Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Thermodynamic properties of aqueous organic mixtures near the critical demixing: Cases of 2,6-dimethylpyridine and of 2-isobutoxyethanol

Phase diagrams, volumes and heat capacities of aqueous mixtures of 2,6-dimethylpyridine (2,6-L) and 2-isobutoxyethanol (iBE) and activities of 2,6-L in aqueous mixtures were measured in the monophasic region near the lower critical solution temperature (LCST). With 2,6-L some measurement were also made just above the LCST. From the temperature dependence of these data, partial molar relative enthalpies (2,6-L), expansibilities and the temperature derivative of heat capacities were calculated and show that iBE undergoes a microphase transition at low concentration which is not related to the phase separation. On the other hand, the properties of 2,6-L in the water-rich region at temperatures well below the LCST indicates that this solute has only a slight tendency to associate. The heat capacities of 2,6-L show an important increase near the LCST. Such changes are not observed for iBE and other alkoxyethanols and amines since these systems already exist in the form of microphases; the partial molar properties of iBE near the LCST are nearly equal to the molar values of the pure liquid, and the changes in thermodynamic properties corresponding to the macroscopic phase transition, are therefore too small to be measured by the present techniques.     

Structural dependence of electron transfer to non-covalent polar complexes

Electron attachment to polar molecules and their non-covalent complexes can lead to different kinds of anions which differ from their excess electron localization. Spectroscopic methods for studying anion structures are reviewed. In many cases, the neutral and anion structures are identical and can be deduced from the electron attachment properties. Examples are given for complexes containing polar solvents or building blocks of biomolecules (nucleobases, amino acid residues...).     

Effect of molecular weight on the exponential growth and morphology of hyaluronan/chitosan multilayers: a surface plasmon resonance spectroscopy and atomic force microscopy investigation

The layer-by-layer growth of multilayer assemblies of two polysaccharides, the polyanion hyaluronan (HA) and the polycation chitosan (CH), was investigated using atomic force microscopy (AFM) and surface plasmon resonance (SPR) spectroscopy, with primary emphasis on the effect of the polysaccharide molecular weights on the film thickness and surface morphology. The HA/CH multilayers exhibit an exponential increase of the optical film thickness with the number of deposited bilayers. We show that the multilayer thickness at a given stage depends on the size of both CH, the diffusing polyelectrolyte, and HA, the non-diffusing species. Assemblies (12 bilayers) of high molecular weight polysaccharides (HA, 360,000; CH, 160,000) were twice as thick (approximately 900 nm vs approximately 450 nm) as those obtained with low molecular weight polymers (HA, 30,000; CH, 31,000), as assessed by AFM scratch tests. The exponential growth rate is the same for the high and low molecular weight pairs; the larger film thicknesses observed by SPR and by AFM arising from an earlier onset of the steep exponential growth phase in the case of the high molecular weight pair. In all cases, isolated islets form during the deposition of the first CH layer onto the underlying HA. Upon further film growth, individual islets coalesce into larger vermiculate features. The transition from distinct islands to vermiculate structures depends on the molecular weights of the polysaccharides and the lower molecular weight construct presents larger worm-like surface domains than the high molecular weight pair.     

2-Cyano Δ3piperideine VII1 : the condensation of 2-cyano Δ3piperideine with sodium dimethylmalonate catalyzed by ZnCl2 or zero valent palladium and platinum complexes

ZnCl₂, Pd (PØ₃)₄ and Pt(PØ₃)₄ were found to be effective catalysts for the condensation of sodium dimethyl malonate with 2-cyano Δ³piperideine $\text{1}$ a–d.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Determination of the pH of binary mobile phases for reversed-phase liquid chromatography

The measurement of pH in chromatographic mobile phases has been a constant subject of discussion during many years. The pH of the mobile phase is an important parameter that determines the chromatographic retention of many analytes with acid-base properties. In many instances a proper pH measurement is needed to assure the accuracy of retention-pH relationships or the reproducibility of chromatographic procedures. Three different methods are common in pH measurement of mobile phases: measurement of pH in the aqueous buffer before addition of the organic modifier, measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with standard solutions prepared in the same mobile phase solvent, and measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with aqueous standard solutions. This review discusses the different pH measurement and calibration procedures in terms of the theoretical and operational definitions of the different pH scales that can be applied to water-organic solvent mixtures. The advantages and disadvantages of each procedure are also presented through chromatographic examples. Finally, practical recommendations to select the most appropriate pH measurement procedure for particular chromatographic problems are given.     

Dissociation constants of phenols in methanol--water mixtures

A preferential solvation model that relates solute properties with solvent composition in binary mixtures has been applied to the dissociation pKa values of a set of 28 substituted phenols in methanol-water mixtures. The parameters of the model allow estimation of the pKa value of each phenol for any methanol-water composition. Moreover, it is demonstrated that the pKa values of the whole set of phenols at any methanol-water composition are linearly related to the pKa values of the phenols in water. Equations that relate the correlations' slope and intercept values with the solvent composition have been derived and tested with the set of phenols. The general parameters obtained for these equations allow an accurate calculation of the pKa value of any phenol, even of those not included in the original set, at any methanol-water composition solely from the pKa value of the phenol in water. These calculated pKa values can be used for quantitative structure-HPLC retention relationships. The method is tested by comparison of the calculated pKa values with the HPLC determined pKa values of 26 phenols in a polymeric column with a 50% methanol as mobile phase.     

Development and validation of a high-performance liquid chromatographic method for the determination of clomazone residues in surface water

A method is described for the determination of clomazone residues in surface water by high-performance liquid chromatography with UV detection. The method involves solid-phase extraction with C18 extraction tubes. Clomazone was separated on a C18 column with a mobile phase of methanol-water (65:35, v/v) at pH 4.0 and a flow-rate of 1.0 ml/min. After optimization of the extraction and separation conditions, the method was validated. The method developed can be used for determination of clomazone in surface water, at the limit of 0.1 mcirog/l set by the European Union drinking water directive, with a 400-fold preconcentration.     

PMR-Spektren einiger Alkoxy-9-chlor-6-nitroacridine

The spectra of some 9-chloro-6-nitroacridines with methoxy substituents in position 1,4; 2,4; 3,4; 2,3; and ethoxy substituents in positions 1, 2, 3, were recorded. The influence of electron releasing alkoxy groups and electron withdrawing nitro groups on chemical shifts of protons in the 9-chloroacridinic cycle was discussed and PMR parameters were determined, comparatively with those of acridine and 9-chloroacridine. Good agreement between calculated and experimental values is observed. The spectrum of 9-chloro-1,2,3-triethoxyacridine shows for the four protons of the ringC. (H-5, H-6, H-7, H-8) anAMNX coupling pattern whose parameters were determined.