Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Trapping H- bound to the nitrogenase FeMo-cofactor active site during H2 evolution: characterization by ENDOR spectroscopy

We here show that the iron-molybdenum (FeMo)-cofactor of the nitrogenase alpha-70(Ile) molybdenum-iron (MoFe) protein variant accumulates a novel S = (1)/(2) state that can be trapped during the reduction of protons to H(2). (1,2)H-ENDOR measurements disclose the presence of two protons/hydrides (H(+/)(-)) whose hyperfine tensors have been determined from two-dimensional field-frequency (1)H ENDOR plots. The two H(+/)(-) have large isotropic hyperfine couplings, A(iso)( )() approximately 23 MHz, which shows they are bound to the cofactor. The favored analysis for these plots indicates that the two H(+/)(-) have the same principal values, which indicates that they are chemically equivalent. The tensors are further related to each other by a permutation of the tensor components, which indicates an underlying symmetry of binding relative to the cofactor. At present, no model for the structure of the iron-molybdenum (FeMo)-cofactor in the S = (1)/(2) state trapped during the reduction of H(+) can be shown unequivocally to satisfy all of the constraints generated by the ENDOR analysis. The data disfavors any model that involves protonation of sulfides, and thus suggests that the intermediate instead contains two chemically equivalent bound hydrides; it appears unlikely that these are terminal monohydrides.     

A mild and efficient method for halogenation of 3,5-dimethyl pyrazoles by ultrasound irradiation using N-halosuccinimides

The 4-halo-3,5-dimethyl pyrazoles have been synthetisized in good yields in short reaction times in the absence of a catalyst by reaction of 3,5-dimethyl pyrazoles with N-halosuccinimides (NBS, NCS and NIS) under ultrasound irradiation. Finally, the halogenation of pyrazoles with Br₂, ICl and I₂ was showed in similar conditions.     

pKa calculations in solution and proteins with QM/MM free energy perturbation simulations: a quantitative test of QM/MM protocols

The accuracy of biological simulations depends, in large part, on the treatment of electrostatics. Due to the availability of accurate experimental values, calculation of pKa provides stringent evaluation of computational methods. The generalized solvent boundary potential (GSBP) and Ewald summation electrostatic treatments were recently implemented for combined quantum mechanical and molecular mechanics (QM/MM) simulations by our group. These approaches were tested by calculating pKa shifts due to differences in electronic structure and electrostatic environment; the shifts were determined for a series of small molecules in solution, using various electrostatic treatments, and two residues (His 31, Lys 102) in the M102K T4-lysozyme mutant with large pKa shifts, using the GSBP approach. The calculations utilized a free energy perturbation scheme with the QM/MM potential function involving the self-consistent charge density functional tight binding (SCC-DFTB) and CHARMM as the QM and MM methods, respectively. The study of small molecules demonstrated that inconsistent electrostatic models produced results that were difficult to correct in a robust manner; by contrast, extended electrostatics, GSBP, and Ewald simulations produced consistent results once a bulk solvation contribution was carefully chosen. In addition to the electrostatic treatment, the pKa shifts were also sensitive to the level of the QM method and the scheme of treating QM/MM Coulombic interactions; however, simple perturbative corrections based on SCC-DFTB/CHARMM trajectories and higher level single point energy calculations were found to give satisfactory results. Combining all factors gave a root-mean-square difference of 0.7 pKa units for the relative pKa values of the small molecules compared to experiment. For the residues in the lysozyme, an accurate pKa shift was obtained for His 31 with multiple nanosecond simulations. For Lys 102, however, the pKa shift was estimated to be too large, even after more than 10 nanosecond simulations for each lambda window; the difficulty was due to the significant, but slow, reorganization of the protein and water structure when Lys 102 was protonated. The simulations support that Lys 102 is deprotonated in the X-ray structure and the protein is highly destabilized when this residue is protonated.     

Computational studies of the 3-Dimensional structure of cyclopenta polycyclic aromatic hydrocarbons containing a gulf region

Recently, some cyclopenta-fused polyaromatic hydrocarbons, an environmentally relevant subclass of chemicals, have been shown to have carcinogenic activity in animals. It has been suggested that benz[l] aceanthrylene ( I ), an active member of this subclass with a gulf region, has a trans dihydrodiol metabolite that is nonplanar and has two distinct spatial configurations. We have used MMP 2(85) and AM 1 to investigate the three-dimensional structure of this dihydrodiol and other similar derivatives of ( I ) and have found that although ( I ) is somewhat nonplanar the relevant derivatives are all nearly planar. Further, we have computed potential functions for the bending of the angular ring in the gulf region using MMP 2(85), AM 1, and ab initio computed energies for AM 1 spatial configurations and find that these molecules all have only a single potential minimum. We have performed the same calculations for benzo[c]phenanthren and its 1,12 dimethyl derivative, molecules with a similar gulf region for which crystallographic data exists. In agreement with that data, we find that two distinct spatial configurations exist separated by significant barries. The differences between the results generated by the three different methods of computation will be discussed.     

Occurrence of Neighboring Group Participation Reactions in Amide-N and Amidine Complexes Derived from Pentaammine(dinitrile)cobalt(III) Ions

N-Bonded pentaamminecobalt(III) complexes of 2-cyanobenzamide, 2-cyanoacetamide, and fumaric, succinic, glutaric, and adipic amide-nitriles have been prepared. The kinetics of the base hydrolysis of (succinonitrile)pentaamminecobalt(III) have been measured: k(obsd) = k(OH) [OH(-)]; k(OH) = 1.23 x 10(3) {I = 1.00 M (NaCH(3)COO), 25 degrees C}. Amido-N-coordinated 2-cyanobenzamide cyclized in aqueous base, and it forms [(1-oxo-3-iminoisoindolino-endo-N)pentaamminecobalt(III). In aqueous acid it protonates on the exo-imine and solvolyzes (k(H) = 7.9 x 10(-)(5) s(-)(1)), forming the pentaammineaquacobalt(III) complex and 1-oxo-3-iminoisoindoline. In aqueous acid the amido-N complexes are protonated on the amide oxygen. The 2-cyanobenzamide species rearranges to form the nitrile-bonded linkage isomer in aqueous acid and also in Me(2)SO-d(6), while the succinic amide nitrile complex rearranges more slowly in aqueous acid to form solely the nitrile-bonded linkage isomer. The kinetics of the reaction were k(obsd) = f(k(H)[H(+)]/(K(a) + [H(+)])) where k(H) = 3.4 x 10(-)(4) M(-)(1) s(-)(1) and K(a) = 6.76 x 10(-)(2) M, pK(a) 1.2; pK(a) 1.3 (spectrophotometric) {I = 1.00 M (LiClO(4).3H(2)O), 25 degrees C}. In Me(2)SO-d(6) this amide-N complex reacts by three pathways: solvolysis, amide-N to -O isomerization, and amide-N to nitrile-bonded rearrangement (10%). The conjugate acid of the 2-cyanoacetamido-N complex reacted in both aqueous acid and acidified Me(2)SO-d(6) by solvolysis, amide N to O isomerization, and amide-N to nitrile-bonded rearrangement (17% in each solvent). The fumaric, glutaric, and adipic amide-nitrile complexes bonded through the amide nitrogen react only by solvolysis and amide-N to -O isomerization. Pentaamminecobalt(III) complexes of 2-cyanobenzamidine and succinic, glutaric, and adipic amidine-nitriles bonded through the amidine secondary nitrogen have been prepared. The 2-cyanobenzamidine complex undergoes rapid ligand cyclization to form the corresponding complex of 1,3-diiminoisoindoline bonded through the deprotonated endocyclic nitrogen. In aqueous acid the complex is protonated on one of the exo-imines, and this solvolyzes to form the pentaammineaquacobalt(III) complex and 1,3-diiminoisoindoline {k(H) = 1.7 x 10(-)(3) s(-)(1) (0.5 M HCl, 25 degrees C). Coordinated succinic amidine-nitrile also cyclizes in liquid ammonia to yield the complex of 2,5-diiminopyrrolidine bonded through the deprotonated endocyclic nitrogen. This is stable in aqueous base but solvolyzes rapidly (t(1/2) (s)) in aqueous acid to the aqua complex and succinimide; the latter is formed by hydrolysis of the free 2,5-diiminopyrrolidine. The dinuclear complex &mgr;-decaammine(succinonitrile)dicobalt(III) was synthesized; in aqueous base it forms &mgr;-(succinamido-N)decaamminecobalt(III). The dinuclear dinitrile complex reacts in liquid ammonia to form the corresponding succinic amidine-nitrile species which cyclizes rapidly to form &mgr;-decaammine(2,5-diiminopyrrolidino)cobalt(III) in which the ligand is bonded to cobalt(III) through the exo-imines.     

PHOTOCONTROL OF ANTHOCYANIN SYNTHESIS IN TOMATO SEEDLINGS: A GENETIC APPROACH*

The photocontrol of anthocyanin synthesis in dark-grown seedlings of tomato (Lycopersicon esculentum Mill.) has been studied in an aurea (au) mutant which is deficient in the labile type of phytochrome, a high pigment (hp) mutant which has the wild-type level of phytochrome and the double mutant au/hp , as well as the wild type. The hp mutant demonstrates phytochrome control of anthocyanin synthesis in response to a single red light (RL) pulse, whereas there is no measurable response in the wild type and au mutant. After pretreatment with 12 h blue light (BL) the phytochrome regulation of anthocyanin synthesis is 10-fold higher in the hp mutant than in the wild type, whilst no anthocyanin is detectable in the au mutant, thus suggesting that it is the labile pool of phytochrome which regulates anthocyanin synthesis. The au/hp double mutant exhibits a small (3% of that in the hp mutant) RL/far-red light (FR)-reversible regulation of anthocyanin synthesis following a BL pretreatment. It is proposed that the hp mutant is hypersensitive to the FR-absorbing form of phytochrome (P_fr) and that this (hypersensitivity) establishes response to the low level of P_fl. (below detection limits in phytochrome assays) in the au/hp double mutant.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Template-assisted self assembly of two lipophilic polyion aggregates derived from sodium tetraphenyl imidodiphosphinate-complexes containing sodium ions in four different coordination environments

The molecular structures of two lipophilic polyion aggregates derived from tetraphenyl imidodiphosphinate are described: [Na(crown ether)][MNa(2)[Ph(2)P(O)NP(O)Ph(2)](4)] with crown ether = 15-crown-5 for 1and benzo-15-crown-5 for (M = Na(+) for 1 and Na(H(2)O)(+) for 2).     

Persistent bissilylated arenium ions

A series of bissilylated arenium ions 1 with different substitution patterns on the aryl ring have been synthesized by hydride abstraction from 2-aryl-substituted 2,6-dimethyl-2,6-disilaheptanes (2) via transient silylium ions. The arenium ions have been identified by their characteristic NMR chemical shifts, (delta(29)Si=19.1-25.6, delta(13)C(ipso) =89.0-102.4, delta(13)C(ortho)=160.9-182.0, delta(13)C(meta)=132.5-146.9, delta(13)C(para)=150.2-169.9) supported by quantum mechanical calculations of structures, energies, and magnetic properties at the B3LYP/6-311G(d,p)//B3LYP/6-31G(d) + DeltaZPVE level of theory. The calculations clearly reveal the charge dispersing and stabilizing effect of the silyl substituents in arenium ions 1. The bissilylated benzenium ion 1a is more stable than the parent benzenium ion (C(6)H(7)(+)) by 37.6 kcalmol(-1). The synthesized arenium ions 1 are stable in solution at room temperature for periods ranging from a few hours to days. This unusual stability is attributed to: 1) the thermodynamic stabilization of the arenium ion by two beta-silyl substituents and 2) the essentially non-nucleophilic reaction conditions (the use of the weakly coordinating [B(C(6)F(5))(4)](-) anion and aromatic hydrocarbons as solvents). Addition of stronger nucleophiles than aromatic hydrocarbons (for example, acetonitrile) results in desilylation of the arenium ion 1 and recovery of the 2-aryl-2,6-disilaheptane moiety.