Fundamental Methods for the Phase Transfer of Nanoparticles

The utilization of nanoparticles for a variety of applications has raised much interest in recent years as new knowledge has emerged in nanochemistry. New and diverse methods for synthesis, characterization, and application of these particles have been discovered with differing degrees of ease and reproducibility. Post-synthetic modification of nanoparticles is often a required step to facilitate their use in applications. The reaction conditions and chemical environment for the nanoparticle synthesis may not support or may conflict with further reactions. For this reason, it is beneficial to have phase transfer methods for nanoparticles to allow for their dispersion in a variety of solvents. Phase transfer methods are often limited in the types and sizes of particles that can be effectively dispersed in an immiscible solvent. Currently, general transfer methods for a wide variety of nanoparticles have not been identified. New routes for phase transfer allow for utilization of a larger range of particles in applications which were previously limited by solubility and reactivity issues. In this work, we will describe the fundamental methods for the phase transfer of metallic nanoparticles. We will look at the major problems and pitfalls of these methods. The applications of phase transfer will also be reviewed, mainly focusing on catalysis and drug delivery.     

Synthesis and characterization of toluene-3,4-dithiolatoantimony(III) derivatives with some oxygen and/or sulphur donor ligands

Replacement reactions of toluene-3,4-dithiolatoantimony(III) chloride with oxygen and/or sulphur donor ligands like benzoic acid, thiobenzoic acid, thioacetic acid, phenol, thiophenol, sodium salicylate and thio glycolic acid in 1:1 molar ratio as well as disodium oxalate in 2:1 molar ratio in refluxing anhydrous benzene yielded toluene-3,4-dithiolatoantimony(III) mono oxo and/or thio carboxylic or phenolic derivatives of the general formula {R = OOCC₆H₅, SOCC₆H₅, SOCCH₃, OC₆H₅, SC₆H₅, OOCC₆H₄(OH) and SCH₂COOH} and

Full-size image (3K)

These newly synthesized derivatives are yellow and brown solids/liquids and are soluble in common organic solvents like benzene, chloroform, dichloromethane, etc. These derivatives have been characterized by melting point determination, molecular weight determination, elemental analysis (C, H, S and Sb), spectral {UV, IR and NMR (¹H and ¹³C)} and thermal (TGA, DTA and DSC) studies.     

Sequestration of amitriptyline by liposomes

We study the uptake of amitriptyline, which is a common cause of overdose-related fatalities, in aqueous solutions by 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes and liposomes composed of a mixture of DMPC and 1,2-dioleoyl-sn-glycero-3-[phospho-rac(1-glycerol)] (DOPG) lipids. The effect of drug concentration, liposomal charge, pH, salt, and protein presence on the drug uptake is investigated using two different methodologies, a precipitation and a centrifugation method. Furthermore, the time scale of the drug uptake is studied through qualitative observations at high pH and through conductivity measurements at neutral pH and found to be <5 s. The results of the quantitative studies show that the fractional drug uptake decreases with increasing drug concentration, and for a given concentration it increases with the pH and decreases in the presence of salt. We find that a larger amount of drug is sequestered by negatively charged liposomes (those containing DOPG) than liposomes with no net charge (DMPC). We speculate that the mechanism of drug uptake is due to both electrostatic interactions as well as hydrophobic effects. The fractional uptake by DMPC:DOPG in a 70:30 ratio is as high as 95% in water and about 90% in physiological buffer. The fractional uptake is also measured in presence of 2% (w/w) bovine serum albumin (BSA), which is approximately the protein concentration in the intercellular fluid. In presence of protein the fractional uptakes by 70:30 DMPC:DOPG liposomes and 50:50 DMPC:DOPG liposomes are 82 and 90%, respectively, at 125 muM drug amitriptyline. In the absence of liposomes, 67% of the drug is taken up by the protein in a 2% (w/w) BSA, 125 muM amitriptyline solution. Thus, addition of 50:50 DMPC:DOPG liposomes reduces the free drug concentration by a factor of about 3.5, making them attractive candidates for drug detoxification.     

Influence of physical and chemical heterogeneity shape on thin film rupture

It is known that the breakup times for thin liquid films on solid surfaces can be substantially smaller if the surface is heterogeneous, either chemically or physically. In this paper we explore issues related to the effect of the shape of the physical and chemical heterogeneities on the breakup time and the thinning behavior. We consider two shapes, sinusoidal and exponential, for both physical and chemical gradients and compare the breakup times for these two different forms of gradients. Furthermore, the wavelength of the sinusoidal gradients and the length scale of the exponential gradients are varied and the effects of these on the breakup times and the film evolution are determined. For the sinusoidal gradients, we also obtain analytical results for shape evolution that are valid at short times and for small amplitude perturbation of the physical/chemical heterogeneities. The fastest growing modes are determined for spinodal breakup and also for both shapes (sinusoidal and exponential) of physical and chemical heterogeneities. The breakup times for the fastest growing modes from the linear and the nonlinear studies are compared for spinodal breakup and these results are also compared with those for both chemical and physical heterogeneities, of both sinusoidal and exponential shapes. Results show that the presence of heterogeneities, in general, accelerates the breakup of the film. In the linear regime, the growth rates are the same for the chemical and physical heterogeneities and spinodal breakup, and the effect of the heterogeneities is manifested as increased amplitude of initial perturbation. The effect of the chemical and physical heterogeneities dominate the film dynamics at early times, becoming less important at later times. The growth rates and equivalently the breakup times for the films on heterogeneous surfaces depend on the length scale over which physical/chemical gradients occur, and as the length scale approaches zero, which implies that the gradients become very steep, the effect of the heterogeneities on the breakup times becomes small.     

Effect of NaClO4 concentration on electrolytic behaviour of corn starch film for supercapacitor application

Polymer electrolyte has seen tremendous growth after works of Fenton & Armand, and energy devices are being produced at commercial level. Today’s social lifestyle needs miniaturized energy devices at every step of life; consequently, they add up to chemical garbage of the world. The sustainable development in the field needs eco-friendly energy devices. Hence, starch (being at low cost, abundant in nature and eco-friendly) has received great scientific attention. In recent past, many attempts have been made to modify the various starches to get fast ion-conducting materials. In our laboratory, also, wheat, potato, rice and arrowroot starches have been modified with different sodium salts, and in each case, considerably high-conducting (>10⁻³ S/cm) films have been found. In present case, also, a high-conducting transparent film (10⁻² S/cm) is obtained with corn starch and NaClO₄ salt after being crosslinked with glutaraldehyde (GA). Bode plots (both phase and magnitude), capacitive-response plot, capacitive-frequency plots and linear sweep voltammetry curves are analysed to explain the possibility of using the prepared electrolyte in capacitive device. The larger electrochemical stability window (ESW) ~ 2.4 V and smaller ion relaxation time ~ 65 μs make it a potential candidate for device fabrication. The equivalent series resistance is ~6.252 Ω for 0.8-mm-thick sample.

     

Volatile constituents of Origanum vulgare L., 'thymol' chemotype: variability in North India during plant ontogeny

Essential oils derived from six different phenophases, namely early vegetative stage, late vegetative stage, early flowering stage, full flowering stage (FFS), late flowering stage and seed shattering stage of Origanum vulgare L. grown in Kumaon region of Uttarakhand, India were investigated by GC and GC-MS. A total of 38 constituents, representing 97.4-99.7% of the total oil composition, were identified. Major components of oils were thymol (40.9-63.4%), p-cymene, (5.1-25.9%), γ-terpinene (1.4-20.1%), bicyclogermacrene (0.2-6.1%), terpinen-4-ol (3.5-5.9%), α-pinene (1.6-3.1%), 1-octen-3-ol (1.4-2.7%), α-terpinene (1.0-2.2%), carvacrol (<0.1-2.1%), β-caryophyllene (0.5-2.0%) and β-myrcene (1.2-1.9%). Thymol, terpinen-4-ol, 3-octanol, α-pinene, β-pinene, 1,8-cineole, α-cubebene and (E)-β-ocimene were observed to be higher during FFS. The study showed that plant stage had a significant effect on the essential oil content and composition of O. vulgare grown in the hilly tracks of Northern India.     

Amberlyst-15? in PEG: A novel catalytic system for the facile and efficient one-pot synthesis of benzothiazolo-[2,3-b]-quinazolinone derivatives

A simple and convenient approach for the synthesis of tetraheterocyclic benzothiazolo-[2,3-b]-quinazolin-1-ones has been developed utilizing the MCR methodology, which involves the condensation of 2-aminobenzothiazole, cyclic-diketones and various aldehydes using Amberlyst-15 in PEG 400 as an environmentally benign and reusable catalyst system. Environmental benignity, recyclability, cost-effectiveness, easy workup and excellent yields are the major attributes of this one-pot procedure.     

Enhanced light harvesting efficiencies of bis(ferrocenylmethyl)-based sulfur rich sensitizers used in dye sensitized TiO2 solar cells

In this work, the photosensitizing properties of ferrocene (Fc)-based compounds FcCH(2)CS(3)CH(2)Fc (1) and FcCH(2)SSCH(2)Fc (2) were investigated and significant enhancement in the light harvesting efficiency was observed compared to those achieved with previously reported compounds from our lab. The compounds were fully characterized by spectroscopy and X-ray crystallography, and their electrochemical properties studied. DSSCs based on these dyes display efficiencies comparable to those of a standard cell based on N719 under similar experimental conditions. These studies demonstrate that ferrocenyl-based sulfur rich compounds with proper orientation of the Fc groups assisted via suitable linkers, together with desired redox properties and visible region electronic absorption features could constitute a new class of photosensitizers targeting light driven reactions.     

Transport of topical anesthetics in vitamin E loaded silicone hydrogel contact lenses

Transport of surface active anesthetic drugs through silicone hydrogel contact lenses containing nanosized vitamin E aggregates is explored for achieving extended anesthetics delivery. Commercial silicone hydrogel contact lenses release most ophthalmic drugs including local anesthetics for only a few hours, which is not adequate. Here we focus on creating dispersion of highly hydrophobic vitamin E aggregates in the lenses as barriers for drug diffusion for increasing the release durations. This approach has been shown previously to be successful in extending the release durations for some common hydrophilic ophthalmic drugs. The topical anesthetic drugs considered here (lidocaine, bupivacaine, and tetracaine) are hydrophilic at physiologic pH due to the charge, and so these cannot partition into the vitamin E barriers. However, these surface active drug molecules adsorb on the surface of the vitamin E barriers and diffuse along the surface, leading to only a small decrease in the effective diffusivity compared to non-surface-active hydrophilic drugs. The drug adsorption can be described by the Langmuir isotherm, and measurements of surface coverage of the drugs on the vitamin E provide an estimate of the available surface area of vitamin E, which can then be utilized to estimate the size of the aggregates. A diffusion controlled transport model that includes surface diffusion along the vitamin E aggregates and diffusion in the gel fit the transport data well. In conclusion, the vitamin E loaded silicone contact lens can provide continuous anesthetics release for about 1-7 days, depending on the method of drug loading in the lenses, and thus could be very useful for postoperative pain control after corneal surgery such as the photorefractive keratectomy (PRK) procedure for vision correction.     

Laccase production and enzymatic modification of lignin by a novel Peniophora sp

A novel laccase producing Basidiomycete Peniophora sp. (NFCCI-2131) was isolated from pulp and paper mill effluent. The optimal temperature and initial pH for laccase production by the isolate in submerged culture were found to be 30 and 4.6° C, respectively. Maltose (20 g l⁻¹) and tryptone (1.0 g l⁻¹) were the most suitable carbon and nitrogen sources for laccase production. Cu²⁺ (1.0 mM) and veratryl alcohol induced maximum laccase production giving 6.6 and 6.07 U/ml laccase activity, respectively. Under optimised culture conditions, 7.6 U/ml activity was obtained, which was 2.4 times higher than that was achieved in basal medium. An evaluation of the delignification efficiency of the crude enzyme in the presence of redox mediators [2,2’-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) and (1-hydroxybenzotriazole)] revealed structural changes in lignin and existence of many active centres for both chemical and biological degradation of lignin following enzymatic treatment.