Synthesis and properties of BaCe1−xYxO3−δ–BaWO4 composite protonic conductors

Barium cerate doped by trivalent rare earth metal ions is a potentially huge component of materials for electrochemical industry due to its high protonic conductivity. However, the poor chemical stability especially in the presence of CO₂, SO₂ or H₂O, resulting in decreasing the mechanical durability of obtained materials, limits their possible applications. The new approach towards stable ceramic protonic conductors with high electrical conductivity is presented. Thermal stability of yttrium doped (10 mol%) of BaCeO₃ was enhanced by forming the composite material BaCe_0.9Y_0.1O₃–BaWO₄ (10 mol% of BaWO₄). The synthesis was performed by solid-state reaction method. The detailed study of thermal decomposition of starting powders mixture was performed using thermogravimetry and differential thermal analysis (TG/DTA) techniques combined with Evolved Gas Analysis (EGA—mass spectrometry). Structure, phase composition and microstructure together with thermal stability of sintered materials were determined. The exposition tests were performed to characterise the stability of composites in carbon dioxide and water vapour-rich atmospheres. The samples were exposed to atmosphere containing CO₂/H₂O (7 % of CO₂ in air, 100 % RH) at temperature of 25 °C for 300 h. Thermal analysis supplied with mass spectrometry was applied to analyse the materials after the test. The results of this experiment showed better chemical resistance of composite material—BaCe_0.9Y_0.1O₃ with 10 mol% of BaWO₄ compared to single phase material.     

Viscoelastic properties and morphology of dicyanate ester/epoxy co-polymers modified with polysiloxane and butadiene–acrylonitrile rubbers

Dynamic mechanical analysis was conducted on specimens prepared from cyanate ester (CE) and epoxy (EP) resins cured together at various mass compositions. Increase of amount of epoxy resin in composition was shown to have a disadvantageous effect on glass transition temperature (T _g). It was shown that post-curing procedure was needed to produce a polymer matrix with a single glass transition relaxation, but increase in post-cure temperature up to 250 °C resulted in slight reduction in T _g for epoxy/cyanate copolymers. TG results proved that the presence of epoxy resin reduces thermal stability of the cyanate/epoxy materials. The neat CE and EP/CE systems containing 30 wt% of epoxy resin were modified using epoxy-terminated butadiene–acrylonitrile rubber (ETBN) and polysiloxane core–shell elastomer (PS). The scanning electron microscopy (SEM) results showed the existence of second phase of ETBN and PS modifiers. Only in the case of EP/CE composition modified with ETBN, well-dispersed second phase domains were observed. Analysis of SEM images for other CE- and EP/CE-modified systems revealed the formation of spherical aggregates.     

Estimation of the breakthrough volume of selected steroids for C‐18 solid‐phase extraction sorbent using retention data from micro‐thin layer chromatography

SPE method is a very popular technique, and is commonly used for the prepurification, concentration, and isolation of different organic compounds from variable matrices. In this work, the optimization of SPE process was carried out. The breakthrough volume of solid sorbents based on octadecylsilane was determined and three methods were compared: (1) calculation one – the breakthrough volume was calculated using retention factor k determined with micro‐TLC method, frontal analysis – (2) breakthrough volume was determined as volume of whole elution peak, and (3) breakthrough volume was determined as the center of peak gravity. For calculation method, the k values of key estrogens and progestogens were derived from the micro‐TLC experiment reported previously. By combining these three methods, we can point the start of elution, the maximum concentration of analyte in eluate, and the whole eluent volume, which is necessary to achieve an appropriate selectivity and high extraction recovery. Proposed calculation method allows to estimate the beginning of the steroid peak, when the analyte appears in the eluate flowing from the sorbent. Such observation advances the SPE optimization protocol that was described before and was based on the correlation between raw k_SPE and k_micro‐TLC data.     

A TLC Study of the lipophilicity of thirty-two acetylcholinesterase inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives

The lipophilicity of thirty-two novel acetylcholinesterase (AChE) inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives was studied by thin layer chromatography. The analyzed compounds were chromatographed on RP-18, RP-8, RP-2, CN and NH₂ stationary phases with dioxane — citric buffer pH 3.0 binary mobile phases containing different proportions of dioxane. R_M values for pure water were extrapolated from the linear Soczewiński-Wachtmeister equation and six compounds with known literature log P values were used as reference calibration data set for computation of experimental log P values. The obtained results were compared with computationally calculated partition coefficients values (AlogPs, AClogP, AlogP, MlogP, KOWWIN, XlogP2, XlogP3) by PCA and significant differences between them were observed.     

Micro-TLC Approach for Fast Screening of Environmental Samples Derived from Surface and Sewage Waters

In this work we demonstrated analytical capability of micro-planar (micro-TLC) technique comprising one and two-dimensional (2D) separation modes to generate fingerprints of environmental samples originated from sewage and ecosystems waters. We showed that elaborated separation and detection protocols are complementary to previously invented HPLC method based on temperature-dependent inclusion chromatography and UV-DAD detection. Presented 1D and 2D micro-TLC chromatograms of SPE (solid-phase extraction) extracts were optimized for fast and low-cost screening of water samples collected from lakes and rivers located in the area of Middle Pomerania in northern part of Poland. Moreover, we studied highly organic compounds loaded in the treated and untreated sewage waters obtained from municipal wastewater treatment plant “Jamno” near Koszalin City (Poland). Analyzed environmental samples contained number of substances characterized by polarity range from estetrol to progesterone as well as chlorophyll-related dyes previously isolated and pre-purified by simple SPE protocol involving C18 cartridges. Optimization of micro-TLC separation and quantification protocols of such samples were discussed from the practical point of view using simple separation efficiency criteria including total peaks number, log(product ΔhR _F), signal intensity and peak asymmetry. Outcomes of the presented analytical approach, especially using detection involving direct fluorescence (UV366/Vis) and phosphomolybdic acid (PMA) visualization are compared with UV-DAD HPLC-generated data reported previously. Chemometric investigation based on principal components analysis revealed that SPE extracts separated by micro-TLC and detected under fluorescence and PMA visualization modes can be used for robust sample fingerprinting even after long-term storage of the extracts (up to 4 years) at subambient temperature (?20 °C). Such approach allows characterization of wide range of sample components that are present in given extract in high and middle concentration range. Due to protocol simplicity and low cost of analysis this method can be useful for preliminary sample screening.     

One-Step Formation of N-Alkenyl-malonamides and N-Alkenyl-thiomalonamides from Carbamoyl Meldrum's Acids

A one-pot synthesis for the preparation of N-alkenyl-malonamides and N-alkenyl-thiomalonamides was developed. 5-[Hydroxy/mercapto(aryl/alkylamino)methylene]-2,2-dimethyl-1,3-dioxane-4,6-dione act as a source of ketenes that react with the tautomeric form of alkyl-(2-phenyl-propylidene)-amines. A possible [2 + 2] or [4 + 2] cycloaddition product of ketene to imines was not observed.     

Synthesis and structure determination of 2,3-diaryl-9,9-dioxo-1H-9-thia-1,4,4a,7,10-pentaazaphenanthrene-2-ols

3-Amino-1,1-dioxopyrido[4,3-e]-1,4,2-dithiazine has been synthesized and applied to the synthesis of 3-amino-2-(4-thioxo-1,4-dihydropyridin-3-ylsulfonyl)guanidine. The reaction of the aminoguanidine with the appropriate 1,2-diarylethane-1,2-diones afforded 2,3-diaryl-9,9-dioxo-1H-9-thia-1,4,4a,7,10-pentaazaphenanthrene-2-ol derivatives. The structure of these compounds, which represent a novel heterocyclic ring system, was confirmed on the basis of elemental analysis and spectroscopic data including COSY, NOESY, ROESY, HSQC, and HMBC.     

Comparison of Aqueous and 1-Octanol Solubility as well as Liquid–Liquid Distribution of Acyclovir Derivatives and Their Complexes with Hydroxypropyl-β-Cyclodextrin

The aim of the presented work is the comparison of aqueous and 1-octanol solubilities of different acyclovir derivatives and their hydroxypropyl-β-cyclodextrin inclusion complexes. The solubility measurements were carried out at different temperatures over the range 25–45 °C using water, 1-octanol, water saturated with 1-octanol, 1-octanol saturated with water, buffered aqueous solutions (pH = 5.5 and 7.0) and buffered aqueous solutions containing cyclodextrin as solvents. The aqueous solubilities of the compounds are very low but may be enhanced by complexation with hydroxypropyl-β-cyclodextrin, especially if the acyclovir derivatives have aromatic groups which may be included in the cyclodextrin cavity. The values of 1-octanol–water partition coefficients of acyclovir derivatives, obtained using extraction experiments, showed a similar sequence as the solubility results in 1-octanol. Additionally, some molecular mechanics and molecular dynamic calculations were performed to determine optimized structures of acyclovir derivative complexes with β-cyclodextrin treated as a model.     

Promoted ternary CuO-ZrO2-Al2O3 catalysts for methanol synthesis

Ternary CuO-ZrO₂-Al₂O₃ catalysts promoted by palladium or gold were prepared and tested in CO hydrogenation reaction at 260°C under elevated pressure (4.8 MPa). The promotion effect of palladium or gold addition on the physicochemical and catalytical properties of CuO-ZrO₂-Al₂O₃ catalysts in methanol synthesis (MS) was studied. The catalysts were characterized by BET, XRD, TPR-H₂, TPD-NH₃ methods. The BET results showed that the ternary system CuO-ZrO₂-Al₂O₃ had the largest specific surface area, cumulative pore volume and average pore size in comparison with the promoted catalysts. The yield of methanol can be given through the following sequence: 5%Pd/CuO-ZrO₂-Al₂O₃ > CuO-ZrO₂-Al₂O₃ > 2%Au/CuO-ZrO₂-Al₂O₃. We also found that the presence of gold or palladium on catalyst surface has strong influence on the reaction selectivity. The high selectivity of gold doped ternary catalyst is explained by the gold-oxide interface sites created on the catalyst surface and the acidity of those systems. The higher selectivity to methanol in the case of the palladium catalyst is explained by the spillover effect between Pd and CuO.      

Synthesis of Some Aminophosphonates Bearing N‐(Fluorophenyl)‐piperazynyl Moiety and Their Activity toward Serotonin Receptors

Syntheses of a series of compounds bearing a 1‐(fluorophenyl)piperazin‐4‐ylmethyl moiety, namely dialkyl 1‐(fluorophenyl)piperazin‐4‐ylmethyl phosphonates 3a–f , diethyl 2‐[1‐(fluorophenyl)piperazin‐4‐yl]‐ethyl phosphonates 4a,b , diethyl 3‐[1‐(4‐fluorophenyl)‐piperazin‐4‐yl]‐propyl phosphonate 5 , and di[1‐(fluorophenyl)piperazin‐4‐yl]methanes 6a,b were performed, and some of them were screened for their affinity for serotonin 5‐HT_1A, 5‐HT₆, and 5‐HT₇ receptors. Moderate interactions with these receptors were demonstrated.