Design, synthesis, and biological evaluation of a dansyled amino acid derivative as an imaging agent for apoptosis

To develop a small molecule-based biomarker for in vivo apoptosis imaging, a dansyled amino acid derivative (BNSBA) was designed and synthesized in good yield. The biological evaluation demonstrated that BNSBA selectively binds to apoptotic cancer cells and is localized within the cytoplasm of cells that bound annexin V on the plasma membrane.     

一类p-Laplace方程边值问题解的存在性

主要讨论一维p-Laplace方程在Neumann边值条件u(0)=0,u(1)=0下,对应的边值问题解的存在性.通过使用度理论,在适当的条件下,建立了对于p-Laplace方程在Neumann条件下解的存在性的充分条件.     

Calorimetric study of ternary binder of calcium aluminate cement,Portland-limestone cement and FGD gypsum

To use flue gas desulfurization (FGD) gypsum and limestone as supplement of cement, conduction calorimetry was applied to investigate the early hydration of ternary binder of calcium aluminate cement (CAC), Portland-limestone cement (PLC), and FGD gypsum, supplemented with the determination of setting times and X-ray diffraction (XRD) analysis. Different exothermal profiles were presented in two groups of pastes, in which one group (group A) sets the mass ratio of FGD gypsum/CAC at 0.25 and the other group (group B) sets the mass ratio of PLC/CAC at 0.25. Besides the two common exothermal peaks in cement hydration, a third exothermal peak appears in the pastes with 5–15% FGD gypsum after gypsum is depleted. It is found that not PLC but FGD gypsum plays the key role in such ternary binder where the reaction of ettringite formation dominates the hydration process. PLC accelerates the hydration of ternary binder, which mainly attributes to the nucleating effect of fine limestone particles and PC clinker. The modified hydration process and mechanism in this case is well visualized by the means of calorimetry and it helps us to optimize such design of ternary cementitious material.     

基于傅里叶模方法的KDP晶体镀膜减反技术

 采用傅里叶模方法,分析了单点金刚石铣削后KDP晶体表面小尺度波纹的周期和幅值对单层增透膜折射率、厚度以及透射率的影响。研究表明：膜层最佳折射率在1.22左右,在此折射率条件下,保证透射率大于99%的单层增透膜的理想厚度范围应为180~220 nm,并且折射率和膜厚值的选取基本不受晶体表面小尺度波纹周期和幅值的影响。若只考虑SPDT法加工后KDP晶体表面小尺度波纹周期和幅值的实际范围,透射率基本不受波纹周期的影响,但却会随波纹幅值的增大而加速下降。理想镀膜条件下透射率最大值大于99%,并且通常在99.67%~99.94%之间。     

紫外光固化阳离子复合胶粘剂的制备与表征

 以三芳基六氟磷酸硫鎓盐为引发剂,钛酸四异丙酯(TIP)为无机前驱体,3,4-环氧环己基甲基3,4-环氧环己基甲酸酯为单体,制备了含TiO2纳米结构的紫外光固化阳离子复合胶粘剂。通过原子力显微镜对复合胶粘剂形貌进行表征,研究了TIP含量对胶粘剂折射率和光透过率的影响。结果表明：TiO2无机相均匀地分散在胶粘剂的聚合物基体中,平均粒径约为20 nm;随着体系中TIP质量分数的变化,复合胶粘剂折射率为1.510 3~1.540 9可调;胶粘剂的光透过率随TIP质量分数增加略有减低,但当TIP含量高达40%时,光透过率维持在90%左右。     

Theory of modified thermally stimulated current and direct determination of trap level distribution

In order to investigate the trap level distribution in polymer films, a new method is proposed based on modified thermally stimulated current (TSC) theory and numerical calculation of the TSC measurement. In this method, a new function is defined to weight the contribution of every trap level to the external current. The demarcation energy is used to study the trap emptying process. The modified TSC theory shows that only the electrons with trap levels very close to the demarcation energy can significantly contribute to the external circuit at any instant temperature. Based on this method, the trap level distribution of the DuPont original polyimide film 100HN and nanocomposite polyimide film 100CR are investigated as an application example. The effectiveness of the method is confirmed by the experiments. The experimental results show that the trap level density in the 100CR PI films is about six times larger than that in the 100HN PI films through the investigated trap level ranges 06–1.3 eV. The increased traps in 100CR should be introduced by nanofillers, probably come from the interfaces formed between nanofillers and the polymer matrix.     

Effects of He－Ne laser irradiation on enzyme activity in milking Goats＇ seminal plasma

ＥｆｆｅｃｔｓｏｆＨｅ－ＮｅｌａｓｅｒｉｒｒａｄｉａｔｉｏｎｏｎｅｎｚｙｍｅａｃｔｉｖｉｔｙｉｎｍｉｌｋｉｎｇＧｏａｔｓ＇ｓｅｍｉｎａｌｐｌａｓｍａＹＵＥＷｅｎｂｉｎ；ＺＨＥＮＧＸｉａｏｚｈｏｎｇ；ＣＵＩＢａｏｗｅｉ；ＬＩＫｅｌｕ（ＳｈａｎｘｉＡｇｒ...