新型成像技术的实验系统研究

光学相干层析成像是一种新型成像技术。超辐射发光二极管和超短脉冲飞秒激光是能满足成像系统要求的理想光源。在开展光学相干层析相关技术研究的基础上 ,建立了国内第一台上述两种光源的成像实验研究装置 ,对系统的横向、纵向分辨率等基本性能进行了测定 ;并对多种实际样品进行了层析成像。     

Some analytical results for congestion in subscriber line modules

In modern telephone exchanges, subscriber lines are usually connected to the so-called subscriber line modules. These modules serve both incoming and outgoing traffic. An important difference between these two types of calls lies in the fact that in the case of blocking due to all channels busy in the module, outgoing calls can be queued whereas incoming calls get busy signal and must be re-initiated in order to establish the required connection. The corresponding queueing model was discussed recently by Lederman, but only the model with losses has been studied analytically. In the present contribution, we study the model which takes into account subscriber retrials and investigate some of its properties such as existence of stationary regime, derive explicit formulas for the system characteristics, limit theorems for systems under high repetition intensity of blocked calls and limit theorems for systems under heavy traffic.     

DFT investigation of the geometrical and electronic structures of (X = B, N and Si) clusters

Geometrical and electronic structures of C₃₅X fullerenes with , N and Si as substitutional dopants have been studied. Three non-equivalent sites in the D_6h structure of C₃₆ have been considered for the substitution. We have found that the dopant has a strong tendency to substitute at sites where the carbon atom contributes significantly to the frontier orbitals of C₃₆ and has the weakest interaction with its nearest-neighbor atoms. The relative stability of C₃₅Si and C₃₅B (C₃₅N) has been investigated and high chemical reactivity of C₃₅Si has been predicted. Received 8 July 1999 and Received in final form 4 October 1999     

On quantum cluster algebras of finite type

We extend the definition of a quantum analogue of the Caldero-Chapoton map defined by D. Rupel. When Q is a quiver of finite type, we prove that the algebra (Q) generated by all cluster characters is exactly the quantum cluster algebra (Q).     

A new class of complementarity functions for symmetric cone complementarity problems

A popular approach to solving the complementarity problem is to reformulate it as an equivalent equation system via a complementarity function. In this paper, we propose a new class of functions, which contains the penalized natural residual function and the penalized Fischer–Burmeister function for symmetric cone complementarity problems. We show that this class of functions is indeed a class of complementarity functions. We finally prove that the merit function of this new class of complementarity functions is coercive.     

Existence and iterative algorithm of solutions for a system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems in Banach spaces

In this paper, we introduce and study a new system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems and its related auxiliary problems in reflexive Banach spaces. The auxiliary principle technique is applied to study the existence and iterative algorithm of solutions for the system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems. Firstly, we prove the existence and uniqueness of solutions of the auxiliary problems for the system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems. Secondly, an iterative algorithm for solving the system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems is constructed by using this existence and uniqueness result. Finally, we show the existence of solutions of the system of generalized set-valued strongly nonlinear mixed variational-like inequalities problems and discuss the convergence analysis of this algorithm. These results improve, unify and generalize many corresponding known results given in literatures.     

Theoretical models for the extracavity Raman laser with crystalline Raman medium

The rate equation model of an extracavity Raman laser is deduced for the first time to the best knowledge of the authors. The normalized radiation transfer equations of the extracavity Raman laser are given. The normalized radiation transfer equations and rate equations were solved numerically to find the optimum reflectivity of the output coupler to realize the maximum conversion efficiency at the first Stokes for both the single and double-pass pumping configurations. Also, the pulse duration of the first Stokes was investigated numerically. The rate equations are verified to be a good approximation to the radiation transfer equations for the regime of low Raman gain and long pump pulse duration. Furthermore, it is found that the optimum reflectivity of the first Stokes and the second Stokes threshold are influenced significantly by the minor feedback of the resonator mirror at the second Stokes. PACS 42.55 42.55.Ye; 42.65 42.65.Dr; 02.60 02.60.Lj; 63.20 63.20.-e     

Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce3+对Er3+上转换发光强度以及Er3+在1.5 μm附近波段发光性能参数的影响,并从能量匹配及能级结构角度出发对Er3+/Ce3+间的能量转移机制进行了分析.分析认为,4 I11/2能级的Er3+通过无辐射能量转移把能量传递给2F5/2能级的Ce3+激发其跃迁至2F7/2能级,而4I11/2能级上的Er3+则无辐射弛豫至4I13/2能级,从而有效降低氟磷酸盐玻璃中Er3+的上转换发光.当Er3+浓度为1.11×1020 cm-3时,Ce3+的最佳掺杂浓度为2.22×1020 cm-3,此时Ce3+的引入不仅可以降低上转换发光,而且有助于提高Er3+在1.5 μm附近波段的荧光强度、发射截面以及4I13/2能级荧光寿命.     

980 nm激发下Er3+/Yb3+共掺杂ZrO2-Al2O3粉末的上转换发光特性

通过固相反应法制备了Er3+/Yb3+共掺杂ZrO2-Al2O3粉末的样品,并对样品在980nm激光激发下的上转换发光特性进行了研究.从发射光谱可以发现,在可见光范围内有3个强的发光带,一个位于654nm附近的红光带和两个分别位于545nm、525nm附近的绿光带,分别对应于Er3+离子的以下辐射跃迁:4F9/2→4I15/2、4S3/2→4I15/2、2H11/2→4I15/2.其中又以Er3+离子的4F9/2→4I15/2跃迁产生的红色荧光辐射最强.对其上转换发光机制进行了分析,发现这三个发光过程都是双光子过程.对样品粉末进行了XRD检测,发现ZrO2主要以立方相为主,并且计算得到了这种立方结构的晶格常数.Al2O3固溶于ZrO2中,Al3+嵌入ZrO2后产生氧空位,导致ZrO2晶体的对称性降低,这种结构变化更有利于提高上转换效率,即上转换发光强度增强.     

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Vibration isolation plays an important role in both the vibration and noise control of building services equipment. To evaluate vibration isolation performance, the force transmissibility method is commonly adopted. However, increasing the damping effect in the force transmissibility method reduces both the resonance peak value and the isolation performance in the “isolation region”. The limitation of the method is that the transmitted displacement of a floor structure and the interaction of mounting points are neglected. To include the floor displacement and the interaction of mounting points, Mak and Su recently proposed the power transmissibility method to assess the performance of vibration isolation. In this paper, the effect of viscous damping on power transmissibility is investigated. A practical procedure for experimentally determining the damping ratio is also given.