Supercritical carbon dioxide extraction of volatiles from spices. Comparison with simultaneous distillation-extraction

Supercritical fluid extraction (SFE) and simultaneous distillation-extraction (SDE) were used to extract the essential oils from three different spices (oregano, basil, and mint), and a comparative study of extracts obtained using SFE and SDE is presented. Temperature and pressure for the SFE extraction were optimized prior to the experimental extractions. The extracts obtained using the two methods were very similar in composition, but SFE yielded better relative standard deviations and avoided the thermal degradation or solvent contamination of samples.     

Single-step extraction and cleanup of bisphenol A in soft drinks by hemimicellar magnetic solid phase extraction prior to liquid chromatography/tandem mass spectrometry

Hemimicelles of tetradecanoate chemisorbed onto magnetic nanoparticles (MNPs) are here proposed as a sorbent for the single-step extraction and cleanup of bisphenol A (BPA) in soft drinks. The purpose of this work was to develop a simple, rapid and low-cost sample treatment suitable to assess the human exposure to BPA from this type of high consumption food. The nanoparticles were easily coated by mixing commercially available magnetite of 20–30 nm mean particle diameter with tetradecanoate at 85 °C for 30 min. The extraction/cleanup procedure involved stirring the samples (3 mL) with 200 mg of tetradecanoate-coated MNPs for 20 min, isolating the sorbent with a Nd–Fe–B magnet and eluting BPA with methanol. The extraction efficiency was not influenced by salt concentrations up to 1 M and pH values over the range 4–9. No cleanup of the extracts was needed, and the method proved matrix-independent. The extracts were analyzed by liquid chromatography, electrospray ionization tandem mass spectrometry. Quantitation was performed by internal standard calibration using BPA-¹³C₁₂. The limit of quantitation obtained for the method, 0.03 ng mL⁻¹, was below the usual range of concentrations reported for BPA in soft drinks (0.1–3.4 ng mL⁻¹). The proposed method was successfully applied to the determination of BPA in different samples acquired from various supermarkets in southern Spain; the concentrations found ranged from 0.066 to 1.08 ng mL⁻¹. Recoveries from samples spiked with 0.33 ng mL⁻¹ of BPA ranged from 91% to 105% with relative standard deviations from 3% to 8%.     

Microwave-assisted extraction versus Soxhlet extraction in the analysis of 21 organochlorine pesticides in plants

A method to determine 21 organochlorine pesticides in vegetation samples using microwave-assisted extraction (MAE) is described and compared with Soxhlet extraction. Samples were extracted with hexane–acetone (1:1, v/v) and the extracts were cleaned using solid-phase extraction with Florisil and alumine as adsorbents. Pesticides were eluted with hexane–ethyl acetate (80:20, v/v) and determined by gas chromatography and electron-capture detection. Recoveries obtained (75.5–132.7% for Soxhlet extraction and 81.5–108.4% for MAE) show that both methods are suitable for the determination of chlorinated pesticides in vegetation samples. The method using microwave energy was applied to grass samples from parks of A Coruña (N.W. Spain) and to vegetation from the contaminated industrial area of Torneiros (Pontevedra, N.W. Spain).     

Activity volcano plots for the oxygen reduction reaction using FeN4 complexes: From reported experimental data to the electrochemical meaning

Electrochemistry and electrochemical experiments are powerful tools for obtaining information about the thermodynamics and kinetics of electrochemical reactions. In electrocatalysis, these two parameters are often framed together to improve the understanding of the interactions of a catalyst and a reactant. Generally, “volcano-type” correlations are composed to compare similar catalysts. In this type of correlation, kinetic versus thermodynamic parameters are juxtapose to identify the most active catalyst positioned at the top of the volcano trend. In this work, we delve into the obtaining of this type of correlations to clarify the significance and utility. In particular, the study of the oxygen reduction reaction (ORR) has been selected due to its importance in energy conversion devices such as fuel cells and metal-air batteries.     

Classification of extra virgin olive oils according to the protected designation of origin, olive variety and geographical origin

A headspace-mass spectrometry (HS-MS) coupling designed for the sensory characterization and classification of extra virgin olive oil on the basis of its protected designation of origin, olive variety and geographical origin is reported. The procedure involves the headspace generation and the direct injection of the homogenized gaseous phase into a mass spectrometer through a transfer line. The results obtained were chemometrically treated to achieve the best model capable of discriminating between the different olive oil categories. For this purpose, several procedures for variables selection, data pretreatments and unsupervised techniques were evaluated. In addition, K-nearest neighbor and soft independent modeling of class analogy algorithms were employed to the classification models building. Taking into account the prediction results obtained (ca. 87% of samples correctly classified and a specificity of ca. 97%), it can be concluded than the HS-MS coupling is, with an adequate chemometric treatment, an appropriate technique for routine control.     

Synthesis and Characterization of Di‐ and Tricarbonylhydridomanganese(I) Complexes

Hydrido complexes [MnH(CO)₃L^1–3] [L¹ = 1,2‐bis‐(diphenylphosphanoxy)‐ethane ( 1 ); L² = 1,2‐bis‐(diisopropylphosphanoxy)ethane ( 2 ); L³ = 1,3‐bis‐(diphenylphosphanoxy)‐propane ( 3 )] were prepared by treating [MnH(CO)₅] with the appropriate bidentate ligand by heating to reflux. Photoirradiation of a toluene solution of complexes 1 and 2 in the presence of PPh_n(OR)_3–n (n = 0, 1; R = Me, Et) leads to the replacement of a CO ligand by the corresponding monodentate phosphite or phosphonite ligand to give new hydrido compounds of formula [MnH(CO)₂(L^1–2)(L)] [L = P(OMe)₃ ( 1a – 2a ); P(OEt)₃ ( 1b – 2b ); PPh(OMe)₂ ( 1c – 2c ); PPh(OEt)₂ ( 1d – 2d )]. All complexes were characterized by IR, ¹H, ¹³C and ³¹P NMR spectroscopy. In case of compounds 2 and 3 , suitable crystals for X‐ray diffraction studies were isolated.     

Electrodeposited Pt-Ir electrodes: characterization and electrocatalytic activity for the reduction of the nitrate ion

The activity of Pt-Ir deposits on titanium for the reduction of the nitrate ion in 0.5 M perchloric acid was studied. The electrodes were characterized by SEM-EDAX, XPS and cyclic voltammetry. The activity of the electrodes for the nitrate reduction depended on the Pt-Ir ratio. Repetitive cyclic voltammograms produced an enrichment of the electrode surface with Ir and a decrease of the catalytic activity. A synergistic effect in the electrodes with low iridium content is discussed. Received: 2 June 1997 / Accepted: 28 August 1997     

On-line complexation/cloud point preconcentration for the sensitive determination of dysprosium in urine by flow injection inductively coupled plasma–optical emission spectrometry

An on-line dysprosium preconcentration and determination system based on the hyphenation of cloud point extraction (CPE) to flow injection analysis (FIA) associated with ICP-OES was studied. For the preconcentration of dysprosium, a Dy(III)-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex was formed on-line at pH 9.22 in the presence of nonionic micelles of PONPE-7.5. The micellar system containing the complex was thermostated at 30 degrees C in order to promote phase separation, and the surfactant-rich phase was retained in a microcolumn packed with cotton at pH 9.2. The surfactant-rich phase was eluted with 4 mol L(-1) nitric acid at a flow rate of 1.5 mL min(-1), directly in the nebulizer of the plasma. An enhancement factor of 50 was obtained for the preconcentration of 50 mL of sample solution. The detection limit value for the preconcentration of 50 mL of aqueous solution of Dy was 0.03 microg L(-1). The precision for 10 replicate determinations at the 2.0 microg L(-1)Dy level was 2.2% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the preconcentration system for dysprosium was linear with a correlation coefficient of 0.9994 at levels near the detection limits up to at least 100 microg L(-1). The method was successfully applied to the determination of dysprosium in urine.     

Antibacterial Activity of Biosynthesized Selenium Nanoparticles Using Extracts of Calendula officinalis against Potentially Clinical Bacterial Strains

The use of selenium nanoparticles (SeNPs) in the biomedical area has been increasing as an alternative to the growing bacterial resistance to antibiotics. In this research, SeNPs were synthesized by green synthesis using ascorbic acid (AsAc) as a reducing agent and methanolic extract of Calendula officinalis L. flowers as a stabilizer. Characterization of SeNPs was performed by UV-vis spectrophotometry, infrared spectrophotometry (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM) techniques. SeNPs of 40–60 nm and spherical morphologies were obtained. The antibacterial activity of marigold extracts and fractions was evaluated by disk diffusion methodology. The evaluation of SeNPs at different incubation times was performed through the colony-forming unit (CFU) count, in both cases against Serratia marcescens, Enterobacter cloacae, and Alcaligenes faecalis bacteria. Partial antibacterial activity was observed with methanolic extracts of marigold leaves and flowers and total inhibition with SeNPs from 2 h for S. marcescens, 1 h for E. cloacae, and 30 min for A. faecalis. In addition, SeNPs were found to exhibit antioxidant activity. The results indicate that SeNPs present a potentiated effect of both antimicrobial and antioxidant activity compared to the individual use of marigold extracts or sodium selenite (Na₂SeO₃). Their application emerges as an alternative for the control of clinical pathogens.     

Cloud point preconcentration prior to capillary zone electrophoresis: simultaneous determination of platinum and palladium at trace levels

The incorporation of a cloud point extraction (CPE) step prior to capillary electrophoresis (CE) for simultaneously determining platinum and palladium at sub-microg/L levels is presented and evaluated. The analytes were extracted as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complexes, at pH 2.0, mediated by micelles of the nonionic surfactant polyethyleneglycolmono-p-nonylphenyl ether (PONPE 7.5). The separation-determination step was developed from 150 microL of the extracted surfactant-rich phase diluted with 50 microL of acetonitrile (ACN). An exhaustive study of the variables affecting the cloud point extraction with PONPE 7.5 and the CZE step was done. The type and composition of the background electrolytes (BGEs) were investigated with respect to separation selectivity, reproducibility, and stability. A BGE of 50 mM monobasic sodium phosphate containing 30% ACN, pH 4.53 was found to be optimal for the separation of metal chelates. Detection was performed at 576 nm. An enrichment factor of 250 was obtained for the preconcentration of 50 mL of sample solution. The detection limits for the preconcentration of 50 mL of sample were 0.04 microg/L for Pt and 0.08 microg/L for Pd. As an analytical demonstration, ultratrace concentrations of platinum and palladium were conveniently quantitated in spiked water and urine samples.