Multivariate statistical analysis approach to assess groundwater quality in two selected mandals of Vizianagaram district,Andhra Pradesh,India

Groundwater quality is the major concern all over the world. Natural processes and manmade activities are the prime reasons for the contamination of available water resources. It is crucial to assess the quality of groundwater in areas surrounded by various industries. The present study was carried out to assess the groundwater quality during pre-monsoon and post monsoon seasons of 2016, in two mandals of Vizianagaram district of Andhra Pradesh via multivariate statistical analysis and water quality index method. The present work gains importance in light of the construction of proposed international airport at Bhohapuram and the existence of various industries in Pusapatirega mandal. A total of thirty-seven villages, eighteen from Bhogapuram mandal and seventeen from Pusapatirega mandal were selected for the present study. Factor analysis, linear regression analysis, correlation matrix analysis and cluster analysis tools were used to emphasize the parameters influencing quality of water in the chosen study area. From the analysis reports, it was found that the groundwater of the two mandals under investigation was strongly influenced by EC, TDS, total hardness(TH), Ca⁺², Mg⁺² and K⁺. During the two seasons under study, the water quality index value was found to be greater than 100 indicating that the water is unfit for human consumption. Concentration of Ca⁺², Mg⁺² and K⁺ were found to be beyond the permissible limits prescribed by BIS (2012). Dissolution of calcium and magnesium bearing minerals, mixing of industrial and household wastes may be the reasons for elevated concentration levels of these parameters.     

Nelumbo nucifera leaves as source of water-repellent wax: Extraction through polar and non-polar organic solvents

Nelumbo nucifera leaves are rich source of natural wax possessing super-hydrophobic properties. It provides protection to them from ecological turbulences and climatic wear and tear. In this study, various experiments have been conducted to observe the yield of extraction and the determination of various functional groups, which are present in natural wax, derived from Nelumbo nucifera leaves. The natural wax has been extracted from lotus leaves through non-polar (hexane) and polar (ethanol) solvent via different extraction methods. The superhydrophobic wax has been successfully extracted with hexane. Whereas, ethanol did not extract the water-repellent wax of lotus leaf. Considering the cumulative amount, i.e. (desired + undesired), the maceration shows the extraction of 2.9% (%w/w, through hexane) and 10.2% (%w/w, through ethanol), while it was found 2.5% (%w/w, cycle period 15 min) and 9.0% (%w/w, cycle period 26 min) respectively, in case of Soxhlet extraction technique. For this specific case of natural wax recovery from biomass (lotus leaf), the maceration (traditional method) resulted a little bit superior extraction yield in comparison to the Soxhlet extraction method for extraction of crude wax. In the case of non-polar solvent (hexane), an extraction yield of 1.97% (%w/w) through maceration method was observed while in the case of non-polar solvent (ethanol), an extraction yield of 1.62% (%w/w) through Soxhlet extraction was observed. The TLC analysis on both types of extracts was performed. For the detection of various hydrocarbon chains in the crude wax extracts, FTIR was also performed. Topography of wax surface and wax-coated waterproof fabric was compared through SEM.     

Hydrothermal processing of waste pine wood into industrially useful products

An ongoing major outbreak of mountain pine beetle in Western Canada has provided a clear opportunity to utilize waste pinewood as a source of renewable energy. Therefore hydrothermal processing of waste pinewood as a feedstock for bio-oil and biochar production using subcritical and supercritical water technology was carried out in semi-batch mode to investigate the effect of pressure (200–400 bar) and temperature (300–400 °C) on the yield and composition of bio-oil. The pinewood samples have very high cellulose and hemicellulose content but low ash content and are thus a formidable feedstock for bioenergy production. The optimum conditions for the hydrothermal processing of the pinewood in a tubular reactor were found to be 400 °C and 250 bars with respect to biochar and bio-oil yield based on the highest calorific value analysis. Detailed characterization of bio-oil and biochar was performed using GCMS, NMR, SEM, calorific value, and elemental analysis, respectively. The critical components of bio-oil were found to be phenols, methoxyphenols, hydroxymethyl furfural (HMF), and vanillin, whereas as compared to the raw pine wood, the biochar was considerably lower H:C and O:C ratios than those of the unprocessed pinewood. The analyses of bio-oil by means of GCMS and ¹H NMR showed that it was mainly composed of heterocyclic compounds, phenols, aldehydes and acids.     

Synthesis and thermal evaluation of novel mono- and bis-adamantylated resorcinol-based phthalonitrile resins with enhanced solubility

Journal of Thermal Analysis and Calorimetry - Phthalonitrile (PN) resins are high-temperature-resistant thermosetting polymers which find applications in military as well as aerospace owing to...     

Electronic structures,bonding, and spin state energetics of biomimetic mononuclear and bridged dinuclear iron complexes: a computational examination

Structural Chemistry - Mononuclear and dinuclear iron complexes are found as key intermediates in many synthetic and biocatalytic reactions, since many of these species are transient and have high...     

Prediction of thermodynamic and surface properties of Pb−Hg liquid alloys at different temperatures

The thermodynamic properties, such as free energy of mixing, heat of mixing, activity and structural properties, such as concentration fluctuation in long wavelength limit, short-range order parameter of Pb–Hg liquid alloy at 600 K have been calculated using theoretical modelling. It has then been correlated with modified Butler model to compute the surface tension of the alloys at different temperatures. The Pb–Hg system at 600 K is found to be ordering at higher concentration of Pb.     

Investigation of viscoelastic focusing of particles and cells in a zigzag microchannel

Microfluidic particle focusing has been a vital prerequisite step in sample preparation for downstream particle separation, counting, detection, or analysis, and has attracted broad applications in biomedical and chemical areas. Besides all the active and passive focusing methods in Newtonian fluids, particle focusing in viscoelastic fluids has been attracting increasing interest because of its advantages induced by intrinsic fluid property. However, to achieve a well-defined focusing position, there is a need to extend channel lengths when focusing micrometer-sized or sub-microsized particles, which would result in the size increase of the microfluidic devices. This work investigated the sheathless viscoelastic focusing of particles and cells in a zigzag microfluidic channel. Benefit from the zigzag structure of the channel, the channel length and the footprint of the device can be reduced without sacrificing the focusing performance. In this work, the viscoelastic focusing, including the focusing of 10 μm polystyrene particles, 5 μm polystyrene particles, 5 μm magnetic particles, white blood cells (WBCs), red blood cells (RBCs), and cancer cells, were all demonstrated. Moreover, magnetophoretic separation of magnetic and nonmagnetic particles after viscoelastic pre-focusing was shown. This focusing technique has the potential to be used in a range of biomedical applications.     

Enantiopure Calcium Iminophosphonamide Complexes: Synthesis,Photoluminescence, and Catalysis

The synthesis of calcium complexes ligated by three different chiral iminophosphonamide ligands, L- H ( L =[Ph₂P{N(R)CH(CH₃)Ph}₂]), L′ -H ( L′ =[Ph₂P{NDipp}{N(R)CH(CH₃)Ph}]), (Dipp=2,6-ⁱPr₂C₆H₃), and L′′ -H ( L′′ =[Ph₂P{N(R)CH(CH₃)naph}₂]), (naph=naphthyl) is presented. The resulting structures [ L ₂Ca], [ L′ ₂Ca], and [ L′′ ₂Ca] represent the first examples of enantiopure homoleptic calcium complexes based on this type of ligands. The calcium complexes show blue–green photoluminescence (PL) in the solid state, which is especially bright at low temperatures. Whereas the emission of [ L′′ ₂Ca] is assigned to the fluorescence of naphthyl groups, the PL of [ L ₂Ca] and [ L′ ₂Ca] is contributed by long-lived phosphorescence and thermally activated delayed fluorescence (TADF), with a strong variation of the PL lifetimes over the temperature range of 5–295 K. Furthermore, an excellent catalytic activity was found for these complexes in hydroboration of ketones at room temperature, although no enantioselectivity was achieved.     

Application of the Redox-Transmetalation Procedure to Access Divalent Lanthanide and Alkaline-Earth NHC Complexes**

Divalent lanthanide and alkaline-earth complexes supported by N-heterocyclic carbene (NHC) ligands have been accessed by redox-transmetalation between air-stable NHC-AgI complexes and the corresponding metals. By using the small ligand 1,3-dimethylimidazol-2-ylidene (IMe), two series of isostructural complexes were obtained: the tetra-NHC complexes [LnI₂(IMe)₄] (Ln=Eu and Sm) and the bis-NHC complexes [MI₂(IMe)₂(THF)₂] (M=Yb, Ca and Sr). In the former, distortions in the NHC coordination were found to originate from intermolecular repulsions in the solid state. Application of the redox-transmetalation strategy with the bulkier 1,3-dimesitylimidazol-2-ylidene (IMes) ligand yielded [SrI₂(IMes)(THF)₃], while using a similar procedure with Ca metal led to [CaI₂(THF)₄] and uncoordinated IMes. DFT calculations were performed to rationalise the selective formation of the bis-NHC adduct in [SrI₂(IMe)₂(THF)₂] and the tetra-NHC adduct in [SmI₂(IMe)₄]. Since the results in the gas phase point towards preferential formation of the tetra-NHC complexes for both metal centres, the differences between both arrangements are a result of solid-state effects such as slightly different packing forces.     

Investigating microcrystalline cellulose crystallinity using Raman spectroscopy

Cellulose - Microcrystalline cellulose (MCC) is a semi-crystalline material with inherent variable crystallinity due to raw material source and variable manufacturing conditions. MCC crystallinity...