Triazine based Mn (II) and Mn (II)/Ln (III) complexes: Synthesis,characterization and catecholase activities

In the current work, two triazine‐based multidentate ligands (H₂L¹ and H₂L²) and their homo‐dinuclear Mn (II), mononuclear Ln (III) and hetero‐dinuclear Mn (II)/Ln (III) (Where Ln: Eu or La) complexes were synthesized and characterized by spectroscopic and analytical methods. Single crystals of a homo‐dinuclear Mn (II) complex {[Mn (HL¹)(CH₃OH)](ClO₄·CH₃OH}₂ ( 1 ) were obtained and the molecular structure was determined by X‐ray diffraction method. In the structure of the complex, each Mn (II) ion is seven‐coordinate and one of the phenolic oxygen bridges two Mn (II) centre forming a dimeric structure. The UV–Vis. and photoluminescence properties of synthesized ligands and their metal complexes were investigated in DMF solution and the compounds showed emission bands in the UV–Vis. region. The catecholase enzyme‐like activity of the complexes were studied for 3,5‐DTBC → 3,5‐DTBQ conversion in the presence of air oxygen. Homo‐dinuclear Mn (II) complexes ( 1 and 4 ) were found to efficiently catalyse 3,5‐DTBC → 3,5‐DTBQ conversion with the turnover numbers of 37.25 and 35.78 h^?1 (k_cat), respectively. Mononuclear Eu (III) and La (III) complexes did not show catecholase activity.     

Cobalt(II), nickel(II) and copper(II) complexes of a Schiff base ligand: synthesis,structural characterization and luminescence properties

A Schiff base ligand (HL), 2,4-dimethoxy-N-(5-chloro-2-hydroxybenzylidene)-benzenamine, derived from 5-chloro-2-hydroxybenzaldehyde and 2,4-dimethoxyaniline, and its metal complexes [Co(L)₂]·CH₃OH (1), [Ni(L)₂] (2), [Cu(L)₂] (3) have been synthesized. The compounds were characterized by analytical and spectroscopic methods. In addition, the structures of the Schiff base HL and its Co(II) complex were determined by single-crystal X-ray analysis. The Co(II) center is six-coordinate, being coordinated to two imine nitrogen, two phenolate oxygen and two methoxy oxygen atoms of two crystallographically independent Schiff base ligands. Luminescence properties of HL and its complexes were investigated both in solution and in the solid state.     

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Microwave-induced combustion synthesis and characterization of NixCo1−xFe2O4 nanocrystals (x = 0.0, 0.4, 0.6, 0.8, 1.0)

A series of Ni-doped cobalt ferrites Ni_xCo1_−xFe₂O₄ (x = 0.0, 0.4, 0.6, 0.8, and 1.0) were prepared using microwave-induced combustion. Nickel, cobalt, and ferric nitrates were used as starting materials and glycine as fuel. The influence of Ni content on the lattice parameter, stretching vibrations, and magnetization was studied. XRD, FTIR, and SEM were used for structure, composition, and morphology investigation. A porous network structure was observed with average particle size 60–67 nm. All samples had a cubic spinel structure. The unit cell parameter “a” decreases linearly with nickel concentration due to the smaller ionic radius of nickel. Magnetization measurements showed that coercivity decreased as Ni content increased; it increased with decreasing temperature.      

Determination of fatty acid compositions and cholesterol levels of some freshwater fish living in Porsuk Dam,Turkey

We determined the oil content, fatty acid composition, and cholesterol content of common carp (Cyprinus carpio), crucian carp (Carassius carassius), chub (Leusiscus cephalus), and tench (Tinca tinca) by GLC. The saturated fatty acids (SFA), monounsaturated fatty acids (MUFA), and polyunsaturated fatty acids (PUFA) levels were found to be 36.49%, 31.92%, 31.59% in common carp; 32.92%, 32.21%, and 34.87% in crucian carp; 36.19%, 32.91%, and 30.90% in chub; and 32.86%, 30.77%, and 36.37% in tench, respectively. The cholesterol (mg/100 g oil) levels of common carp, crucian carp, chub, and tench were determined by GLC methods as 119 ± 2.64 mg, 170.37 ± 2.36 mg, 94.68 ± 3.13 mg, and 179.84 ± 6.75 mg, respectively. Thus, the cholesterol contents of the analyzed freshwater fish species were low but their PUFA contents and nutritional values were high. Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 15–17, January–February, 2009.     

A green chemical route for the synthesis of Mn3O4 nanoparticles

A novel environmental friendly, room temperature route using an ionic liquid 1-n-butyl-3-methylimidazolium hydroxide ([BMIM]OH) for the synthesis of Mn₃O₄ nanoparticles is presented. The product was characterized using Fourier transform infrared spectroscopy, X-ray powder diffraction, and transmission electron microscopy. Phase purity was confirmed by XRD, and X-ray line profile fitting determined a crystallite size of 42 ± 11 nm. TEM analysis revealed various morphologies. EPR measurements have indicated the existence of long-range interactions, due to the wide range of particle sizes and morphologies observed.      

Crystal Structure of Bis(5,17-dihydroxy-3,7,15,19,25,26-hexa-azatricyclo(19.3.1.19,13)hexacosa-1(25),2,7,9(26),10,12,14,19,21,23-decaene-μ1,2-perchlorato barium) diperchlorate: a Schiff-Base Macrocyclic Complex Derived from 2,6-Diformylpyridine and 1,3-Diaminopropan-2-ol

Abstract  

The title complex, [Ba(L1)(μ_1,2-ClO₄)]₂(ClO₄)₂ (where L1 = 5,17-dihydroxy-3,7,15,19,25,26-hexa-azatricyclo(19.3.1.19,13)hexacosa-1(25),2,7,9(26),10,12,14,19,21,23-decaene), was synthesised by a Schiff base condensation of 2,6-diformylpyridine with 1,3-diaminopropan-2-ol in dry methanol using barium(II) as template ion. The complex was characterised by IR, ¹H NMR, mass spectrometry, elemental analysis and X-ray crystallography. The structure was solved in the triclinic space group P [`\text1] {\bar{\text{1}}} with a = 8.4587(9), b = 8.7360(9), c = 17.7722(19) ?, α = 79.786(2), β = 88.780(2), γ = 83.048(2)°, V = 1283.0(2) ?³, Z = 1 and R1 = 0.0433. The macrocycle is folded and the complex dimerises via perchlorate anions which bridge the barium ions, and this interaction is supported by hydrogen bonding between neighbouring alcohol groups. The dimers are further linked into chains via intermolecular O–H···OClO₃ hydrogen bonds.     

Synthesis and stereochemistry of some novel dihydropyrrolo[3,4-c]pyrazoles

Abstract  

Eleven novel dihydropyrrolo[3,4-c]pyrazole derivatives were obtained by the reaction of chiral (1R)-N-(1-phenylethyl)maleimide and C,N-aryl-substituted nitrilimines. The reaction afforded the cycloadducts as a regioisomeric mixture which can be separable in some cases. The structure and stereochemistry of cycloadducts were assigned on the basis of infrared (IR), ¹H and ¹³C nuclear magnetic resonance (NMR), mass and X-ray spectra, optical rotation measurements, and CHN analyses.     

Synthesis of Block Copolymers by Combination of Atom Transfer Radical Polymerization and Visible Light‐Induced Free Radical Promoted Cationic Polymerization

A new synthetic approach for the preparation of block copolymers by mechanistic transformation from atom transfer radical polymerization (ATRP) to visible light‐induced free radical promoted cationic polymerization is described. A series of halide end‐functionalized polystyrenes with different molecular weights synthesized by ATRP were utilized as macro‐coinitiators in dimanganese decacarbonyl [Mn₂(CO)₁₀] mediated free radical promoted cationic photopolymerization of cyclohexene oxide or isobutyl vinyl ether. Precursor polymers and corresponding block copolymers were characterized by spectral, chromatographic, and thermal analyses.     

Symmetries of boundary layer equations of power-law fluids of second grade

A modified power-law fluid of second grade is considered. The model is a combination of power-law and second grade fluid in which the fluid may exhibit normal stresses, shear thinning or shear thickening behaviors. The equations of motion are derived for two dimensional incompressible flows, and from which the boundary layer equations are derived. Symmetries of the boundary layer equations are found by using Lie group theory, and then group classification with respect to power-law index is performed. By using one of the symmetries, namely the scaling symmetry, the partial differential system is transformed into an ordinary differential system, which is numerically integrated under the classical boundary layer conditions. Effects of power-law index and second grade coefficient on the boundary layers are shown and solutions are contrasted with the usual second grade fluid solutions.