Development of a novel label-free amperometric immunosensor for the detection of okadaic acid

Okadaic acid (OA), a lipophilic phycotoxin is mainly produced by toxigenic dinoflagellates. The need to develop high performing methods for OA analysis able to improve the traditional ones is evident. In this work, a novel experimental methodology for label-free detection of OA was developed. Protein G magnetic beads (protein-G-MBs) modified gold electrode was used to immobilize anti-OA monoclonal antibody (anti-OA-MAb). Preliminary, colorimetric tests were performed in order to validate protein-G-MBs and anti-OA-MAb reaction. Electrochemical detection was carried out by differential pulse voltammetry in ferri/ferrocyanide solution. The limit of detection value obtained (0.5 μg L⁻¹) validated the developed electrochemical immunosensor as a promising tool for routine use. The matrix effect and the recovery rate were also assessed with real samples, showing a good percentage of recovery.     

A New Sol-Gel Derived Optical Fiber Sensor for High Acidity Measurements: Application in Nuclear Fuel Reprocessing

Nuclear fuel reprocessing requires high acidity levels that should be accurately and rapidly controlled in order to optimize extraction yields and process efficiency. A new optical fiber sensor based on a sol-gel film doped with an acid-sensitive indicator has been developed to improve remote and on-line monitoring.The organic molecule was physically incorporated in an acid-catalyzed sol-gel matrix and coated onto the core of a denuded optical fiber. The sensor response was evaluated in synthetic solutions of nitric acid, concentrations ranging from 1 to 10 mol · l^–1. Changes in absorption properties and response characteristics of the sensor, when compared to the indicator in solution, have been discussed. Analytical performances of the sensor, i.e. sensitivity, response time, reversibility and repeatability are very encouraging for the on-line analysis. Viability of the sensor for process measurements depends on the stability which might be improved by a strict control of the sensitive film porosity.     

Automatic Electronic Tongue for On-Line Detection and Quantification of Organophosphorus and Carbamate Pesticides Using Enzymatic Screen Printed Biosensors

This work presents an automatic system, based on an electronic tongue, for resolution of mixtures of three pesticides. Inhibition detections were performed during the steady state of biosensors response. Three biosensors were built using two enzymes, electric eel (EE), genetically-modified Drosophila melanogaster (B131), and electric eel co-immobilized with drosophila melanogaster (BH). Calibrations curves for paraoxon, dichorlvos, and carbofuran were performed in the ranges 0.4–50.4 µM, 0.01–1.01 µM, 0.01–0.41 µM with LOD of 3.91 × 10^?8, 6.30 × 10^?11, and 5.84 × 10^?10, respectively. An artificial neural network (ANN) was used to model the combined response of three pesticides. A set of 19 mixtures were prepared in order to train the artificial neural network, the modeling was validated with a set of 6 spiked samples of river water. The error and recovery yields were found in consistent with expected values.     

Biosensors designed for environmental and food quality control based on screen-printed graphite electrodes with different configurations

Graphite electrodes fabricated by screen-printing have been used as amperometric detectors in biosensors based on NAD(+)-dependent dehydrogenases, tyrosinase, or genetically modified acetylcholinesterases. The mono-enzyme sensors have been optimized as disposable or reusable devices for detection of a variety of substrates important in the food industry ( D-lactic acid, L-lactic acid, acetaldehyde) or in environmental pollution control (phenols and dithiocarbamate, carbamate and organophosphorus pesticides). The sensors were prepared in four configurations differing in enzyme confinement, enzyme immobilization and location of the immobilization agent in the biosensor assembly. Tests on real samples have been performed with the biosensors; D-lactic acid and acetaldehyde have been detected in wine and phenols in air.     

Comparative reactivity of TpRu(L)(NCMe)Ph (L = CO or PMe3): impact of ancillary ligand l on activation of carbon-hydrogen bonds including catalytic hydroarylation and hydrovinylation/oligomerization of ethylene

Complexes of the type TpRu(L)(NCMe)R [L = CO or PMe3; R = Ph or Me; Tp = hydridotris(pyrazolyl)borate] initiate C-H activation of benzene. Kinetic studies, isotopic labeling, and other experimental evidence suggest that the mechanism of benzene C-H activation involves reversible dissociation of acetonitrile, reversible benzene coordination, and rate-determining C-H activation of coordinated benzene. TpRu(PMe3)(NCMe)Ph initiates C-D activation of C6D6 at rates that are approximately 2-3 times more rapid than that for TpRu(CO)(NCMe)Ph (depending on substrate concentration); however, the catalytic hydrophenylation of ethylene using TpRu(PMe3)(NCMe)Ph is substantially less efficient than catalysis with TpRu(CO)(NCMe)Ph. For TpRu(PMe3)(NCMe)Ph, C-H activation of ethylene, to ultimately produce TpRu(PMe3)(eta3-C4H7), is found to kinetically compete with catalytic ethylene hydrophenylation. In THF solutions containing ethylene, TpRu(PMe3)(NCMe)Ph and TpRu(CO)(NCMe)Ph separately convert to TpRu(L)(eta3-C4H7) (L = PMe3 or CO, respectively) via initial Ru-mediated ethylene C-H activation. Heating mesitylene solutions of TpRu(L)(eta3-C4H7) under ethylene pressure results in the catalytic production of butenes (i.e., ethylene hydrovinylation) and hexenes.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

A New Route to Crystalline Salts of the Hydrolytic Dimer of Chromium(III)

Crystalline salts of the hydrolytic dimer of Cr(III), [Cr₂(μ-OH)₂(H₂O)₈]X₄·n H₂O (X = p-toluenesulfonate (tos) or mesitylene-2-sulfonate (dmtos)) have been prepared in good yields via a simple two-step procedure: H⁺ oxidation of Cr metal to give Cr²⁺ (T ≈? 70°) followed by O₂ oxidation, of Cr²⁺ to give the dimer (T ≈? 25°). The mechanism of conversion of Cr²⁺ into the dimer is discussed.     

Importance of the Correlation between Width and Length in the Shape Analysis of Nanorods: Use of a 2D Size Plot To Probe Such a Correlation

Analysis of nanoparticle size through a simple 2D plot is proposed in order to extract the correlation between length and width in a collection or a mixture of anisotropic particles. Compared to the usual statistics on the length associated with a second and independent statistical analysis of the width, this simple plot easily points out the various types of nanoparticles and their (an)isotropy. For each class of nano‐objects, the relationship between width and length (i.e., the strong or weak correlations between these two parameters) may suggest information concerning the nucleation/growth processes. It allows one to follow the effect on the shape and size distribution of physical or chemical processes such as simple ripening. Various electron microscopy pictures from the literature or from the authors′ own syntheses are used as examples to demonstrate the efficiency and simplicity of the proposed 2D plot combined with a multivariate analysis.     

Optimization of the isocratic non-aqueous reverse phase (NARP) HPLC separation of trans/cis-α-and β-carotenes

Non-aqueous reverse phase chromatography was used to optimize the separation of all-trans-α- and β-carotenes and their cis isomers extracted from dried carrots. The technique can easily be applied to routine assays. Optimization was carried out by modifying the concentrations of methylene chloride and acetonitrile, and by studying the influence of temperature on the capacity factors and selectivity. The effect of the type of C 18 stationary phase bonding (mono- and polyfunctional) on separation was also examined. The need for polymeric bonding on the stationary phase is stressed for the realization of the trans/cis isomer separation.     

“Azaphilic addition” of methyl lithium to 3,6-bisalkylthio-1,2,4,5-tetrazines: A remarkable dichotomy

A new type of “azaphilic addition” reaction of methyl lithium to 3,6-bisalkylthio-1,2,4,5-tetrazines has been discovered. Methyl lithium adds at the tetrazine nitrogen of 1 affording 4 while nitrogen nucleophiles displace tetrazine alkylthio groups at carbon affording 3 . The structures of the N-alkyl products were determined by ¹H- and ¹³C-nmr and uv experiments. Reversing the order of methyl lithium addition caused the formation of a bicyclic tetrazine 6 . Grignard reagents add in the same fashion as methyl lithium.