Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Temperature dependent electrical conductivity of polyaniline/Y2O3 composites

Composites of polyaniline with yttrium oxide (Y₂O₃) nanoparticles have been prepared by chemical polymerizations method by increasing the weight percentage of yttrium oxide. X-Ray diffraction (XRD) and Fourier Transform Infrared Spectra (FTIR) were used to characterize the composites. XRD and FTIR pattern indicate that Polyaniline (PANI) is intercalated into the layers of Y₂O₃ nanoparticles successfully by in situ polymerization and therefore the degree of crystallinity increases due to crystalline of yttrium oxide nanoparticles. The scanning electron micrographs (SEM) also confirm the formation of dual phase of platelet as well as of flaky structure in PANI-Y₂O₃. Temperature dependant DC conductivity showed three dimensional variable ranges hopping (3D VRH) model. Activation energy, density of states and hopping length are calculated and found to be influenced by intercalating PANI into the layers of Y₂O₃ clay.     

Inside-Needle Extraction Method Based on Molecularly Imprinted Polymer for Solid-Phase Dynamic Extraction and Preconcentration of Triazine Herbicides Followed by GC–FID Determination

An inside-needle extraction method was developed through thermal polymerization of atrazine-molecularly imprinted polymer (MIP) on the internal surface of a stainless steel hollow needle, which was oxidized and silylated. The fabricated coating (MIP layer) for the needle was durable and showed very good chemical and thermal stability. It could be mounted on a glass syringe and be directly coupled with gas chromatographic (GC) systems. The parameters being effective on the coating and extraction processes, namely nature of oxidizing agent, silylation time, nature and amount of porogen, template-to-MIP components ratio, polymerization time and temperature, sample volume, flow rate, pH and ionic strength of the sample were investigated and optimized. The extraction needle showed high selectivity as well as a great extraction capacity for triazines. The extraction of atrazine, simazine, cyanazine, ametryn, prometryn and terbutryn using the fabricated extraction needle and followed by GC analysis resulted in detection limits of 2.6, 21, 24, 32, 38 and 42 ng mL⁻¹, respectively. The fabricated needle proved to be applicable to the analysis of real samples by comparing the results obtained for non-spiked and spiked samples of grape juice, tap water and groundwater.

     

An investigation of Forex market efficiency based on detrended fluctuation analysis: A case study for Iran

The efficient market hypothesis (EMH) states that asset prices fully reflect all available information. As a result, speculators cannot predict the future behavior of asset prices and earn excess profits at least after adjusting for risk. Although initial tests of the EMH were performed on stock market data, the EMH was soon applied to other markets including foreign exchange (FX). This study uses the detrended fluctuation analysis (DFA) technique to test 01:12:2005–18:04:2010 Iranian Rial/US Dollar exchange rate time series data to see if it can be explained by the weak form of the EMH. Moreover, to determine changes in the degree of inefficiency over time, the whole period has been divided into four subperiods. The study shows that the Iranian Forex market (the Rial/Dollar case) is weak-form inefficient over the whole period and in each of the subperiods. However, the degree of inefficiency is not constant over time. The findings suggest that profitable risk-adjusted trades could be made using past data.     

Synthesis and characterization of A2 + B3 type hyperbranched aromatic-aliphatic polyester with carboxyl end groups

New types of carboxyl-terminated hyperbranched polyesters (HBPEs) with aromatic-aliphatic structure were synthesized by single step-melt polycondensation of adipic acid (as A2 monomer) and phloroglucinol (as B3 monomer) as a core via A₂ + B₃ approach, at three different monomer mole ratios (A₂/B₃ = 1: 1, 1.5: 1, 2: 1, respectively). FTIR spectroscopy indicated that the polymers contained hydroxyl groups, ester bonds, benzene ring, methyl and methylene groups, which were in agreement with the expected HBPEs. The HBPEs have inherent viscosities about 0.24 to 0.27 dL/g. The degree of branching of the HBPEs was estimated to be 0.45–0.49% by ¹H-NMR and ¹³C-NMR measurements. The melting temperature of HBPE-1, HBPE-2 and HBPE-3 were 154, 155 and 160°C respectively measured by differential scanning calorimetry (DSC). The synthesized polymers were thermally stable; the thermogravimetric analysis (TGA) measurement revealed that HBPEs had 10% weight loss at 310°C in nitrogen.     

Improvement of Nanoprecipitation Technique for Preparation of Gelatin Nanoparticles and Potential Macromolecular Drug Loading

An optimum nanoprecipitation technique for gelatin nanoparticles is established, based on aqueous gelatin solution and ethanolic solution containing stabilizer. Crosslinking with glutaraldehyde results in stable gelatine nanoparticles. Several factors such as the surfactant concentration, type of surfactant, type of nonsolvent and gelatin concentration are evaluated. Gelatin nanoparticles with 200–300 nm can be produced using 20–30 mg mL^?1 of gelatin and a minimum of 7% w/v stabilizer (Poloxamer 407 or 188). Furthermore, methanol and ethanol are good nonsolvents, whereas other nonsolvents such as acetone, isopropyl alcohol, and acetonitrile, result in phase separation and visible precipitates. The entrapment efficiency of fluorescein‐isothiocyanate (FITC)‐dextran as model drug was determined to 50% with no substantial effect on particle size. 80% of the drug is only released after enzymatic digestion.

     

Convenient Synthesis of 2-Aminothiophene Derivatives by Acceleration of Gewald Reaction Under Ultrasonic Aqueous Conditions

Under ultrasound irradiation and in the presence of H₂O/Et₂NH, ethyl cyanoacetate or malononitrile can combine with α-methylene carbonyl compounds and elemental sulfur to efficiently yield 2-aminothiophene derivatives within a few minutes. Products are easily obtained by simple filtration because of their spontaneous precipitation in the reaction mixtures.