Single-step extraction and cleanup of bisphenol A in soft drinks by hemimicellar magnetic solid phase extraction prior to liquid chromatography/tandem mass spectrometry

Hemimicelles of tetradecanoate chemisorbed onto magnetic nanoparticles (MNPs) are here proposed as a sorbent for the single-step extraction and cleanup of bisphenol A (BPA) in soft drinks. The purpose of this work was to develop a simple, rapid and low-cost sample treatment suitable to assess the human exposure to BPA from this type of high consumption food. The nanoparticles were easily coated by mixing commercially available magnetite of 20–30 nm mean particle diameter with tetradecanoate at 85 °C for 30 min. The extraction/cleanup procedure involved stirring the samples (3 mL) with 200 mg of tetradecanoate-coated MNPs for 20 min, isolating the sorbent with a Nd–Fe–B magnet and eluting BPA with methanol. The extraction efficiency was not influenced by salt concentrations up to 1 M and pH values over the range 4–9. No cleanup of the extracts was needed, and the method proved matrix-independent. The extracts were analyzed by liquid chromatography, electrospray ionization tandem mass spectrometry. Quantitation was performed by internal standard calibration using BPA-¹³C₁₂. The limit of quantitation obtained for the method, 0.03 ng mL⁻¹, was below the usual range of concentrations reported for BPA in soft drinks (0.1–3.4 ng mL⁻¹). The proposed method was successfully applied to the determination of BPA in different samples acquired from various supermarkets in southern Spain; the concentrations found ranged from 0.066 to 1.08 ng mL⁻¹. Recoveries from samples spiked with 0.33 ng mL⁻¹ of BPA ranged from 91% to 105% with relative standard deviations from 3% to 8%.     

Micellar media in kinetic determinations

The role of micellar media in analytical reaction-rate methods is discussed. The Ce(IV)As(III) reaction in the presence and absence of iodide catalyst was selected in order to study its behaviour in the presence of surfactants. Dodecyltrimethylammonium bromide (DTAB) was found to increase the reaction rate of both systems. Evidence for a “micellar catalysis” effect by DTAB is demonstrated. The analytical potential of micelles in terms of sensitivity and enhanced selectivity is also discussed.     

Inter-channel de-correlation for perceptual audio coding

Sound reproduction is evolving towards multi-channel systems with a growing number of channels. Consequently, high quality multi-channel codecs are required. Last generation perceptual audio codecs, represented by MPEG advanced audio coder (AAC), can efficiently code typical surround multi-channel material but may benefit from a previous block of inter-channel de-correlation, for certain audio recordings. These recordings present high correlation between non-symmetric channels, or correspond to loudspeaker arrangements different from surround, such as linear loudspeaker arrays. In order to valuate the advantages of this new coding approach, a multi-channel perceptual quality measure is developed.     

Determination of salicylic acid and its metabolites in urine by derivative synchronous spectrofluorimetry

The simultaneous determination of salicylic acid in binary and/or ternary mixtures and its two main urinary metabolites is proposed. Mixtures of salicylic, salicyluric and gentisic acids are resolved by synchronous spectrofluorimetry, in combination with first-derivative measurements. The urine is extracted with diethyl ether in acid medium. Salicylic and salicyluric acids are re-extracted into glycine-sodium hydroxide buffer solution of pH 11.6 and determined at that pH, and salicylic and gentisic acids are re-extracted into boric acid-sodium hydroxide buffer solution of pH 8.5 and determined at pH 6.     

Combination of micellar and chemical catalysis as a means of enhancing the sensitivity of catalytic kinetic determinations

The combined effects of micellar and chemical catalysis were studied to improve the features of catalytic kinetic determinations. The bromate oxidative coupling reaction of p-phenetidine with catechol, catalysed by vanadium(V), was studied in the presence and absence of micelles of cetylpyridinium chloride (CPC). This cationic surfactant increased the reaction rate, which in turn resulted in an increase in the sensitivity by an order of magnitude in the kinetic determination of vanadium(V). A detailed study of the kinetics of both reactions is reported. The mechanism by which CPC and vanadium(V) exert their action was elucidated and the role of micellar media in catalytic kinetic methods is discussed.     

Electrical field-assisted solid-phase extraction coupled on-line to capillary electrophoresis-mass spectrometry

A substantial demand currently exists for analytical methods affording the determination of very low concentrations of analytes in complex matrices, such as those of environmental and biological samples, as simply as possible. However, the pretreatment of complex samples, which is unavoidable prior to CE-MS analysis, is usually complicated and time-consuming. In this work, we used voltage-assisted SPE for the first time as an alternative to conventional treatments for preconcentrating and purifying analytes. To this end, we used a simple flow system coupled on-line to CE-MS equipment. The system is quite robust and provides reproducible peak areas (the precision ranges from 2.5 to 3.8%). Also, it provides increased sensitivity affording the determination of trace amounts (nanogram per liter levels) of analytes in only a few milliliters of sample. The proposed system was applied to the determination of members of two compound families (viz. tetracyclines and amines).     

Classification of extra virgin olive oils according to the protected designation of origin, olive variety and geographical origin

A headspace-mass spectrometry (HS-MS) coupling designed for the sensory characterization and classification of extra virgin olive oil on the basis of its protected designation of origin, olive variety and geographical origin is reported. The procedure involves the headspace generation and the direct injection of the homogenized gaseous phase into a mass spectrometer through a transfer line. The results obtained were chemometrically treated to achieve the best model capable of discriminating between the different olive oil categories. For this purpose, several procedures for variables selection, data pretreatments and unsupervised techniques were evaluated. In addition, K-nearest neighbor and soft independent modeling of class analogy algorithms were employed to the classification models building. Taking into account the prediction results obtained (ca. 87% of samples correctly classified and a specificity of ca. 97%), it can be concluded than the HS-MS coupling is, with an adequate chemometric treatment, an appropriate technique for routine control.     

Supramolecular self-assembled arrangements of maltose glyconanoparticles

Our group previously reported the preparation of water-soluble Au-Fe(x)O(y) nanoparticles functionalized with a maltose neoglycoconjugate. A fraction soluble in methanol was also separated and originated a new supramolecular polymeric aggregate. We report here the full characterization of this novel material by transmission electron microscopy (TEM), fluorescence emission, and atomic force microscopy. By means of noncontact dynamic atomic force microscopy, we have been able to obtain information about the organization of the organic components of the polymers, which eluded TEM analysis. We have observed that polymers packed in units about 65 nm in length and 40 nm in width on Au surfaces. The nanoparticles seem to be encapsulated by the organic material. We propose interactions between the sugar residues and the amphiphilic character of the maltose neoglycoconjugate (with a lipophilic undecane spacer) as responsible for the origin of these amazing supramolecular arrangements.     

Rapid and quantitative evaluation of the effect of process variables on the kinetics of photocatalytic degradation of phenol using experimental design techniques and parallel factor (PARAFAC) analysis

A 2³ factorial design has been used to analyze the effect of pH, the nature of the catalyst, and the concentration of the substrate on the rate constant of the photodegradation reaction of phenol. The main effects of the considered variables and their interaction are discussed. The significance of the effects has been corroborated using an ANOVA test. The values of phenol concentrations, used to calculate the rate constant, and the concentrations of intermediates were obtained by applying parallel factor (PARAFAC) analysis to the data obtained from monitoring the process by means of excitation–emission fluorescence (EEM). The proposed methodology, which combines experimental design and multivariate techniques, is a rapid alternative for study of chemical kinetics.     

Development of an analytical method based on microwave-assisted extraction and solid phase extraction cleanup for the determination of organochlorine pesticides in animal feed

A method to determine 21 organochlorine pesticides in animal feed samples using microwave assisted extraction and solid phase extraction cleanup was optimised regarding its main parameters. After extraction with hexane-acetone (50:50), three different sorbents (alumina/ENVI-Florisil, ENVI-Carb and ENVI-Carb II/PSA) were assayed for the cleanup step. Analytes were eluted with hexane-ethyl acetate (80:20) and determined by gas chromatography and electron capture detection followed by gas chromatography-mass spectrometry. ENVI-Carb and ENVI-Carb II/PSA provided colourless eluates but fewer interferent compounds were found in ENVI-Carb II/PSA chromatograms, so this system was selected to carry out the purification of the extracts. The analytical recoveries obtained with this method were close to 100% in most cases with relative standard deviations lower than 10%. These percentages were similar to those obtained with the Soxhlet extraction procedure, which shows the method suitable for the determination of organochlorine pesticides in animal feed material. The method was also validated with the analysis of a certified reference material (CRM-115 BCR), and the results obtained were in good accordance with the certified values.