Photoinduced magnetization with a high curie temperature and a large coercive field in a cyano-bridged cobalt-tungstate bimetallic assembly

A three-dimensional magnetic material [{CoII(pyrimidine)(H2O)}2{CoII(H2O)2}{WV(CN)8}2](pyrimidine)2. 2H2O is prepared. This compound exhibits a charge-transfer-induced spin transition with a large thermal hysteresis loop of 90 K. Irradiating with light causes the low-temperature phase to exhibit a spontaneous magnetization with a Curie temperature of 40 K and a magnetic hysteresis loop with a coercive field of 12 000 G, which is the highest value reported for a photomagnet. The observed photoinduced magnetization is due to the charge-transfer phase transition from the {CoIIhs(S = 3/2)}{CoIIIls(S = 0)}2-NC-{WIV(S = 0)}2 phase to the {CoIIhs(S = 3/2)}3-NC-{WV(S = 1/2)}2 phase by the irradiation.     

Dispersion and separation of small-diameter single-walled carbon nanotubes

The dispersion of small-diameter single-walled carbon nanotubes (SWNTs) produced by the CoMoCAT method in tetrahydrofuran (THF) with the use of amine was studied. The absorption, photoluminescence, and Raman spectroscopies showed that the dispersion and centrifugation process leads to an effective separation of metallic SWNTs from semiconducting SWNTs. Since this method is simple and convenient, it is highly applicable to an industrial utilization for widespread applications of SWNTs.     

Thermal properties and mixing state of ethylene glycol-water binary solutions by calorimetry, large-angle X-ray scattering, and small-angle neutron scattering

Thermal properties and mixing states of ethylene glycol (EG)-water binary solutions in the entire mole fraction range of EG, 0 < or = x(EG) < or = 1, have been clarified by using differential scanning calorimetry (DSC), large-angle X-ray scattering (LAXS), and small-angle neutron scattering (SANS) techniques. The DSC curves obtained have shown that the EG-water solutions over the range of EG mole fraction 0.3 < or = x(EG) < or = 0.5 are kept in the supercooling state until approximately 100 K, and those in the range of 0.6 < or = x(EG) < or = 0.8 are vitrified, and those in the ranges of 0 < x(EG) < or = 0.2 and 0.9 < or = x(EG) < 1 are crystallized. The radial distribution function (RDF) for pure EG obtained from the LAXS measurements has suggested that a gauche conformation of an EG molecule is favorable in the liquid. The RDFs for the EG-water solutions have shown that the structure of the binary solutions moderately changes from the inherent structure of EG to the tetrahedral-like structure of water when the water content increases. The SANS intensities for deuterated ethylene glycol (HOCD2CD2OH) (EGd4)-water solutions at x(EG) = 0.4 and 0.6 have not been significantly observed in the temperature range from 298 to 173 K, showing that EG and water molecules are homogeneously mixed. On the other hand, the SANS intensities at x(EG) = 0.2 and 0.9 have been strengthened when the temperature decreases due to crystallization of the solutions. On the basis of all the present results, a relation between thermal properties of EG-water binary solutions and their mixing states clarified by the LAXS and SANS measurements has been discussed at the molecular level.     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Destabilization of cytochrome c by modified β-cyclodextrin

To clarify the effect of cyclodextrin (CD) on the stability of cytochrome c, the thermal denaturation of cytochrome c was measured by differential scanning calorimetry in aqueous solutions of β-CD modified with three substituents: methyl, acetyl, and 2-hydroxylpropyl groups. The midpoint temperature of thermal denaturation decreased with the addition of modified β-CDs, indicating that cytochrome c was destabilized. The destabilization effect of CD depended on the substituent and increased in the order of acetyl>methyl>2-hydroxypropyl. The estimated binding number and binding constant of the modified β-CDs for cytochrome c are 5.0 ± 1.0 and 10.3 ± 2.9 M^?1 for methyl-β-CD, 13.8 ± 3.6 and 4.7 ± 1.6 M^?1 for acetyl-β-CD, and 2.8 ± 0.9 and 7.0 ± 3.0 M^?1 for 2-hydroxypropyl-β-CD. The destabilization effect of acetyl-β-CD is the highest because many CD molecules interact with proteins by the inclusion effect of CD and the inhibition effect of the acetyl group on the hydrogen bond in the secondary structure. In contrast, the stabilization effect of 2-hydroxypropyl-β-CD is the smallest because the steric exclusion of the 2-hydroxypropyl group inhibits the binding of CD to cytochrome c as compared with the smaller structure of the methyl group. Dependency of the destabilization effect on the molar ratio of CD to cytochrome c suggests that the destabilization effect of CD is caused not only by the “direct” interaction of CD with proteins but also by the “indirect” interaction of CD which promotes the solvation of hydrophobic groups by altering the water structure as observed in urea.     

Photoassisted chemical solution deposition method for fabricating uniformly epitaxial VO2 films

Epitaxial VO₂ films were prepared on the TiO₂ (001) substrates by the excimer-laser-assisted metal–organic deposition (ELAMOD). The quality of the epitaxial films obtained by irradiation with a KrF laser was found to be affected by the film structure obtained after preheating at 500 or 300°C. When the films containing crystal domains, which were obtained by preheating at 500°C, were irradiated with the laser at room temperature under a base pressure of 250 Pa, epitaxial and polycrystalline VO₂ phases were simultaneously formed. In contrast, when the amorphous films containing organic components, which were obtained by preheating at 300°C, were irradiated with the laser at room temperature in air, a single phase of epitaxial VO₂ was formed. By using thermal simulations, we determined that the formation of the epitaxial phase was affected both by the temperature distribution within the film during the laser irradiation and by the laser intensity at the interface between the substrate and the film. The latter factor is considered to play a role in the nucleation of crystallization, causing the epitaxial phase to form preferentially compared to the polycrystalline phase in the amorphous matrix of the films. These results indicate that the ELAMOD process is effective for the fabrication of epitaxial VO₂ films at low temperature.     

Relations of electronic energies and magnetic moments of tetra-3d metal (Mn, Fe, Co and Ni) nitrides calculated using a plane-wave basis method

Geometrical optimization of tetra-3d metal nitrides (Mn₄N, Fe₄N, Co₄N, and Ni₄N) has been performed and the relations of their energies (E) and their total magnetic moments (M) are obtained by plane-wave-basis density-functional calculations without any assumption of specific spin arrangement. The E vs. M relations obtained for Fe₄N and Mn₄N have a bimodal character. The ground state of Fe₄N is a high-spin state, which would correspond to the ferromagnetic character, while that of Mn₄N is a low-spin state, which would correspond to the observed ferrimagnetic character. Lattice constants and total magnetic moments of these tetra-3d metal nitrides are almost accurately predicted. From the spin-polarized densities of states curves, Co₄N would have the largest spin polarization ratio of 0.88, which suggests Co₄N can be a candidate material for ferromagnetic electrodes for spin-injection.