria, and we conclude that the latter are just artefacts of the PC-SAFT approach. Using PC-SAFT to correlate data for polybutadiene melts, we suggest that discrepancies in modelling the polymer density at ambient temperature and high pressure can be related to the presumably artificial liquid-liquid phase separation at lower temperatures. Thus, particular care is needed in engineering applications of the PC-SAFT theory that aims at predicting properties of macromolecular materials.     

Nucleotides. Part XLVIII. Synthesis of 2′-amino-2′-deoxyarabinonucleoside phosphoramidite building blocks

Chemical syntheses of 2′-amino-2′-deoxyarabinonucleosides of uracil, thymine, cytosine, adenine, and guanine and their conversion into suitably protected 3′-phosphoramidite building blocks 24–28 for oligonucleotide synthesis are described. The 2-(4-nitrophenyl)ethoxycarbonyl (npeoc) group was used for protection of the aglycon and the 2′-amino functions.     

Organometallic Syntheses with Diazoalkanes

In recent years, aliphatic diazo compounds have proved to be more and more versatile as reagents in the preparative chemistry of organometallic complexes. As readily accessible compounds, they are not only suitable for the synthesis of known kinds of metal complexes but also open fresh routes to novel complex systems. The comparatively new field of diazoalkane complex chemistry exhibits numerous unexpected and novel reactions, and introduces interesting and promising aspects into the chemistry of carbonylmetal compounds.     

Übergangsmetall-substituierte phosphane,arsane und stibane : XXV. C5H5(CO)2[P(OMe)3]M-substituierte dioxaphospholane und dioxarsolane; stereochemische evidenz für den intermolekularen ablauf einer isomerisierung unter methylgruppenverschiebung

2-C₅H₅(CO)₂[P(OMe)₃]Mo(W)-substituted 4,4,5,5-tetramethyl-1,3,2-dioxarsolanes and -dioxaphospholanes (Ia–Ic) are obtained from C₅H₅(CO)₃M derivatives via CO/P(OMe)₃ exchange. In all cases the phosphite ligand appears trans to the σ-bonded arsenic heterocycle, which prefers a conformation with the transition metal group in an axial position. The dioxaphospholane-metal (Ia) undergoes isomerization with alkyl migration at 0°C, which due to stereochemical reasons can only occur by an intermolecular mechanism.     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

On the Stereochemistry of Natural Irones,Dihydroirones, and their Precursors

Natural irones from the essential oil of Iris rhizomes develop by oxidative degradation of C₃₁-triterpenoids produced by the plant. Two enantiomeric forms of irones are found in Iris, oils of different origin. The optical properties and CD spectra of irones, dihydroirones and their C₃₁-precursors are reported and their absolute stereochemistry is determined.     

Chlor-dimethylaminosulfonium-Salze Darstellung und IR-Spektren

Chloro-dimethylaminosulfonium Salts. Preparation and I. R. Spectra By reaction of bis-dimethylamino-mono- resp. -disulfane with a mixture of chlorine/antimony(V) chloride the chloro dimethylaminosulfonium hexachloroantimonates(V) [(CH₃)₂N]₂SCI^⊕SbCl₆^? (I) and (CH₃)₂NSCI₂^⊕SbCl₆^? (II) are yielded. The i. r. spectra of these compounds were measured and assigned.     

Synthesis and characterization of Cu,Ni and Zn binding capability of some amino- and imidazole hydroxamic acids: Effects of substitution of side chain amino-N for imidazole-N or hydroxamic-N-H for -N-CH3 on metal complexation

Solution equilibrium studies on Cu(II)-, Ni(II)- and Zn(II)-N-Me-β-Alaninehydroxamic acid (N-Me-β-Alaha), -N-Me-α-alaninehydroxamic acid (N-Me-α-Alaha), -Imidazole-4-carbohydroxamic acid (Im-4-Cha), -N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha) and -Imidazole-4-acetohydroxamic acid (Im-4-Aha) systems have been performed by pH-potentiometry, UV–Vis spectrophotometry, EPR, CD, ESI-MS and ¹H NMR methods. According to the results: (i) the amino-N atoms are more basic in N-Me-α-Alaha and N-Me-β-Alaha than the hydroxamate function, but the trend is just the opposite between the imidazole-N(3) and hydroxamate. (ii) The metal ion anchor is always the hydroxamate part in the amino acid derivatives, while it is always the imidazole-N(3) in the studied imidazolehydroxamic acids. (iii) The three studied N-Me derivatives do not form metallacrowns. Only hydroxamate type chelate is formed with N-Me-β-Alaha, but with N-Me-α-Alaha a new type of coordination mode (via amino-N and hydroxamate-O) also exists. N-Me-Im-4-Cha also forms a dinuclear complex, [M₂L₃], with Cu(II) and Ni(II) (but not with Zn(II)). In this complex, one of the three ligands might bridge the two metal ions (five-membered hydroxamate-(O,O) plus five-membered (N_im, O_carb) bridging bis-chelating mode), while each of the additional two ligands binds to one metal. (iv) The two studied N–H derivatives, having dissociable proton on the hydroxamic-N, are able to form metallacrown species. A pentanuclear complex, [M₅L₄H₋₄], is exclusively formed above pH 4 between Cu(II) and Im-4-Aha. Interestingly, this 12-metallacrown-4 type complex, although together with various mononuclear binding isomers, appears also with Ni(II) and Zn(II). Unfortunately, the complexes of Im-4-Cha are not soluble in water at physiological pH at all.     

The Azo(Azoxy) Functionality as a π2 Component in Photo [2+2] cycloadditions ‘syn’- and ‘anti’-3,4-diazatricyclo[4.2.2.22,5]dodeca-3,7-diene,syntheses, photolyses,X-ray-structure analysis,and PE spectra

The propensity of the N?N bond to undergo photo [2 + 2] cycloadditions has been further explored. In the specifically designed 1,5-azo/enes 1–3 , no [2 + 2] cycloaddition has been observed upon either direct or sensitized excitation with light of various wave lengths at temperatures down to 77 K, in line with expectations based on X-ray ( 1 : d = 2.71 Å, ω = 129°) and PE measurements ( 1 : I₁ = 8.0₀, I₂ = 9.0₅ eV; 2 ; I₁ = 8.0₀, I₂ = 9.2₅eV). The steric/stereoelectronic demands for the participation of the N?N bond in pericyclic reactions are clearly more stringent than those for the C?C bond.