Qualitative and quantitative analyses of Epimedium wushanense by high-performance liquid chromatography coupled with diode array detection and electrospray ionization tandem mass spectrometry

A new HPLC-DAD-ESI-MS(n) method was developed for rapid separation, characterization and quantitation of flavonoids in Epimedium wushanense, a popular Chinese herbal medicine. For qualitative identification, a total of 37 compounds were characterized from the underground and aerial parts of E. wushanense. Among them, 28 compounds were prenylated flavonoids, and 23 were confirmed by comparing with reference standards. For quantitative analysis, 12 major flavonoids including kaempferol glycosides, desmethylicaritin glycosides, and icaritin glycosides were simultaneously determined by HPLC/UV. Samples were separated on a Waters Symmetry C(18) column at 35 °C eluted with a gradient three-component mobile phase of acetonitrile, methanol, and water containing 0.03% v/v formic acid. All the flavonoids showed good linearity (r(2) ≥0.9997). The recoveries varied from 92.6 to 106.1% at three concentration levels. This method was applied to the determination of 20 samples of different geographical sources, harvesting time, and plant parts. Contents of the predominant flavonoid, epimedin C, ranged from 1.4 to 5.1% in aerial parts and 1.0 to 2.8% in underground parts. The methods established in this paper were simple and reliable and could be used for the quality control of E. wushanense.     

Synthesis of N-(2-pyridyl)indoles via Pd(II)-catalyzed oxidative coupling

Readily available Pd(II) chloride catalysts can catalyze selective and efficient oxidative coupling between N-aryl-2-aminopyridines and internal alkynes to yield N-(2-pyridyl)indoles. This process involves the ortho C-H activation of N-aryl-2-aminopyridines, and CuCl(2) was used as an oxidant. Compared to our previously reported Rh(III)-catalyzed synthesis of this class of product, this method is advantageous with a wider scope of alkynes and cost-effective Pd(II) catalysts. Molecular oxygen can be used as a terminal oxidant.     

Heterogeneous photocatalysis of methylene blue over titanate nanotubes: effect of adsorption

Titanate nanotubes were synthesized with hydrothermal reaction using TiO(2) and NaOH as the precursors and subsequent calcination at 400°C for 2h. The products were characterized with SEM and XRD. Adsorption and photocatalysis of methylene blue over titanate nanotubes and TiO(2) were investigated. The results indicated that titanate nanotubes exhibited a better photocatalytic degradation of methylene blue in a simultaneous adsorption and photodegradation system than that in equilibrium adsorption followed by a photodegradation system, whereas TiO(2) showed no significant differences in photocatalytic activity in the two systems. The methylene blue overall removal efficiency over TNTs in the first system even exceeded that over TiO(2). The different catalytic performances of titanate nanotubes in the two systems were tentatively attributed to different effects of adsorption of methylene blue, i.e., the promoting effect in the former and the inhibition effect in the latter. Decantation experiments showed that the titanate nanotube photocatalyst could be easily separated from the reaction medium by sedimentation. Thus titanate nanotubes with high sedimentation rates and concurrent adsorption represent a new catalyst system with a strong potential for commercial applications.     

萃取动力学光度法测定活化剂铝——铝(Ⅲ)-过氧化氢-铜(Ⅱ)-邻氨基酚/氯仿体系

研究了在pH 5.5的弱酸性介质中, 利用Al(Ⅲ)对Cu(Ⅱ)催化H2O2氧化邻氨基酚显色的指示反应的活化作用.用萃取平衡控制反应时间、水相中邻氨基酚的浓度和反应进行的程度.通过在424 nm下测量有机相的吸光度,建立了萃取催化光度法测定活化剂铝的新方法.方法的线性范围为0.004～0.25 mg/L,检出限为1.6×10 -6 g/L.用于水样和茶叶中铝含量的测定,结果满意.     

稀土钬及铒钇丙氨酸配合物的量热与热分析研究

合成了两种固态稀土丙氨酸配合物[Ho2(Ala)4(H2O)8]Cl6和[ErY(Ala)4(H2O)8](ClO4)6 (Ala为丙氨酸),用量热和热分析方法研究了这两种配合物的热力学性质.用全自动高精密绝热量热计测定了在78～377 K温区内的低温热容.对于[Ho2(Ala)4(H2O)8]Cl6,在214～255 K温区内发现一固-固相变,其相变温度为235.09 K.对于[ErY(Ala)4(H2O)8](ClO4)6,在99～121 K温区内也发现一固-固相变,其相变温度为115.78 K. [Ho2(Ala)4(H2O)8]Cl6固-固相变焓为3.02 kJ• mol－1,相变熵为12.83 J•K－1•mol－1； [ErY(Ala)4(H2O)8](ClO4)6 固-固相变焓为1.96 kJ•mol－1,相变熵为16.90 J•K－1•mol－1.同时,用TG技术在40～800 ℃温区研究了两配合物的热稳定性.由TG/DTG曲线分析可知, [Ho2(Ala)4(H2O)8]Cl6从80 ℃到479 ℃热分解分两步完成, [ErY(Ala)4(H2O)8](ClO4)6从120 ℃到430 ℃热分解分三步完成.     

TiO2纳米膜表面结构形态特征

采用反胶束法制备TiO2纳米溶胶,用浸渍提拉法在不同的条件下制备了三种TiO2多孔纳米薄膜,并利用AFM、SEM、XRD等方法对膜表面结构物理化学特性进行表征.结果表明三种膜基本上由粒径约为59 nm的纳米粒子以不同的方式堆积而成,溶胶刚生成时浸提一次,干燥、焙烧得到膜上纳米粒子分布均匀,所生成的二次粒子粒径最小,二次粒子形成的二次表面粗糙度最小,浸提10次得到膜上纳米粒子间存在较丰富缝隙结构,二次粒子粒径及其形成的表面粗糙度较大,而溶胶制备好陈化6 h后浸提得到的膜上二次粒子粒径最大,表面粗糙度最高.由分形理论估算得到三种膜的分形维数分别是2.22、2.20和2.27. XRD测试表明,膜上TiO2为锐钛矿晶相.这些结果表明,采用不同制备步骤得到的膜,其表面结构形态存在较大的差异.     

Sequencing of sulfonic acid derivatized peptides by electrospray mass spectrometry

We report the application of nanoelectrospray ionization tandem mass spectrometry (nES-MS/MS) and capillary LC/microelectrospray MS/MS (cLC/&mgr;ES-MS/MS) for sequencing sulfonic acid derivatized tryptic peptides. These derivatives were specifically prepared to facilitate low-energy charge-site-initiated fragmentation of C-terminal arginine-containing peptides, and to enhance the selective detection of a single series of y-type fragment ions. Both singly and doubly protonated peptides were analyzed by MS/MS and the results were compared with those from their derivatized counterparts. Model peptides and peptides from tryptic digests of gel-isolated proteins were analyzed. Derivatized singly protonated peptides fragment in the same way by nES-MS/MS as they do by post-source decay matrix-assisted laser desorption/ionization mass spectrometry (PSD-MALDI-MS). They produce fragment ion spectra dominated by y-ions, and the simplified spectra are readily interpreted de novo. Doubly protonated peptides fragment in much the same way as their non-derivatized doubly protonated counterparts. The fragmentation of doubly protonated derivatives is especially useful for sequencing peptides that possess a proline residue near the N-terminus of the molecule. The singly protonated forms of these proline-containing derivatives often show enhanced fragmentation on the N-terminal side of the proline and considerably reduced fragmentation on the C-terminal side. In addition, sulfonic acid derivatization increases the in-source fragmentation of arginine-containing peptides. This could be useful for sequence verification and sequence tagging for use in single stage mass spectrometry. Copyright 2000 John Wiley & Sons, Ltd.     

Extracting the mechanisms and kinetic models of complex reactions from atomistic simulation data

Determining reaction mechanisms and kinetic models, which can be used for chemical reaction engineering and design, from atomistic simulation is highly challenging. In this study, we develop a novel methodology to solve this problem. Our approach has three components: (1) a procedure for precisely identifying chemical species and elementary reactions and statistically calculating the reaction rate constants; (2) a reduction method to simplify the complex reaction network into a skeletal network which can be used directly for kinetic modeling; and (3) a deterministic method for validating the derived full and skeletal kinetic models. The methodology is demonstrated by analyzing simulation data of hydrogen combustion. The full reaction network comprises 69 species and 256 reactions, which is reduced into a skeletal network of 9 species and 30 reactions. The kinetic models of both the full and skeletal networks represent the simulation data well. In addition, the essential elementary reactions and their rate constants agree favorably with those obtained experimentally. © 2019 Wiley Periodicals, Inc.     

The mechanism of ring-opening polymerization of L-lactide by ICl3 catalysts: Halogen bond catalysis or participating in reactions?

The mechanism of ring-opening polymerization of L-lactide by iodine trichloride (ICl₃) catalyst has been explored by using density functional theory (DFT) calculations and three catalytic pathways were proposed. The first and second pathways belong to the halogen bond catalysis, and the third pathway involves the ICl₃ catalysts participating in reactions. When the carbonyl group was maintained involved in the reaction and activated catalytically by the halogen bond, there are two possible pathways. The first pathway involves only one transition state, and the second pathway requires two transition states. There is another pathway in which ICl₃ directly participates in the reaction, it is named the third pathway. Two different transition states of the four-membered rings are generated successively, the transfer of I─O bonds determined the progress of the reaction. Theoretical calculations in this work provide the most basic understanding of ring-opening polymerization of L-lactide by ICl₃ catalysts. © 2019 Wiley Periodicals, Inc.     

Recent advances in nanocollision electrochemistry

Ensemble averaging measurements obscure the link between the electrochemical performance and the specific properties of an individual because of the interplay of inhomogeneity and heterogeneity. Nanocollision electrochemistry has attracted increasing interest because of its extremely high sensitivity, revealing the intrinsic properties of individual entities that are masked in the traditional ensemble measurements. In this perspective review, we summarized the recent developments in nanocollision-based single entity electrochemistry and photoelectrochemistry, the combined nanocollision electrochemistry with the other complementary techniques, as well as accurate data process. In closing, future challenges, opportunities, and destinations related to nanocollison electrochemistry were discussed.