Controlling cell attachment selectively onto biological polymer-colloid templates using polymer-on-polymer stamping

A new patterning approach using polymer-on-polymer stamping (POPS) has been developed to fabricate polymer-colloid templates for controlling selective cell attachment. In this paper, a polyamine surface patterned onto a poly(acrylic acid)/poly(allylamine hydrochloride) (PAA/PAH) cell resistant multilayer platform serves as a template for the deposition of close- or loose-packed colloidal particles. Peptides containing the RGD adhesion sequence were used to modify the PAH/colloid surface for specific cell attachment. Cell behavior was studied by varying colloidal packing array density, pattern geometry, and surface chemistry. It was found that loose-packed RGD-modified colloidal arrays enhance cell adhesion, as observed through the development of focal adhesion contacts and orientation of actin stress fibers, but close-packed colloidal arrays induce a rounded and nonadhesive cell morphology and yield a smaller number of attached cells. On loose-packed arrays, cells adjust their shapes to the pattern geometry when the stripe width is smaller than 50 microm and increase their extent of attachment when the concentration of surface RGD peptides is increased. This new biomaterials system allows the examination of cell behavior as a function of RGD surface distribution on the molecular to micrometer scale and reveals cellular response to different surface roughnesses.     

Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Spectroscopic investigation and thermal behavior of new carbonyl complexes [M(CO)4(N—N)(CuX)], (M = W,Mo; N—N = 2,2′-bipyridine, 1,10-phenanthroline; X = Cl,SCN)

[M(CO)₄(N—N)] reacts with CuCl to give new heterobimetallic metal carbonyls of the type [M(CO)₄(N—N)(CuCl)], M = W, Mo; N—N = 2,2-bipyridine (bipy), 1,10-phenanthroline (phen). Reactions of [M(CO)₄(N—N)(CuCl)] with NaSCN produced the series of complexes of general formula [M(CO)₄(N—N)(CuSCN)]. The i.r. spectral of all the bimetallic carbonyls exhibited the general four (CO) band patterns of the precursors. The u.v.–vis. spectral data for precursors and products showed bands associated with * (nitrogen ligands), dd (intrametal), as well as MLCT d* (nitrogen ligands) and MLCT d *(CO) transitions. The [M(CO)₄(N—N)(CuX)] (X = Cl, SCN) emission spectra showed only one band associated with the MLCT transition. The t.g. curves revealed a stepwise loss of CO groups. The initial decomposition temperatures of the [M(CO)₄(N—N)(CuX)] series suggest that the bimetallic compounds are indeed thermally less stable than their precursors, and the X-ray data showed the formation of MO₃, CuMO₄, Cu₂O and CuO as final decomposition products, M = W, Mo. The spectroscopic data suggests that the heterobimetallic compounds are polymeric.     

Interaction and lipid-induced conformation of two cecropin-melittin hybrid peptides depend on peptide and membrane composition

The interaction of two hybrid peptides of cecropin A and melittin [CA(1-8)M(1-18) and CA(1-7)M(2-9)] with liposomes was studied by differential scanning calorimetry (DSC), circular dichroism (CD), and quasi-elastic light scattering (QELS). The study was carried out with large unilamellar vesicles (LUVs) of three different lipid compositions: 1,2-dimyristoil-sn-glycero-3-phosphocholine (DMPC), 1,2-dimyristoyl-sn-glycero-3-phospho-rac-(1-glycerol) (DMPG) and a binary mixture of DMPC/DMPG, in a wide range of peptide-to-lipid (P:L) molar ratios (0 to 1:7). DSC results indicate that, for both peptides, the interaction depends on membrane composition, with very different behavior for zwitterionic and anionic membranes. CD data show that, although the two peptides have different secondary structures in buffer (random coil for CA(1-7)M(2-9) and predominantly beta-sheet for CA(1-8)M(1-18)), they both adopt an alpha-helical structure in the presence of the membranes. Overall, results are compatible with a model involving a strong electrostatic surface interaction between the peptides and the negatively charged liposomes, which gives place to aggregation in the gel phase and precipitation after a threshold peptide concentration. In the case of zwitterionic membranes, a progressive surface coverage with peptide molecules destabilizes the membrane, eventually leading to membrane disruption. Moreover, delicate modulations in behavior were observed depending on the peptide.     

A solvent-controlled switch of manganese complex assemblies with a beta-diketonate-based ligand

The coordination properties of the new polynucleating ligand H(3)L1 (1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene) with Mn(II/III) are described. Depending on the solvent used, the reaction of H(3)L1 with Mn(OAc)(2) yields either of the two new multinuclear assemblies [Mn(2)(HL1)(2)(py)(4)] (1) and [Mn(3)(HL1)(3)] (2), as revealed by X-ray crystallography. The structure of 2 is remarkable in that it shows a unique asymmetric triple-stranded helicate. Complexes 1 and 2 can be interconverted by controlling the solvent of the reaction system, and therefore, this ensemble constitutes an interesting externally addressable switch. In the presence of Mn(III)/pyridine, partial degradation of H(3)L1 occurs via oxidative cleavage, and the new complex [Mn(2)(L2)(2)(py)(4)] (3) is formed. The crystal structure of this complex has shown the fully deprotonated form of the new donor H(3)L2 (3-(3-oxo-3-phenylpropionyl)-5-methylsalicylic acid). From the same reaction, the Mn(II) complex 1 is also obtained. A rational synthesis of H(3)L2 is reported, and this has been used to prepare 3 in high yields, directly from its components. Variable-temperature magnetic susceptibility (chi(m)) measurements were performed on complexes 1-3 under a magnetic field of 1 kG. The data for each complex were fit to the appropriate chi(m) vs T theoretical equation, respectively. In 1, the Mn(II) ions are uncoupled, with g = 2.01. The data from 2 were fit by assuming the presence of an exchange coupled Mn(II)...Mn(II) pair next to a magnetically isolated Mn(II) center. The fit gave J = -2.75 cm(-1), g(12) = 1.97, and g(3) = 1.92, respectively. In 3, two models fit the experimental data. In the most satisfactory, the Mn(III) ions are coupled antiferromagnetically with J = -1.48 cm(-1) and g = 1.98 and a term for weak ferromagnetic intermolecular exchange is included with zJ' = 0.39 cm(-1). The other model contemplates the presence of two uncoupled zero field split Mn(III) ions.     

Evaluation of the In Vitro Wound-Healing Potential of Ayahuasca

Ayahuasca is an Amazonian drink, which contains β-carboline alkaloids and N,N-dimethyltryptamine. The aim of this study was to evaluate the healing potential of decoctions of a commercial mixture, four individual plants and four mixtures of two plants used in the ayahuasca preparation. Thus, the cytotoxic potential of the samples was evaluated and a wound-healing assay was performed with a NHDF cell line. Subsequently, a parallel artificial membrane permeability assay was also performed, to verify if any psychoactive compound could be absorbed by skin fibroblasts. The integrity and permeability of the cell layer were also evaluated, using the transepithelial electrical resistance assay and Lucifer yellow permeability assay, respectively. The compounds absorbed by the cell layer were quantified by high-performance liquid chromatography coupled to a diode array detector. The results showed that only one sample showed cytotoxicity and all the others promoted the migration of skin fibroblasts. Additionally, it was also verified that β-carbolynic alkaloids and N,N-dimethyltriptamine were not absorbed by the cell layer, and in general, did not interfere with its permeability and integrity. To the best of our knowledge, this is the first study where ayahuasca’s wound-healing potential was evaluated.     

GC-MS Chemical Characterization and Antibacterial Effect of the Essential oil of Piper mosenii

Commercialized mouthwashes are generally expensive for the most financially vulnerable populations. Thus, several studies evaluate the antimicrobial potential of herbal products, such as essential oils, to reduce the activity of microorganisms in the mouth. The objective of this research was to carry out the chemical characterization and antibacterial activity of the essential oil of Piper mosenii (EOPm), providing data that enable the development of a low-cost mouthwash formulation aimed at vulnerable communities. The analysis of the antibacterial potential and modulator of bacterial resistance was verified by the microdilution method to determine the minimum inhibitory concentration-MIC. The chemical components were characterized by gas chromatography coupled to mass spectrometry, where 23 chemical constituents were detected, with α-pinene, being the major compound. The EOPm showed a MIC ≥ 1024 µg/mL for all bacterial strains used in the tests. When the EOPm modulating activity was evaluated together with chlorhexidine, mouthwash and antibiotics against bacterial resistance, the oil showed a significant synergistic effect, reducing the MIC of the products tested in combination, in percentages between 20.6% to 96.3%. Therefore, it is recommended to expand the tests with greater variation of EOPm concentration and the products used in this research, in addition to the evaluation of toxicity and in vivo tests, seeking the development of a possible formulation of mouthwash accessible to the vulnerable population.     

Comparison of Two Bovine Commercial Xenografts in the Regeneration of Critical Cranial Defects

Autologous bone is the gold standard in regeneration processes. However, there is an endless search for alternative materials in bone regeneration. Xenografts can act as bone substitutes given the difficulty of obtaining bone tissue from patients and before the limitations in the availability of homologous tissue donors. Bone neoformation was studied in critical-size defects created in the parietal bone of 40 adult male Wistar rats, implanted with xenografts composed of particulate bovine hydroxyapatite (HA) and with blocks of bovine hydroxyapatite (HA) and Collagen, which introduces crystallinity to the materials. The Fourier-transform infrared spectroscopy (FTIR) analysis demonstrated the carbonate and phosphate groups of the hydroxyapatite and the amide groups of the collagen structure, while the thermal transitions for HA and HA/collagen composites established mainly dehydration endothermal processes, which increased (from 79 °C to 83 °C) for F2 due to the collagen presence. The xenograft’s X-ray powder diffraction (XRD) analysis also revealed the bovine HA crystalline structure, with a prominent peak centered at 32°. We observed macroporosity and mesoporosity in the xenografts from the morphology studies with heterogeneous distribution. The two xenografts induced neoformation in defects of critical size. Histological, histochemical, and scanning electron microscopy (SEM) analyses were performed 30, 60, and 90 days after implantation. The empty defects showed signs of neoformation lower than 30% in the three periods, while the defects implanted with the material showed partial regeneration. InterOss Collagen material temporarily induced osteon formation during the healing process. The results presented here are promising for bone regeneration, demonstrating a beneficial impact in the biomedical field.     

Magnetic Torus Microreactor as a Novel Device for Sample Treatment via Solid-Phase Microextraction Coupled to Graphite Furnace Atomic Absorption Spectroscopy: A Route for Arsenic Pre-Concentration

This work studied the feasibility of using a novel microreactor based on torus geometry to carry out a sample pretreatment before its analysis by graphite furnace atomic absorption. The miniaturized retention of total arsenic was performed on the surface of a magnetic sorbent material consisting of 6 mg of magnetite (Fe₃O₄) confined in a very small space inside (20.1 µL) a polyacrylate device filling an internal lumen (inside space). Using this geometric design, a simulation theoretical study demonstrated a notable improvement in the analyte adsorption process on the solid extractant surface. Compared to single-layer geometries, the torus microreactor geometry brought on flow turbulence within the liquid along the curvatures inside the device channels, improving the efficiency of analyte–extractant contact and therefore leading to a high preconcentration factor. According to this design, the magnetic solid phase was held internally as a surface bed with the use of an 8 mm-diameter cylindric neodymium magnet, allowing the pass of a fixed volume of an arsenic aqueous standard solution. A preconcentration factor of up to 60 was found to reduce the typical “characteristic mass” (as sensitivity parameter) determined by direct measurement from 53.66 pg to 0.88 pg, showing an essential improvement in the arsenic signal sensitivity by absorption atomic spectrometry. This methodology emulates a miniaturized micro-solid-phase extraction system for flow-through water pretreatment samples in chemical analysis before coupling to techniques that employ reduced sample volumes, such as graphite furnace atomic absorption spectroscopy.