法向载荷和滑动速度对GCr15钢干滑动摩擦的影响

本文研究了在干滑动摩擦情况下,GCr15钢与YG8硬质合金对磨时的摩擦系数与法向载荷及滑动速度的关系。结果表明,摩擦系数是随着法向载荷和滑动速度的增加而降低。根据磨损表面发生的变化和磨损表面温度计算,作者认为法向载荷和滑动速度的增加使闪温增高,从而导致了摩擦磨损表面的局部熔化,即形成了边界润滑,故此摩擦系数降低,而且在较高的载荷和滑动速度条件下,不同显微组织材料的摩擦系数之差减小。     

有限长圆柱壳中轴对称弹性瞬态波

有限长的计及剪切变形和转动惯性的弹性圆柱壳的轴对称运动方程经过Laplace变换后转化为一组相空间中的方程。对该方程组作了一些适当的处理后,应用广义射线法,得到了相空间中位移和内力的射线法表达式。采用快速Fourier变换作Laplacl逆变换,即可得到圆柱壳受轴对称冲击载荷时的弹性瞬态波解。     

Purely elastic interfacial instabilities in superposed flow of polymeric fluids

Purely elastic interfacial stability of superposed plane Poiseuille flow of polymeric liquids has been investigated utilizing both asymptotic and numerical techniques. It is shown that these instabilities are caused by an unfavorable jump in the first normal stress difference across the fluid interface. To determine the significance of these instabilities in finite experimental geometries, a comparison between the maximum growth rates of purely elastic instabilities with instabilities driven primarily by a viscosity or a combined viscosity and elasticity difference is made. Based on this comparison, it is shown that purely elastic interfacial instabilities can play a major role in superposed flow of polymeric liquids in finite experimental geometries.     

13顶点金属碳硼烷结构和非线性光学性质的DFT研究

采用量子化学密度泛函理论(DFT)B3LYP/6-31G(d)方法,对4,1,6-MC2B10H1213顶点金属碳硼烷几何构型进行优化,结合有限场(FF)方法计算了它们的极化率和二阶非线性光学(NLO)系数.结果表明,十个13顶点金属碳硼烷分子中1a～6a的二阶NLO系数与其构型纵向扩张呈现相同的规律.分子的前线分子轨道能级差越小,其二阶NLO系数越大.对于不同自旋态的同种金属碳硼烷分子,其偶极矩值为高自旋态大于相应的低自旋态,极化率和二阶NLO系数与自旋多重度没有一致的对应规律,自旋多重度对NLO性质影响不大.     

Spatially controlled SERS patterning using photoinduced disassembly of gelated gold nanoparticle aggregates

Controlling the assembly of the nanoparticles is important because the optical properties of noble metal nanoparticles, such as the surface plasmon resonance (SPR) and surface-enhanced Raman scattering (SERS), are critically dependent on interparticle distances. Among many approaches available, light-induced disassembly is particularly attractive because it enables spatial modification of the optical properties of nanoparticle assemblies. In this study, we prepare gold nanoparticle (AuNP) aggregates in a gel matrix. Irradiation of the gelated AuNP aggregates at 532 nm leads to the disassembly of the aggregates, changing the color (SPR) from dark blue to red and extinguishing the SERS signal along the irradiated pattern, which opens the possibility of facile fabrication of spatially controlled SERS-generating microstructures. The photoinduced disassembly of the AuNP aggregates in solution is also investigated using UV-vis spectroscopy and transmission electron microscopy.     

Self‐Assembly of Discrete Homochiral,Helical, Hydrogen‐Bonded Nanocages: From Vesicles to Microspheres and Tubules Capable of Gelating Solvents

The chiral tris‐monodentate imidazolinyl ligands 1 a – c exhibit a strong tendency to form the discrete, helical [2+3] nanocages 3 ([ 1 ₂ ?2 ₃]) with tartaric acids 2 . Circular dichroism (CD) spectra and theoretical calculations reveal that supramolecular handedness of capsulelike architectures is determined only by the chirality of the imidazolinyl ligands rather than tartaric acids. The chirality of imidazolinyl ligands is transferred to the helicity of the complexes through the directed hydrogen bonds between the N3 atom of imidazoline rings and the carboxyl of tartaric acids. These hydrogen‐bonded nanocages can spontaneously self‐assemble into spherical vesicles, during which the hydrogen bonding that arises from the hydroxyl groups of tartaric acids plays a crucial issue. The vesicles formed by [{(S,S,S)‐ 1 a }₂( 2 ^L)₃] ( 3 a ) may further evolve into microspheres that gelate organic solvents after being aged at ?20 °C for 24 h, and can also be unprecedentedly transformed to tubular assemblies capable of rigidifying the solvents when subjected to ultrasound irradiation.     

Real‐Time Monitoring of Mass‐Transport‐Related Enzymatic Reaction Kinetics in a Nanochannel‐Array Reactor

To understand the fundamentals of enzymatic reactions confined in micro‐/nanosystems, the construction of a small enzyme reactor coupled with an integrated real‐time detection system for monitoring the kinetic information is a significant challenge. Nano‐enzyme array reactors were fabricated by covalently linking enzymes to the inner channels of a porous anodic alumina (PAA) membrane. The mechanical stability of this nanodevice enables us to integrate an electrochemical detector for the real‐time monitoring of the formation of the enzyme reaction product by sputtering a thin Pt film on one side of the PAA membrane. Because the enzymatic reaction is confined in a limited nanospace, the mass transport of the substrate would influence the reaction kinetics considerably. Therefore, the oxidation of glucose by dissolved oxygen catalyzed by immobilized glucose oxidase was used as a model to investigate the mass‐transport‐related enzymatic reaction kinetics in confined nanospaces. The activity and stability of the enzyme immobilized in the nanochannels was enhanced. In this nano‐enzyme reactor, the enzymatic reaction was controlled by mass transport if the flux was low. With an increase in the flux (e.g., >50 μL min^?1), the enzymatic reaction kinetics became the rate‐determining step. This change resulted in the decrease in the conversion efficiency of the nano‐enzyme reactor and the apparent Michaelis–Menten constant with an increase in substrate flux. This nanodevice integrated with an electrochemical detector could help to understand the fundamentals of enzymatic reactions confined in nanospaces and provide a platform for the design of highly efficient enzyme reactors. In addition, we believe that such nanodevices will find widespread applications in biosensing, drug screening, and biochemical synthesis.     

A pH responsive electrochemical switch sensor based on Fe(notpH3) [notpH6 = 1,4,7-triazacyclononane-1,4,7-triyl-tris(methylene-phosphonic acid)

The electrochemistry of a macrocyclic metal complex Fe(notpH₃) [notpH₆ = 1,4,7-triazacyclononane-1,4,7-triyl-tris(methylene-phosphonic acid)] reveals that the protonation/deprotonation of the non-coordinated P-OH groups in Fe(notpH₃) affects its formal potential value (E⁰′) considerably. Plotting E⁰′ as function of solution pH gives a straight line with a slope of −585 mV pH⁻¹ in the pH range of 3.4-4.0, which is about ten times larger than the theoretical value of −58 mV pH⁻¹ for a reversible proton-coupled single-electron transfer at 20 °C. A sensitive pH responsive electrochemical switch sensor is thus developed based on Fe(notpH₃) which shows an “on/off” switching at pH ∼ 4.0.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Evaluation of a new electrolytic cold vapor generation system for mercury determination by AFS

In this study we firstly report a new electrolytic cold vapor generation system for mercury determination on Pt/Ti cathode in the presence of organic acid catholyte. Comparing with the traditional inorganic acid, formic acid increased the signal intensity of Hg vapor from electrolytic generation on Pt cathode and reduced the impact of cathode erosion on the stability of signal intensity. Moreover, formic acid has better interference tolerance. The introduction location for carrier gas is probably the most important factor that influences the signal intensity of Hg from electrolytic vapor generation. The effects of the electrolytic conditions and interference ions on the ECVG have been studied. Under the optimized conditions, the detection limit (3σ) of Hg (II) in aqueous solutions is 1.4 ng L⁻¹; a relative standard deviation of 2.3% for 1 μg L⁻¹ Hg was obtained. The accuracy of this method was verified by the determination of mercury in the certified reference materials. This system has been applied satisfactorily to the determination of Hg in Traditional Chinese Medicines samples.