Sm3+掺杂Ba0.85Ca0.15Ti0.90Zr0.10O3无铅多功能铁电陶瓷的储能和光致发光性能

通过高温固相反应法制备了Ba_0.85Ca_0.15Ti_0.90Zr_0.10O₃∶xSm³⁺(BCTZ∶xSm³⁺,x=0.0%、0.2%、0.4%、0.6%、0.8%、1.0%,物质的量分数)陶瓷,系统研究了其微观形貌、铁电性能、储能性能和光致发光性能。研究表明,Sm³⁺掺入后,陶瓷平均晶粒大小明显下降,致密度显著提高。所有陶瓷均表现出典型的铁电性。BCTZ∶xSm³⁺陶瓷放电储能密度得到了极大的提高,BCTZ∶1.0% Sm³⁺陶瓷放电储能密度较纯BCTZ陶瓷可提高约49.0%。此外,在408 nm光的激发下,BCTZ∶xSm³⁺陶瓷在596 nm左右表现出强烈的橙红色发光,且发光强度相对可调性可达449%。     

基于二氧化硅胶体晶体薄膜和反射干涉光谱的蛋白冠监测方法

生物分子与纳米材料作用形成的"蛋白冠"影响纳米材料的物理和化学性质,目前缺少有效的原位实时技术监测蛋白冠的形成过程.本研究基于二氧化硅胶体晶体薄膜和反射干涉光谱法,研究了三种代表性血液蛋白质在二氧化硅纳米粒子表面的蛋白冠形成过程,结果表明这三种蛋白具有不同的蛋白冠形成过程及参数;研究了人血清白蛋白在三种表面曲率的二氧化...     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束,在使用的振动环境中,会因弯曲应力而导致破裂,影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上,得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数,使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

Dynamic relaxation process of a 3D super crystal structure in a Cu:KTN crystal

In this Letter,we report the existence and relaxation properties of a critical phenomenon on called a 3D super crystal that emerges at T=TC?3.5℃,that is,in the proximity of the Curie temperature of a Cu:KTN sample.The dynamics processes of a 3D super crystal manifest in its formation containing polarized nanometric regions and/or polarized clusters.However,with strong coupling and interaction of microcomponents,the characteristic relaxation time measured by dynamic light scattering demonstrates a fully new relaxation mechanism with a much longer relaxation time.As the relaxation mechanism of a relaxator is so-far undetermined,this research provides a novel perspective.These results can help structure a fundamental theory of ferroelectric relaxation.     

Organic Nanocrystals Based on a Solid-emission-tunable AIEgen for Cell Imaging

The development of fluorescent nanocrystals based on organic small molecules is of great importance in bioimaging due to the merits of easy modification,high brightness and excellent photostability,however suffering from the emission-detrimental aggregation-caused quenching(ACQ)effect.Herein,we successfully designed and synthesized an AIE-active di(N,N-dimethylaniline)-dibenzofulvene(named as NFTPE),which exhibits the crystallization-induced emission enhancement(CIEE)effect.Interestingly,two types of yellow-and orange-emissive crystals for NFTPE were obtained,exhibiting aggregation microenvironment-dependent emission tuning in the solid state.Single-crystal analysis and density functional theory(DFT)calculations reveal that different aggregation microenvironments result in the distinct molecular conformation for various emission.Excitingly,the crystallization of NFTPE in an aqueous solution under the assistance of amphiphilic PEG polymer matrices could be monitored in situ by the fluorescence changes,facilitating the preparation of NFTPE nanocrystals(NFTPE-NCs)by adjusting the aggregation microenvironment.The obtained NFTPE-NCs exhibit the superior performance in cell imaging in respect to high brightness,photostability,and biocompatibility,thus demonstrating the potential in bioimaging applications.     

超分子组装体激发态手性的响应性

圆偏振发光主要是指手性发光体系激发态的性质。由于其在信息加密、高分辨3D显示和智能传感器等领域的潜在应用而备受关注。圆偏振光除了可以通过物理方法获得,即使用线偏振片和四分之一波片的组合,还可以直接从具有光致发光或电致发光性质的手性材料中获得。目前研究者们已经开发了多种圆偏振发光材料,主要包括手性有机分子、手性金属配合物等小分子发光体系以及手性超分子组装体等复合体系。通过将手性组分与响应性功能基团结合而构筑的响应性自组装发光体系对实现智能圆偏振发光材料的发展起着重要作用。在这篇文章里,我们对手性超分子自组装发光体系对各种外界刺激的响应性能进行了总结和归纳,如光照、pH值、溶剂、温度、金属离子等。本综述通过对各种外部刺激对手性组装体激发态性能影响的总结和讨论,旨在进一步推动智能圆偏振发光材料在多学科领域的应用。     

Characterization of a pectic polysaccharide from the fruit of <Emphasis Type="Italic">Ziziphus jujuba</Emphasis>

A pectic polysaccharide was isolated from the fruits of Ziziphus jujuba Mill. cv. jinsixiaozao Hort. and its structure was characterized by acid hydrolysis, methylation, and NMR spectroscopies. The purified fraction Ju-B-7 had a molecular mass of over 2000 kDa. Chemical and spectroscopic analyses indicated that Ju-B-7 is composed mainly of α-1,4-linked D-galactopyranosyluronic acid and 1,2-linked L-rhamnose with a molar ratio of 8.1:1. It can significantly stimulate spleen cell proliferation in vitro (P<0.01, 10 μmg/mL). Published in Khimiya Prirodnykh Soedinenii, No. 4, pp. 311–312, July–August, 2007.     

三核铜(Ⅰ/Ⅱ)配合物[Cu(en)_2]·[Cu(pht)_2]_2的合成、晶体结构及与DNA相互作用的研究

报道了多核铜配合物[Cu(en)_2]·[Cu(pht)_2]_2(Hpht:苯妥英,即5,5-二苯基-2,2-咪唑烷酮;en:乙二胺)的溶剂热合成、晶体结构及其与DNA的相互作用.该晶体属三斜晶系,P_1~-空间群,晶胞参数:a=0.8453(2)nm,b=1.1878(3)nm,c=1.5674(4)nm,a=101.197(3)°,β=97.690(3)°,γ=103.283(3)°,V=1.476(6)nm~3,D_c=1.480 g/cm~3,Z=1,F(000)=679,μ=1.139nm~(-1),R_1=0.0402,wR_2=0.0962[I>2σ(Ⅰ)],GOF=1.035.XPS和X射线单晶衍射数据显示该配合物分子由混价铜组成,包括两个一价铜和一个二价铜,其中每个Cu(Ⅰ)分别与两个苯妥英配体提供的氮原子配位,N-Cu(Ⅰ)-N的夹角为177°,一个Cu(Ⅱ)与六个配位原子配位(CuN_4O_2),形成一个稍变形八面体结构.配合物与DNA相互作用研究表明,该配合物主要是以插入方式与小牛胸腺DNA结合.     

共聚法和嫁接法制备二茂铁杂化介孔材料及其催化性能

 以桥联硅氧烷 1,1'-双[(2-三乙氧基硅基) 乙基]二茂铁 (BTEF) 和正硅酸乙酯为前驱体, 以十六烷基三甲基溴化铵为结构导向剂, 采用共聚法制备了二茂铁功能化的周期介孔有机硅烷材料 (PMO-Fc). 同时以 BTEF 为修饰剂, 以甲苯为分散剂, 采用嫁接法制备了 Fc-MCM-41 杂化介孔材料. 采用 N2 物理吸附、X 射线衍射、透射电镜和红外光谱等手段对材料进行了表征, 评价了其催化苯羟化反应活性. 结果表明, PMO-Fc 具有有序的二维六方形孔道结构, 较大的比表面积和孔体积, 在苯羟化反应中表现出比 Fc-MCM-41 更高的催化活性, 苯酚的选择性和收率分别为 65.3% 和 20.2%.     

1H and 13C NMR assignments for two new angular furanocoumarin glycosides from Peucedanum praeruptorum

Two novel angular-type furanocoumarin glycosides, peucedanoside A (1) and peucedanoside B (2), along with a known compound apterin (3), were isolated from the roots of Peucedanum praeruptorum Dunn. Their chemical structures were determined by MS, NMR spectroscopy and chemical analysis. Complete assignments of the 1H and 13C NMR spectroscopic data were achieved by 1D and 2D NMR experiments including DEPT, HSQC, HMBC and ROESY.