Erratum to: “In vitro biological activity comparison of some hydroxyapatite-based composite materials using simulated body fluid”

The original version of the article was published in Cent. Eur. J. Chem. 11(10) (2013) pp. 1583–1598. Unfortunately, the original version of this article contains a mistake in the affiliation section. The affiliation for R?zvan Stefan is Veterinary Medicine Faculty, University of Agricultural Science and Veterinary Medicine, RO-400372 Cluj Napoca, Romania.     

Activated carbon from bamboo waste modified with iron and its application in the study of the adsorption of arsenite and arsenate

Activated carbon obtained from bamboo waste was synthesised and modified with iron (BAC-Fe) and used for the removal of arsenic from aqueous solutions. Two different adsorption models were used for analysing the data. The adsorption capacities were determined for BAC-arsenite, BAC-Fe-arsenite, BAC-arsenate and BAC-Fe-arsenate, with a qmax (μg g^?1) of 14.89, 19.19, 22.32 and 27.32 respectively. Adsorption capacity varied as a function of pH and modifications to the sorbent. Adsorption isotherms from an aqueous solution of arsenite and arsenates on activated carbons were determined. These adsorption isotherms were consistent with the Langmuir and Freundlich adsorption models. Adsorption kinetics followed a pseudo-first order rate equation, as did the kinetics for BAC-Fe-arsenite and BAC-Fe-arsenate adsorption.      

A Convenient Synthesis of Unsymmetrical N,N′-Disubstitutedα,ω-Diaminoalkanes

A general procedure is described for regiospecific construction of unsymmetrical N-alkyl (or aralkyl)-N′-aryl-α,ω-diaminoalkanes 3 (n=2,3,4) by reduction of N-(ω -arylaminoalkyl)amides 2 with borane. Compounds 2 are readily obtained by condensation of N-(ω-haloalkyl)amides 1 with aromatic amines.     

A Synthesis of Fused Butenoudes

It has been shown that tert-butyldimethylsilylated (Z) 2-carboethoxymethylene cycloalkanols are readily desilylated with concomitant cyclization to give the corresponding butenolides. The (E) isomers are desilylated, but not cyclized under these conditions.     

Sun Exposure over a Lifetime in Australian Adults from Latitudinally Diverse Regions

Spatio‐temporal patterns in sun exposure underlie variations in skin cancer incidence and vitamin D deficiency, indicate effectiveness of sun protection programs and provide insights into future health risks. From 558 adults across four regions of Australia (Brisbane (27°S), Newcastle (33°S), Geelong and the Western Districts of Victoria (37°S) and Tasmania (43°S)), we collected: self‐report data on time‐in‐the‐sun from age 6 years; natural skin color and ethnicity; silicone skin casts (for cumulative skin damage); and serum for vitamin D status. Ambient ultraviolet radiation (UVR) at the location of residence, with time‐in‐the‐sun, was used to calculate a “UVR dose” for each year of life. Individuals maintained their ranking compared to their peers for time‐in‐the‐sun in summer compared to winter and across ages (Spearman rho 0.24–0.84, all P < 0.001). Time‐in‐the‐sun decreased with age in all birth cohorts, and over calendar time. Summer time‐in‐the‐sun increased with increasing latitude (P < 0.001). Seasonal variation in vitamin D status had greater amplitude and vitamin D deficiency increased with increasing latitude. Temporal patterns are consistent with effectiveness of sun protection programs. Higher relative time‐in‐the‐sun persists from childhood through adulthood. Lower summer time‐in‐the‐sun in the warmest location may have implications for predictions of UVR‐related health risks of climate change.     

The role of nanocellulose fibers, starch and chitosan on multipolysaccharide based films

Thin nanocomposite films of thermoplastic starch, chitosan and cellulose nanofibers (bacterial cellulose or nanofibrillated cellulose) were prepared for the first time by solvent casting of water based suspensions of the three polysaccharides. The role of the different bioploymers on the final properties (thermal stability, transparency, mechanical performance and antimicrobial activity) of the films was related with their intrinsic features, contents and synergic effects resulting from the establishment of interactions between them. Thermoplastic starch displays an important role on the thermal stability of the films because it is the most stable polysaccharide; however it has a negative impact on the mechanical performance and transparency of the films. The addition of chitosan improves considerably the transparency (up to 50 % transmittance for 50 % of chitosan, in respect to the amount of starch), mechanical performance and antimicrobial properties (at least 25 % of chitosan and no more than 10 % of cellulose nanofibers are required to observe bacteriostatic or bactericidal activity) but decrease their thermal stability. The incorporation of cellulose nanofibers had the strongest positive impact on the mechanical properties of the materials (increments of up to 15 and 30 MPa on the Young′s modulus and Tensile strength, respectively, for films with 20 % of BC or NFC). Nonetheless, the impact in thermal stability and mechanical performance of the films, promoted by the addition of chitosan and cellulose nanofibres, respectively, was higher than the expected considering their percentage contents certainly because of the establishment of strong and complex interactions between the three polysaccharides.     

Synthesis and characterization of hydrophilic theophylline base compounds and their use as ligands in the microwave assisted Suzuki–Miyaura couplings of halopyridines in water

Xanthine derivatives, caffeine (L1), theobromine (L2), theophylline (L3), 7-(β-hydroxyethyltheophylline) (L4), (7-(2,3-dihydroxypropyl)theophylline) (L5), and theophylline 7-acetic acid (L6) and the acetylated derivatives of the later three (L7–L9) were employed as ligands for the in situ palladium catalyzed Suzuki–Miyaura cross couplings of a series of halogenated pyridines. Optimized conditions were found where the diacetylated ligand (L8) was determined to be the best for this process, producing good to excellent yields in the couplings of halogenated anilines with phenylboronic acid under mild reaction conditions in water using microwave irradiation.     

Multiresidue method for the fast determination of pesticides in nutraceutical products (Camellia sinensis) by GC coupled to triple quadrupole MS

A method based on QuEChERS (quick, easy, cheap, effective, rugged, and safe) has been developed and validated for the determination and quantification of more than 140 pesticides in nutraceutical products obtained from green tea (Camellia sinensis). Extraction was performed with acidified acetonitrile (acetic acid 1%, v/v) and a clean‐up step using primary secondary amine (50 mg), graphitized black carbon (100 mg) and magnesium sulfate (200 mg) was needed. Pesticide determination was achieved utilizing GC coupled to triple quadrupole MS/MS using the selective‐reaction monitoring mode. The total run time was 23 min. Pesticides were quantified using matrix‐matched calibration. Recoveries ranged from 70 to 120% and relative SD was lower than 25% at 10, 50, and 100 μg/kg. LOQs were lower than 10 μg/kg. 148 pesticides were validated. The validated method was applied to commercial nutraceutical products, detecting 4,4‐dichlorobenzophenone (28 μg/kg), o,p′‐dicofol (38 μg/kg) and p,p‐dicofol (44 μg/kg) in a few samples.     

Size does matter! Label-free detection of small molecule–protein interaction

This review is focused on methods for detecting small molecules and, in particular, the characterisation of their interaction with natural proteins (e.g. receptors, ion channels). Because there are intrinsic advantages to using label-free methods over labelled methods (e.g. fluorescence, radioactivity), this review only covers label-free techniques. We briefly discuss available techniques and their advantages and disadvantages, especially as related to investigating the interaction between small molecules and proteins. The reviewed techniques include well-known and widely used standard analytical methods (e.g. HPLC-MS, NMR, calorimetry, and X-ray diffraction), newer and more specialised analytical methods (e.g. biosensors), biological systems (e.g. cell lines and animal models), and in-silico approaches.