A photochemical method for patterning the immobilization of ligands and cells to self-assembled monolayers

This work describes a chemically well defined method for patterning ligands to self-assembled monolayers (SAMs) of alkanethiolates on gold. This method begins with monolayers presenting a nitroveratryloxycarbonyl (NVOC)-protected hydroquinone which is photochemically irradiated to reveal a hydroquinone group. The resulting hydroquinone is then oxidized to the corresponding benzoquinone, providing a site for the Diels-Alder mediated immobilization of ligands. The rate constant for the photochemical deprotection is 0.032 s(-1) (with an intensity of approximately 100 mW/cm(2) between 355 and 375 nm), corresponding to a half-life of 21 s. The hydroquinone is oxidized to the benzoquinone using either electrochemical or chemical oxidation and then functionalized by reaction with a cyclopentadiene-tagged ligand. Two methods for patterning the immobilization of ligands are described. In the first, the substrate is illuminated through a mask to generate a pattern of hydroquinone groups, which are elaborated with ligands. In the second method, an optical microscope fit with a programmable translational stage is used to write patterns of deprotection which are then again elaborated with ligands. This technique is characterized by the use of well-defined chemical reactions to control the regions and densities of ligand immobilization and will be important for a range of applications that require patterned ligands for biospecific interactions.     

Ion exchangers as catalysts. II. Catalytic decomposition of hydrogen peroxide with resin-ethylenediamine-copper(II) complex ions

Summary The slow decomposition of H₂O₂ in the presence of Dowex-50 W resin in the form of an ethylenediaminecopper(II) complex ion in water is accompanied by an induction period. The reaction is first order with respect to [H₂O₂] and the rate constant (perg of dry resin) was deduced. Autocatalytic behaviour was found for the H₂O₂ decomposition with 2% crosslinked divinylbenzene. The induction period disappeared and the reaction rate increased when the decomposition was carried out with a resin in the form of a peroxo-copper complex, which proves that the formation of an intermediate (active species) retards the reaction rate. The precursor of the active species, formed during the induction period, was not the amine-copper(II) complex ion but a product of the latter with H₂O₂. It proved impossible to carry out the decomposition in acid or buffer solutions, in which the resin is regenerated.     

9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans

Reaction between some naphtho[2,1-b]pyrans and 1,1-diphenylethene affords 9,9-diphenyl-1,9,10,10a-tetrahydro-2H-phenaleno[1,9-bc]pyrans.     

Copper-catalyzed N-arylation of diazoles with aryl bromides using KF/Al2O3: an improved protocol

Copper-catalyzed N-arylation of diazoles can be accomplished using air-stable CuI as a copper source and 1,10-phenanthroline in the presence of KF/Al₂O₃ as a base. This is a simple and efficient method for the coupling of aryl bromide with diazoles. Different functionalized aryl bromides were coupled with diazoles using this system.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Preparation of cadmium selenide-polyolefin composites from functional phosphine oxides and ruthenium-based metathesis

Cadmium selenide nanoparticles, prepared by known methods, were stabilized with functional phosphine oxide 1, then used to support the polymerization of cyclic olefins radially outward from the surface by ruthenium-catalyzed ring-opening metathesis polymerization (ROMP). The conversion of compound 1 into the new metathesis catalyst 3 by carbene exchange and the subsequent polymerization of cyclic olefins were observed spectroscopically by (1)H NMR to afford for example CdSe-polycyclooctene composite 6. Transmission electron micrographs on thin films of these composites showed good nanoparticle dispersion. This is in stark contrast to the substantial nanoparticle aggregation observed when similar polymerizations were performed in the presence of conventional TOPO-covered nanoparticles. The methods reported here to prepare composite product 6 are applicable to other cyclic olefins, and suggest that this chemistry will be useful for incorporating CdSe nanoparticles into a wide variety of polymer matrices.     

Changes produced in the electrical resistivity of ErH2 thin films when converted to ErH3 due to hydrogen treatment

The resistivity of thin films (80–200 Å) of ErH₂ increases sharply when heated for 2 h at 300 °C in vacuum in the presence of hydrogen gas at 10^–2 Torr. This confirms that the films, originally metallic conductor, have become converted to semiconducting ErH₃ which is in conformity with the structural studies. The negative values of TCR also indicate the semiconducting nature of the hydrogen treated films. Activation energies of the films have been evaluated.     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).     

Total synthesis of (+/-)-stemodinone via an efficient ring-exchange strategy

A total synthesis of (+/-)-stemodinone, a tetracyclic stemodane diterpene, from the known tricyclic methyl olefin 11 is described. The key steps involve an efficient ring-exchange reaction and palladium(0)-catalyzed lactone migration. The ring-exchange strategy for controlling the stereochemistry was based on an initial Diels-Alder reaction to form a new ring followed by cleavage of the original ring. Cleavage of the original ring of the Diels-Alder adduct 9 was achieved by an initial regio- and chemoselective Baeyer-Villiger oxidation followed by the Pd(0)-catalyzed lactone-migration reaction reported by us.     

Total synthesis of (+)-xyloketal D, a secondary metabolite from the mangrove fungus Xylaria sp.

(+)-Xyloketal D was prepared in a one-pot multistep domino reaction by heating optically active 5-hydroxy-4-methyl-3-methylenepentan-2-one (R) in toluene with 2,4-dihydroxyacetophenone. The absolute configuration of the natural product was confirmed by preparation of the starting enone from a lactone of established absolute configuration.